Find and pull the hood release lever inside your car
The hood release is almost always a lever or handle located on the driver's side of the dashboard, below the steering wheel. Look for a symbol that shows a car with its hood open — it's usually a straightforward line drawing. Pull the lever toward you with moderate force. You'll hear or feel a click as the hood latch releases.
On some newer cars, the release is a button instead of a lever. Press it once and the hood will pop open slightly. If you can't find it on the dashboard, check your owner's manual — the location varies by manufacturer, though the dashboard location is standard on nearly all vehicles made in the last 20 years.
Key Takeaways
- The hood release lever is located under the dashboard on the driver's side and is marked with a hood symbol.
- After pulling the release, you must walk to the front of the car and lift the hood the rest of the way by hand.
- Most hoods have a secondary safety latch in the center that you release by hand before the hood will fully open.
- Never force a stuck hood — spray the latch with penetrating oil and wait 15 minutes before trying again.
Walk to the front of the car and lift the hood
After pulling the release lever, the hood will pop open an inch or two but will not open all the way on its own. Walk to the front of your car and locate the gap where the hood has separated from the body. Grip the underside of the hood with both hands and lift it upward. It should rise smoothly without much resistance.
As you lift, the hood will swing up and back toward the windshield. Most hoods are designed to stay open on their own once fully raised, but some older models require you to hold them or prop them with a rod. If your hood has a prop rod, it will be attached to the underside of the hood or stored in a clip on the engine bay wall.
Release the secondary safety latch if your hood has one
Many cars have a second latch in the center of the hood, underneath where the hood meets the engine bay. This is a safety feature that prevents the hood from flying open while driving if the main latch fails. If you feel resistance when trying to lift the hood all the way, there is likely a secondary latch you need to release by hand.
Look for a small lever or tab in the center of the hood opening. Push or pull it — the direction varies by car — and you should hear a click. Then lift the hood the rest of the way. This latch is straightforward to miss, so if the hood won't open fully, check your owner's manual for its exact location on your model.
find the hood in the open position
Once the hood is fully open, it should stay up on its own if it has a gas strut — a spring-loaded rod that holds it open. Older cars use a removable prop rod instead. If your car has a prop rod, locate it (usually clipped to the inside of the hood or the engine bay wall) and insert the end into the bracket on the underside of the hood. The rod should fit snugly and hold the hood at a safe working height.
Never work under a hood that is not securely held open. If the hood falls while your head or hands are underneath, it can cause serious injury. Test that the hood is stable before you lean in to work on the engine.
Close the hood when you're finished
To close the hood, first remove the prop rod if your car uses one and return it to its storage clip. Then lower the hood by gripping the underside and pulling it down toward the engine bay. Lower it slowly — do not drop it. When the hood is about six inches from closed, release it and let it fall the rest of the way. It should latch automatically.
If the hood does not latch, pull the release lever again from inside the car and try closing it once more. Sometimes the latch needs to reset. If it still won't latch, do not force it — you may damage the latch mechanism. Check your owner's manual or contact a mechanic.
Troubleshooting a stuck hood
If the hood release lever pulls but the hood does not pop open, the latch mechanism may be stuck or corroded. Spray penetrating oil (such as WD-40 or similar products) around the latch area where the hood meets the body of the car. Let it soak for 15 minutes, then try the release lever again. Repeat if necessary.
If the hood still won't budge, do not force it. Forcing a stuck latch can bend the hood or damage the release cable. Instead, consult your owner's manual for the location of the latch and consider having a mechanic inspect it. On some cars, you can access the latch from underneath the car or from inside the engine bay to free it manually, but this requires knowing your specific model.
Frequently Asked Questions
What if the hood release lever doesn't work?
The release cable may have snapped or disconnected. Try pulling the lever several times with firm, steady pressure — sometimes the cable is just stiff. If that doesn't work, you may need a mechanic to access the latch from underneath the car or replace the cable. Do not pry the hood open with tools, as this can damage the body.
Can I open the hood if the car is running?
Yes, you can open the hood while the engine is running, but it's safer to turn the engine off first. If you must work on the engine while it's running, be extremely careful around moving belts and fans. Keep loose clothing and hair away from the engine bay.
Why does my hood have two latches?
The main latch (released from inside the car) and the secondary latch (released by hand at the front) work together as a safety system. If the main latch fails while you're driving, the secondary latch keeps the hood from flying open. This prevents a sudden loss of visibility that could cause an accident.
Is there a trick to closing the hood so it latches properly?
Lower the hood slowly and let it fall the last few inches on its own. Slamming it down hard can damage the latch or dent the hood. If it doesn't latch, pull the release lever from inside the car to reset the mechanism, then try closing it again. If it still won't latch, the latch may need adjustment or repair.