Where to get a replacement key depends on your car's age and key type
You have three main routes: a dealership, a locksmith, or a big-box retailer like Home Depot or Walmart. A dealership will cut and program any key your car needs, but charges the most. A locksmith can often do the same work faster and cheaper, though not all locksmiths handle every car model. Big-box retailers cut basic metal keys on the spot for the lowest price, but cannot program modern keys with computer chips.
The right choice depends on whether your car key has a chip inside it. If your car was made after the mid-1990s, it almost certainly does. A chipped key (called a transponder key) must be programmed to your car's ignition system or it will not start the engine, even if the physical shape is correct. A basic metal key without a chip just needs to be cut to match your original.
Cost varies widely. A basic metal key from a big-box store runs $2 to $10. A locksmith's chipped key typically costs $50 to $150. A dealership replacement ranges from $150 to $500 or more, depending on the car brand and whether you need a fob (the remote button part) as well.
Key Takeaways
- Dealerships can replace any key type but charge the most; locksmiths are usually faster and cheaper for chipped keys; big-box stores are cheapest for basic metal keys only.
- Modern cars use transponder keys with computer chips that must be programmed to your car, not just cut like old metal keys.
- You will need proof of ownership (registration or title) at a dealership, but many locksmiths only need the car's VIN and a photo ID.
- If your key has a fob (remote buttons), replacing it costs more than a key alone and may require dealer-level programming.
- Some dealerships can order a replacement if you have lost all keys; this takes longer but is sometimes your only option for older luxury cars.
How to tell if your key has a chip
Look at your key. If it has a plastic head with a small dark square or rectangle visible inside, it is a transponder key and has a chip. If it is all metal or has a plastic head with no visible chip, it is a basic key. You can also check your car's manual or call your dealership with your vehicle identification number (VIN) — they can tell you in seconds.
The presence of a chip matters because a locksmith or big-box store cannot program it. They can cut the physical shape correctly, but the car's computer will not recognize the key. You would have a key that turns in the lock but does not start the engine. Only a dealership or a specialized automotive locksmith with programming equipment can fix this.
Getting a replacement from a dealership
Call the service department at your car's dealership with your VIN and ask for a key replacement quote. Bring your registration or title and a photo ID. The dealership will cut and program the key on site, usually while you wait, though some locations may take a few hours.
Dealerships are the safest choice if you have lost all your keys or if your car is a newer luxury model with complex security systems. They have access to the exact programming codes for your vehicle and can handle any key type. The downside is cost — expect to pay $200 to $500 for a chipped key and fob, depending on the brand.
If you have only one key left, some dealerships will not replace it without proof that you own the car. Bring your registration or title. If you have lost your title, you may need to show your insurance card or vehicle registration from your state's DMV.
Using a locksmith for faster, cheaper service
A locksmith can cut and program a chipped key for most cars made in the last 20 years. Call a few locksmiths in your area and ask if they handle your car's make and model — not all do, especially for luxury brands. Ask for a quote over the phone. Many locksmiths will come to you, which saves time if your car is not drivable.
Locksmiths typically charge $50 to $150 for a chipped key, compared to $200 to $500 at a dealership. They usually need your VIN, proof of ownership (registration or insurance card), and a photo ID. Some will work with just a photo ID and the VIN if you can show them the car in person.
The risk is that not all locksmiths are equally skilled with car keys. Ask whether they have done your specific car model before. Read online reviews. If a locksmith seems unsure, go to a dealership instead — a failed programming attempt can sometimes lock you out of your car's security system temporarily.
Big-box retailers for basic metal keys only
Home Depot, Walmart, and similar stores have key-cutting machines and can cut a basic metal key in minutes for $2 to $10. This works only if your original key is all metal with no plastic head or chip. Bring your original key with you.
Do not use this option if your car is less than 25 years old or if your original key has any plastic on it. A key cut at a big-box store will fit your car's lock but will not start the engine if a chip is required. You will end up paying for a locksmith or dealership replacement anyway.
What to do if you have lost all your keys
If you have no keys left, you cannot take a key to a big-box store to copy. Call a locksmith or dealership instead. A locksmith can usually make a key from your VIN alone, though some require you to prove ownership. A dealership will need your registration or title.
This situation is more expensive because the locksmith or dealership has to order or program a key without a template. Expect to pay more than a standard replacement — sometimes $100 to $200 extra. Some dealerships can tow your car to their lot and make a key there, which may be your only option if your car is very old or has an unusual security system.
Key fobs and remote buttons
If your key has buttons for locking, unlocking, or opening the trunk, you have a key fob. Replacing just the fob (without cutting a new physical key) costs $50 to $200 at a locksmith or dealership. A dealership replacement fob typically costs $100 to $300.
Some fobs can be reprogrammed by the car owner using a sequence of button presses and ignition turns — check your manual or search your car's make and model online. Others require professional programming. If your fob is broken but your key still works, you can drive the car and have the fob replaced later.
Frequently Asked Questions
Can I get a key made without the original?
Yes. A locksmith or dealership can make a key from your VIN and proof of ownership. A locksmith may do this over the phone or in person; a dealership will need you to visit with your registration or title. This costs more than copying an existing key because they have to order or program it from scratch.
How long does it take to get a replacement key?
A locksmith or dealership can usually cut and program a key the same day, often within an hour. If you order a key by mail or if the dealership has to special-order it, it may take a few days to a week. Big-box stores cut basic keys in minutes.
Will my car insurance cover a lost key?
Most car insurance policies do not cover lost or stolen keys. Check your policy or call your insurer to be sure. Some roadside information plans (like AAA) offer locksmith coverage, which may pay for a replacement key.
What if my key breaks inside the lock?
Do not try to remove it yourself — you may damage the lock. Call a locksmith. They can extract the broken piece and make a new key. This usually costs $75 to $150 and takes an hour or less.
Can I program a key myself?
Some older cars allow you to program a spare key using a sequence of ignition and button presses described in the owner's manual. Most modern cars cannot be programmed this way. Check your manual or call your dealership to learn about your car supports self-programming.