Where to get replacement keys and what each option costs
You have four main routes to replace a car key: the dealership, a locksmith, a big-box retailer like Home Depot or Lowe's, or an automotive key-cutting service. The dealership is the most expensive but the most reliable for newer cars with electronic fobs or security features. A locksmith or key-cutting service is usually faster and cheaper, but not all locksmiths can program modern keys. Big-box retailers can cut basic metal keys on the spot but cannot program electronic fobs.
Dealership replacement typically costs $200 to $500 per key for vehicles made after 2000, because the key must be programmed to your car's security system. A locksmith charges $50 to $200 depending on whether the key needs programming. Key-cutting services at retailers charge $5 to $25 for a straightforward metal key but cannot handle fobs or transponder keys. If you have an older car with a basic metal key, a hardware store or key-cutting service is your cheapest option. If your key has a fob or chip, you will need either a dealership or a locksmith who specializes in automotive keys.
Key Takeaways
- Dealerships charge the most but are necessary for newer cars with electronic fobs or security chips that require programming.
- Locksmiths can often replace keys faster and cheaper than dealerships, but you should confirm they can program your specific vehicle before you call.
- Hardware stores and big-box retailers can cut basic metal keys when ready but cannot program electronic fobs or transponder keys.
- You will need your vehicle identification number (VIN) and proof of ownership to order a replacement key from a dealership.
- If you are locked out of your car, a locksmith is usually faster than a dealership, which may require you to tow the vehicle.
What information you need before you call
Have your vehicle identification number (VIN) ready before you contact anyone. The VIN is a 17-character code stamped on the driver's side dashboard (visible through the windshield) and printed on your registration and insurance documents. The dealership will ask for this first because it tells them exactly which key type your car uses and what programming is required.
You will also need proof of ownership. A dealership will not cut or program a key without it, to prevent theft. Your registration, title, or insurance card will work. A locksmith may ask for the same, though some will cut a key if you can open the car and show them the VIN plate inside. Have your phone number and email ready so they can contact you when the key is done.
Dealership replacement: when you need it and how long it takes
Go to the dealership if your car is newer than 2010, has a fob with buttons, or if the key has a chip or transponder inside. These keys cannot be cut and programmed by most locksmiths or hardware stores. Call the dealership's service department, give them your VIN, and ask how much a replacement key costs and how long it will take. Many dealerships can order and program a key the same day, but some require you to bring the car in so they can program it on-site.
Bring your proof of ownership and your VIN when you go. The dealership will cut the key and program it to your vehicle's security system. This usually takes 30 minutes to an hour once you are at the service desk. If the dealership does not have the key in stock, they may need to order it, which can add a day or two. Ask about this when you call so you know whether to wait or come back later.
Locksmith replacement: faster and cheaper for most cars
A locksmith can often replace a key faster and cheaper than a dealership, but only if they have the right equipment and training for your vehicle. Call a few locksmiths in your area and tell them your car's year, make, and model. Ask specifically whether they can program keys for your vehicle. Some locksmiths specialize in automotive work and have programmers for most common cars; others only cut basic metal keys.
If a locksmith says they can do it, ask for a quote and how long it will take. Many can cut and program a key in 30 minutes to an hour. You will still need your VIN and proof of ownership. Some locksmiths will come to you if you are locked out of your car, which is faster than towing to a dealership. Check online reviews or ask your insurance company for a referral, because locksmith quality varies widely.
Hardware store and key-cutting service options
Home Depot, Lowe's, Ace Hardware, and similar retailers have key-cutting machines and can cut a basic metal key in minutes for $5 to $25. This works only if your car uses a straightforward metal key with no electronic components. If your key has a fob, buttons, or a chip inside, a hardware store cannot help you.
To use this option, bring your car key (or a photo of it) to the store. The associate will match it to a blank and cut a copy. You walk out with a new key in under 10 minutes. This is the cheapest and fastest option for older cars, but it is useless for any car made in the last 20 years that uses electronic security features. If you are not sure whether your key has a chip, look at the key itself—a transponder key usually has a plastic head with a chip visible inside, while a basic key is all metal.
What to do if you are locked out of your car
If you need a key and you are locked out, call a locksmith first. A locksmith can often unlock your car and cut a new key on the spot, which is faster than calling a dealership and arranging a tow. If you cannot reach a locksmith, call your roadside information provider (AAA, your insurance company's roadside service, or your car manufacturer's roadside program) and ask them to send a locksmith or tow truck.
Do not try to break into your own car, because you may damage the door, window, or lock mechanism and end up paying more for repairs than a locksmith would charge. If your car is very new or has a high-security system, the dealership may be your only option, and you will need to tow it. Have your proof of ownership and VIN ready before you call anyone.
Spare keys and prevention
The best time to replace a key is before you lose it. If you have a working key, get a spare made now while you have the original to copy. A hardware store can cut a spare basic key for $5 to $15. If your car has an electronic fob, ask the dealership or a locksmith to make a spare when you have the chance—it is much cheaper than replacing a key in an emergency.
Keep your spare key somewhere safe but not in your car. A locked drawer at home, a trusted friend's house, or a safe deposit box all work. Do not hide a spare key under the car, in the wheel well, or in the bumper, because thieves know to look there. If you lose your only key and have no spare, you will have no choice but to call a locksmith or dealership and pay the full replacement cost.
Frequently Asked Questions
Can a locksmith make a key if I do not have the original?
Yes. A locksmith can cut a key from your VIN or by reading the lock cylinder itself, though this takes longer and may cost more than copying an existing key. You will still need proof of ownership. Some locksmiths can do this in an hour; others may need to order a blank specific to your vehicle.
What if my key fob works but the key blade is broken?
You can usually get just the blade replaced by a locksmith or dealership for less than a full key replacement. Bring the fob and ask if they can separate the blade from the fob, cut a new blade, and reassemble it. This costs $30 to $100 depending on the fob type.
Will my car insurance cover the cost of a replacement key?
Most standard car insurance policies do not cover lost or damaged keys. Some roadside information add-ons or premium plans include key replacement coverage, so check your policy or call your agent. If you have roadside information through AAA or your car manufacturer, they may cover locksmith fees but not the key itself.
How do I know if my key has a transponder chip?
Look at the key head—if it is mostly plastic with a visible chip or circuit board inside, it is a transponder key. If it is all metal, it is a basic key. You can also try a hardware store: if they cannot cut it, it has a chip. Transponder keys are required for most cars made after 2000.
Can I program a replacement key myself?
Some cars allow you to program a spare key yourself using a specific sequence of steps (usually turning the ignition on and off in a pattern), but this works only on older vehicles and only if you already have one working key. Check your owner's manual or search your vehicle's year and model online to see if this is possible. Most modern cars require professional programming equipment.