Training wheels attach to the rear axle with a bracket and bolt, and the wheels sit slightly above the ground so your child can still pedal and balance with help
Training wheels are a metal frame with two small wheels that bolt onto the rear axle of a child's bike. They sit just high enough that the bike's rear tire barely touches the ground—this matters because your child needs to feel the pedaling motion and learn balance, not sit completely supported. The wheels roll freely and keep the bike from tipping sideways while your child builds confidence and coordination.
Most training wheel kits come with everything you need: the bracket that holds both wheels, two wheel assemblies, bolts, and sometimes a wrench. The whole job takes about 15 to 20 minutes if you have the right tools. The hardest part is usually getting the bracket height right so the bike doesn't feel unstable or prevent your child from touching the ground with their toes.
Key Takeaways
- Training wheels bolt directly to the rear axle bolt, so you need to remove the rear wheel, slide the bracket on, and reinstall the wheel.
- The wheels should sit about half an inch above the ground so the bike's rear tire still carries some weight and your child learns real balance.
- Most bikes need training wheels sized for 12-inch, 14-inch, 16-inch, or 20-inch wheels—measure your child's bike wheel diameter before you buy.
- Tighten all bolts firmly but do not over-tighten, which can strip the threads on the axle or crack the bracket.
What size training wheels you need
Training wheels come in sizes that match your child's bike wheel diameter, not the child's age. Measure the distance across your bike's rear wheel from edge to edge, or check the sidewall of the tire—it will say something like "12 x 2.125" or "16 x 1.75". The first number is the wheel diameter you need.
Common sizes are 12-inch (for very small bikes), 14-inch, 16-inch, and 20-inch. Buying the wrong size means the bracket either won't fit the axle or the wheels sit too high or too low. If you are not sure, take a photo of the bike's rear wheel and the tire sidewall to the bike shop—they can tell you in seconds.
Tools and parts you will need
Most training wheel kits include the bracket, two wheels, and bolts. You will also need an adjustable wrench or the specific wrench size that fits your bike's rear axle bolt—usually 15mm or 17mm. Some kits come with a wrench; if yours does not, check your bike's manual or ask at a bike shop what size you need.
Have a clean, flat surface to work on, and keep the small bolts and washers in a cup so you do not lose them. If your bike has quick-release levers on the rear axle instead of bolts, you will need a different bracket designed for quick-release axles—check the kit description before you buy.
Step-by-step installation
Step 1: Remove the rear wheel. Flip the bike upside down so it rests on the handlebars and seat, or use a bike stand. Loosen the axle bolts on both sides of the rear wheel by turning them counterclockwise with your wrench. Once loose, unscrew them by hand and set them aside in a safe place. Slide the wheel out of the frame.
Step 2: Slide the training wheel bracket onto the axle. The bracket has a hole in the center that slides over the axle rod. Line it up so the bracket sits centered under the bike frame, then slide it on. The bracket should sit flat against the frame or dropout (the metal piece the wheel bolts into).
Step 3: Reinstall the rear wheel. Slide the wheel back into the frame so the axle rod goes through the wheel hub and the bracket. Make sure the wheel sits straight and the bracket is still centered. Hand-tighten the axle bolts on both sides, then use your wrench to tighten them firmly—they should not move or rattle, but you should not need to strain to turn the wrench.
Step 4: Attach the training wheel assemblies. The bracket has bolt holes on each side. Slide the training wheel assemblies onto the bolts (or insert the bolts through the bracket holes into the wheel assemblies, depending on your kit design). Tighten these bolts firmly so the wheels do not wobble. Spin each training wheel by hand to make sure it turns freely.
Step 5: Adjust the wheel height. Flip the bike upright and check how high the training wheels sit. The rear tire should barely touch the ground—you should be able to slide a piece of paper under it. If the training wheels are too high, loosen the bolts slightly and lower the bracket, then retighten. If they are too low, raise the bracket. This adjustment is the most important step because it determines whether your child will actually learn to balance.
Checking your work before your child rides
Spin the bike's rear wheel by hand to make sure it turns freely and does not rub against the training wheel bracket. Check that the training wheels spin freely too. Rock the bike side to side gently—the training wheels should feel solid and not wobble or shift.
Have your child sit on the bike and check that their toes touch the ground when they sit on the seat. They should be able to push themselves forward with their feet if needed. If the seat is too high, lower it before the first ride. Take the bike for a short test ride in a driveway or empty parking lot to make sure everything feels stable before your child rides on a street or path.
When to remove training wheels
Most children are ready to ride without training wheels between ages 5 and 8, but readiness depends on balance and confidence, not age. Signs your child is ready include: they can pedal smoothly without wobbling, they steer without jerking the handlebars, and they can coast without panicking. Some children need training wheels for a few weeks; others use them for months.
When you remove them, loosen and remove the training wheel bolts, slide the bracket off the axle, and reinstall the rear wheel. Keep the training wheels in case you need them again—some children regain confidence faster if they know they can go back to them temporarily.
Frequently Asked Questions
Can I use training wheels on any bike?
Training wheels fit bikes with standard bolt-on rear axles. If your bike has quick-release levers instead of bolts, you need a quick-release training wheel bracket, which is a different design. Some very small bikes or specialty bikes may not have a compatible bracket available—ask at a bike shop if you are unsure.
Why do the training wheels need to be slightly above the ground?
If the training wheels carry all the bike's weight, your child learns to lean on them instead of balancing. By keeping the rear tire slightly in contact with the ground, your child feels the pedaling motion and learns to shift their weight, which builds real balance skills. When they are ready to ride without training wheels, the transition is easier.
What if the training wheels keep rubbing the frame?
The bracket may be too wide for your bike frame, or the training wheels may be the wrong size. Check that you bought wheels sized for your bike's wheel diameter. If the bracket itself is hitting the frame, you may need a narrower bracket or a different brand—take the bike to a shop and ask them to check the fit.
Do training wheels slow down a bike?
Training wheels add a small amount of weight and rolling resistance, so the bike is slightly harder to pedal. This is normal and usually not noticeable to a child. The benefit of learning to ride safely outweighs the small difference in effort.