Where to get a new car key depends on your car's age and key type

You have three main routes: the dealership, a locksmith, or an automotive key service. The dealership is the most expensive but works for any car and any key type. A locksmith is faster and cheaper for older cars with standard keys or fobs, but may not handle newer vehicles with computer-linked security systems. An automotive key service sits between them—faster than a dealership, cheaper than a locksmith for complex keys, but not available everywhere.

The right choice depends on whether your key is a straightforward metal blade, a fob with a remote lock button, or a push-button start key that communicates with your car's computer. Newer cars (roughly 2010 onward) often require dealership programming because the key must be paired to your specific vehicle's security system. Older cars are usually fine with any locksmith.

Cost varies widely. A basic metal key from a locksmith might run $10 to $30. A fob-style key can be $50 to $150 from a locksmith or $150 to $300 from a dealership. Push-button start keys are typically $200 to $500 from a dealership. Locksmiths sometimes charge less but may not be able to program newer systems.

Key Takeaways

  • Dealerships can make any key for any car but charge the most; locksmiths are faster and cheaper for older vehicles but may not handle newer security systems.
  • Bring your vehicle identification number (VIN), proof of ownership, and a photo ID to whichever service you choose.
  • Newer cars with push-button start or advanced security systems almost always require dealership programming because the key must communicate with your car's computer.
  • Getting a spare key made before you lose your only one costs far less than an emergency replacement and saves you from being locked out.

The dealership route: may provide to work, most expensive

The dealership can make a new key for any vehicle they sell, regardless of age or complexity. They have access to your car's security codes in their system and can program any key type—standard blade, fob, or push-button start—to match your specific vehicle. This is the only route that works if your car has a modern security system that requires the key to be electronically paired to your car.

You will need your VIN (found on your registration, insurance card, or the driver's side door jamb), proof of ownership (registration or title), and a photo ID. The dealership will verify you own the car before making the key. Turnaround is usually one to three business days, though some dealerships can do it the same day if you wait.

Cost is the main drawback. A basic key fob runs $150 to $300. A push-button start key can be $250 to $500 or more depending on the brand. You are paying for the dealership's access to your car's security codes and their programming equipment, which is specialized and expensive.

The locksmith route: faster and cheaper for older cars

A locksmith can cut a new key and, for many vehicles, program it on the spot. For cars without computer-linked security systems (typically pre-2010 models), a locksmith is usually your fastest and cheapest option. They can often make a key while you wait, sometimes in under an hour.

The catch: locksmiths cannot access your car's security codes the way a dealership can. For newer vehicles with push-button start or advanced immobilizer systems, a locksmith may be able to cut the physical key but cannot program it to communicate with your car. Before you call, ask the locksmith whether they can handle your specific year, make, and model. Many will tell you honestly if they cannot.

You still need your VIN and proof of ownership. Some locksmiths will meet you at your car or home. Costs are typically $50 to $150 for a standard key or fob, significantly less than a dealership. If the locksmith cannot program your key, they can cut it and you will still need to take it to the dealership for programming, which adds a second trip.

Automotive key services and hardware stores

Some hardware stores and automotive retailers offer key-cutting and programming services. These services fall between a locksmith and a dealership in price and capability. They can often handle fobs and some newer key types without sending you to the dealership, and they are usually faster than calling a dealership.

The limitation is that they do not have access to your car's security codes the way a dealership does. They work by reading the security data directly from your car using specialized equipment, which works for many vehicles but not all. Call ahead and describe your car's year, make, and model. They will tell you whether they can do it.

Cost is usually $75 to $200 for a fob or newer key type. Turnaround is often same-day or next-day. This is a good middle option if you want to avoid the dealership's cost but your local locksmith cannot handle your car.

What you need to bring and what happens next

Bring your VIN, proof of ownership (registration or title), and a photo ID to any service. The VIN is the most important—it is how the service identifies your car's security system and pulls the right codes. You can find it on your registration, insurance card, the driver's side door jamb, or under the windshield on the dashboard.

Proof of ownership protects both you and the service. They need to confirm you own the car before they make a key that can start it. A registration or title is standard. Some services will also accept a lease agreement or insurance card.

The service will either cut and program the key on-site (locksmiths and some hardware stores) or order it and have you pick it up later (dealerships usually). If you are locked out of your car right now, a locksmith or automotive service is faster. If you can wait a few days, the dealership is the safest bet for any vehicle.

Getting a spare key made before you need one

The cheapest and least stressful way to handle a lost key is to never be in that situation. Having a spare key made costs a fraction of an emergency replacement and takes minutes. A basic spare key from a locksmith or hardware store costs $10 to $30. A fob spare is $50 to $150. Even a dealership spare for a newer car is cheaper than making a replacement when you are locked out and stressed.

Keep the spare somewhere safe but accessible—not in your car, not in an obvious place at home. A locked drawer, a trusted friend's house, or a find key storage box works. If you have a newer car with push-button start, get the spare made at the dealership so you know it will program correctly.

If you have lost a key and still have one working key, use that working key to get a spare made right away. This prevents a second loss from leaving you completely locked out.

What to do if you are locked out right now

If you cannot get into your car and need a key when ready, call a locksmith first. They are usually faster than a dealership and can often come to you. Have your VIN and proof of ownership ready. If the locksmith says they cannot program your specific car, ask them to cut the key anyway and direct you to the nearest dealership for programming.

If it is after hours and no locksmiths are available, call your car's roadside information program (AAA, your insurance company's roadside service, or the dealership's roadside program if you have one). They can dispatch a locksmith or tow you to a dealership. This costs more than calling a locksmith directly, but it is available 24/7.

Do not try to break into your own car. You risk damaging the door, window, or lock mechanism, which costs far more than a new key. A locksmith or roadside service is always the faster, cheaper option.

Frequently Asked Questions

Can I make a key from just the VIN without the car present?

A dealership can, because they have your security codes on file. A locksmith usually cannot—they need to either read the security data from your car or have the original key to copy from. If your car is at home and you are not, call a locksmith and ask whether they can work from the VIN alone for your specific year and make. Many can for older vehicles.

What if I lost my only key and do not have a spare?

Call a locksmith or your roadside information program. A locksmith can usually make a new key on-site if your car is present. If your car is locked and you cannot get to it, roadside information can tow you to a locksmith or dealership. This is more expensive than having a spare, but it is the fastest way out of the situation.

Will a key from one dealership work on another dealership's car of the same model?

No. Each car has its own unique security codes programmed into the key. A key made for your specific car will not start another car, even if it is the same year, make, and model. This is a security feature designed to prevent theft.

How long does it take to get a new key from a dealership?

It varies by dealership and how busy they are. Same-day service is sometimes possible if you go in person and wait. Most dealerships quote one to three business days. Call ahead and ask—some can tell you over the phone whether they can do it faster.

Can I program a key myself?

For some older cars, yes—there are DIY programming sequences you can find online. For most newer cars, no. The programming requires specialized equipment and access to your car's security codes, which only dealerships and some locksmiths have. If you are unsure, call a locksmith and ask whether your car can be self-programmed.