What wheel spacers do and whether you need them
Wheel spacers are flat rings that sit between your wheel hub and your wheel, pushing the wheel outward from the vehicle's centerline. They increase the distance from the center of the wheel to the vehicle's body — what's called the track width. People install them to change the appearance of their vehicle (wheels sit more flush with the fender), to improve handling on very wide aftermarket wheels, or to fit larger brake components.
Before you buy spacers, understand that they are not required maintenance. They are a modification. Installing them changes how your suspension and steering respond, can affect tire wear, and may void your vehicle's warranty. Some states have regulations about how far wheels can protrude beyond the fender, so check your local vehicle code before purchasing. If you are unsure whether spacers are right for your vehicle, consult a suspension specialist or your vehicle's manufacturer documentation.
Spacers come in different thicknesses, typically ranging from 5mm to 25mm per side, and are made from aluminum or steel. The thickness you need depends on your wheel size, your vehicle's suspension geometry, and how much wider you want the track. Thicker spacers cost more and can put additional stress on wheel bearings and suspension components.
Key Takeaways
- Wheel spacers push your wheels outward and are a modification, not a repair — they change how your vehicle handles and may affect warranty coverage.
- You will need the correct spacer thickness for your vehicle, a jack, jack stands, a lug wrench, and a torque wrench to install them properly.
- The installation process involves lifting the vehicle, removing wheels, sliding spacers onto the hub studs, and reinstalling wheels with the correct lug nut torque.
- After installation, have your wheel alignment checked and monitor your tires for uneven wear, which signals that spacers are not right for your suspension setup.
Gather the right tools and spacers before you start
You will need spacers designed for your specific vehicle — the bolt pattern, stud size, and center bore (the hole that slides over the hub) must match exactly. Bring your vehicle's year, make, model, and current wheel size to a parts supplier or check your owner's manual to confirm the correct specifications. Buying the wrong spacers will not fit and cannot be returned.
Assemble these tools before you lift the vehicle: a floor jack rated for your vehicle's weight, at least two jack stands (four is safer), a lug wrench that fits your lug nuts, a torque wrench calibrated in foot-pounds or Newton-meters, and a socket that matches your lug nuts. You will also need the torque specification for your vehicle's lug nuts — this is in your owner's manual or available from the manufacturer. Do not guess at torque; under-tightened wheels can come loose, and over-tightened lug nuts can strip or break.
Work on a flat, level surface with the engine off and the parking brake set. Wear closed-toe shoes and keep bystanders away from the work area.
Remove the wheels and inspect the hub
Loosen the lug nuts on the wheel you are working on while the vehicle is still on the ground — this is easier than loosening them after lifting. Then use the floor jack to lift the vehicle, and when ready place jack stands under the frame or suspension points rated to support the weight. Never work under a vehicle supported only by a jack.
Remove the lug nuts completely and set them in a clean container where they will not roll away. Pull the wheel straight toward you to remove it. Inspect the hub surface where the wheel mounts — it should be clean and free of rust, dirt, or old brake dust. Wipe it clean with a rag. If there is heavy rust, use a wire brush or steel wool to remove it. A dirty hub surface can cause the wheel to sit unevenly and create vibration.
Check that the hub studs are straight and undamaged. If any stud is bent or broken, do not install spacers — have the hub assembly serviced first.
Slide the spacer onto the studs and reinstall the wheel
Carefully slide the spacer onto the hub studs, aligning the bolt holes in the spacer with the studs. The spacer should slide on smoothly without forcing. If it does not fit easily, stop and check that you have the correct spacer for your vehicle — forcing a mismatched spacer can damage the studs or the spacer itself.
Once the spacer is seated against the hub, slide the wheel onto the studs, aligning the wheel's bolt holes with the spacer's bolt holes. Hand-thread the lug nuts onto the studs to hold the wheel in place, then tighten them in a star or cross pattern (opposite sides alternately) to snug them down. Do not fully tighten yet.
Lower the vehicle back onto the ground using the jack, then remove the jack and jack stands. Now use the torque wrench to tighten the lug nuts to the specification in your owner's manual, again in a star pattern. Torque is critical — it ensures the wheel is held securely without damaging the studs or spacer. Repeat this process for each wheel if you are installing spacers on all four.
Check alignment and monitor tire wear after installation
After installing spacers, your vehicle's wheel alignment may change, especially if the spacers are thick or your suspension is already modified. Schedule a wheel alignment check at a shop with a four-wheel alignment machine within a few hundred miles of installation. Misalignment will cause uneven tire wear and poor handling.
Over the first few weeks, check your lug nuts periodically — some vehicles experience slight settling after spacer installation, and lug nuts can loosen slightly. Re-torque them if needed. Inspect your tires every month for uneven wear patterns. If the inside or outside edge of the tire is wearing faster than the center, the spacers may not be compatible with your suspension geometry, and you should consult a suspension specialist.
Some vehicles with very stiff suspension or aggressive wheel offsets will experience accelerated bearing wear or steering vibration after spacer installation. If you notice new vibration, pulling to one side, or a grinding sound from the wheels, remove the spacers and have the suspension and bearings inspected.
Understand the limits of spacer installation
Spacers are not a substitute for proper suspension tuning. If your vehicle already has handling issues, spacers will not fix them — they may make them worse. Spacers also increase the load on wheel bearings and can accelerate bearing wear, especially on older vehicles or those driven on rough roads.
Some vehicle manufacturers do not recommend spacers at all, and installing them may void your warranty for suspension or wheel-related repairs. Check your warranty documentation before proceeding. Additionally, if your vehicle has electronic stability control or anti-lock brakes, spacers can affect how these systems function, particularly if the spacers change the effective wheel diameter or rolling circumference.
If you are not comfortable working with suspension components or torque specifications, have a professional mechanic install the spacers. The cost of installation is usually less than the cost of repairing damage from improper installation.
Frequently Asked Questions
Can I install spacers myself if I have never done it before?
Yes, if you have the correct tools, the right spacers for your vehicle, and your owner's manual with the lug nut torque specification. The process is straightforward, but torque accuracy is critical — under-tightened wheels can come loose while driving. If you are unsure about torque or do not have a calibrated torque wrench, have a shop do the installation.
Do spacers affect my vehicle's warranty?
Spacers are a modification and may void your manufacturer's warranty for suspension, steering, wheel, or bearing repairs. Check your warranty documentation. Some dealers will honor warranty claims even with spacers installed; others will not. Contact your dealer before installation if warranty coverage matters to you.
What happens if I use the wrong spacer thickness?
Spacers that are too thick can overload wheel bearings and suspension components, cause steering vibration, and affect brake function. Spacers that are too thin may not achieve the look or handling you want. Always confirm the correct thickness for your vehicle before purchasing.
How often should I check my lug nuts after installing spacers?
Check them after the first 50 miles, then monthly for the first few months. After that, check them during routine tire rotations or whenever you rotate your tires. Some vehicles settle slightly after spacer installation, and lug nuts can loosen as a result.
Will spacers cause my tires to wear unevenly?
Not if your wheel alignment is correct and the spacers are compatible with your suspension. If you notice uneven wear on the inside or outside edge of your tires within a few weeks of installation, have your alignment checked. Uneven wear signals that the spacers have changed your suspension geometry in a way that your vehicle's suspension cannot handle.