What Lund Window Deflectors Do and Why You'd Install Them
Lund window deflectors are acrylic or polycarbonate shields that mount to the top edge of your door windows. On a Bronco Sport Big Bend, they let you crack the windows open during rain or car washes without water spraying inside. They also reduce wind noise at highway speeds and can cut down on glare from low sun angles.
The Lund brand makes deflectors specifically fitted to the Bronco Sport's window frame dimensions, so they sit flush against the glass and trim rather than looking like an aftermarket add-on. Installation is a bolt-on job that takes about 30 to 45 minutes per side and requires no drilling or permanent modification to your vehicle.
These are optional — your Bronco Sport runs fine without them — but owners often add them for comfort on long drives or if they live somewhere with frequent rain. They're also called vent shades or rain guards, and you'll see the same product under different brand names (WeatherTech, AVS, and others make similar pieces).
Key Takeaways
- Lund deflectors for the Bronco Sport Big Bend mount with adhesive tape and small bolts to the top of each door frame, taking about 30 to 45 minutes to install on both sides.
- You'll need a Phillips screwdriver, a trim removal tool or plastic pry bar, rubbing alcohol, and the hardware kit that comes with the deflectors — no drilling required.
- The hardest part is cleaning the mounting surface thoroughly and positioning the deflector straight before the adhesive sets, so take your time on that step.
- Lund deflectors are specific to the Bronco Sport body style, so confirm you're ordering the right year and model before purchase.
Tools and Materials You'll Need
Gather these items before you start. You'll need a Phillips head screwdriver (power drill optional but helpful), a plastic trim removal tool or old credit card to pry gently without scratching paint, rubbing alcohol and a clean cloth, and masking tape. The Lund deflector kit itself includes the acrylic or polycarbonate shields, pre-drilled mounting brackets, stainless steel bolts, and adhesive-backed weatherstripping tape.
If you don't have a trim tool, a plastic pry bar from an auto parts store costs a few dollars and saves your door trim from gouges. Some installers also use a heat gun to warm the adhesive tape before pressing it down, which helps it grip better, but it's not required for the Bronco Sport.
Step-by-Step Installation Process
Start with the driver's side door. Open the door fully and locate the rubber trim that runs along the top of the window frame — it sits where the deflector will mount. Use your trim tool to gently pry this trim away from the frame. It's glued on but comes off cleanly if you work slowly and don't yank. Set it aside; you'll reinstall it later.
Once the trim is off, you'll see the bare metal or plastic frame. Clean this surface thoroughly with rubbing alcohol on a cloth and let it dry completely — any dust or residue will weaken the adhesive bond. This step takes five minutes but makes a huge difference in how well the deflector stays put.
Peel back the adhesive tape on the back of the deflector bracket and press it firmly onto the cleaned frame. Line it up so the deflector sits straight and centered on the window. Hold it in place for 30 seconds to let the adhesive grab. Then reinstall the rubber trim you removed — it snaps back into place and covers the top of the bracket.
Once the adhesive has set for at least an hour (check your kit's instructions), drill the small bolt holes through the bracket into the frame using the pre-drilled holes as your guide. Use the stainless steel bolts from your kit and tighten them snugly with your Phillips screwdriver — don't over-tighten or you'll crack the acrylic. Repeat the entire process on the passenger side.
Common Installation Mistakes to Avoid
The most frequent error is skipping the cleaning step. If you mount the deflector over dust or old wax, it will loosen within weeks and rattle or shift. Spend the time with rubbing alcohol — it's the cheapest insurance against a loose install.
The second mistake is positioning the deflector crooked. Once the adhesive tape grabs, it's hard to reposition without damaging the bracket or the frame. Use masking tape to hold the deflector in the right spot for a minute before you commit the adhesive. Step back and look at it from the side to make sure it's level.
A third issue is over-tightening the bolts. The acrylic or polycarbonate can crack if you crank down too hard. Tighten until snug, then stop — you're not trying to crush the material.
Maintenance and Longevity
Lund deflectors on a Bronco Sport typically last five to seven years before the acrylic begins to cloud or the adhesive weakens, depending on sun exposure and climate. In hot, sunny regions, they may degrade faster. In cooler climates with less UV, they often last longer.
Maintenance is minimal. Wash them with the rest of your windows using regular car wash soap and water. Avoid abrasive scrubbers or harsh chemicals that can dull the acrylic. If the adhesive tape starts to fail and the deflector loosens, you can remove it and re-glue it using automotive-grade adhesive tape from an auto parts store — no need to buy a whole new kit.
Removing Lund Deflectors If You Change Your Mind
If you decide deflectors aren't for you, removal is straightforward. Pry the rubber trim away from the top of the frame again, then use your trim tool to gently work the bracket away from the adhesive tape. The tape will come off in pieces; use rubbing alcohol to dissolve any remaining residue. Clean the frame thoroughly and reinstall the rubber trim.
The process takes about 20 minutes per side and leaves no permanent marks. If you're selling the vehicle, removing the deflectors beforehand can make the Bronco Sport look cleaner and more original to potential buyers.
Frequently Asked Questions
Do Lund deflectors reduce wind noise at highway speeds?
Yes, they can reduce wind noise by 2 to 4 decibels when your windows are cracked open, though the effect is most noticeable at speeds above 60 mph. The reduction is subtle — you won't go from loud to silent — but many owners find it worth the install for long highway drives.
Will deflectors affect my Bronco Sport's resale value?
Deflectors are a neutral modification. Some buyers see them as a practical add-on; others prefer the original look. They don't hurt resale value, but they don't increase it either. If you're concerned, removing them takes 20 minutes and leaves no damage.
Can I install deflectors myself or should I take it to a shop?
Most owners install them at home in under an hour. The job requires only basic tools and no special skills. A shop will charge $100 to $200 in labor, so DIY installation saves money if you're comfortable with a screwdriver and adhesive tape.
What's the difference between Lund and other brands like WeatherTech?
Lund, WeatherTech, and AVS all make deflectors for the Bronco Sport. The main differences are material (acrylic vs. polycarbonate), finish (some are tinted, some clear), and price. All three are reliable; choose based on appearance and budget. Make sure whatever brand you pick is designed for your specific year and model.
Do deflectors work if I have a sunroof?
Deflectors are designed for the side windows only, so a sunroof doesn't affect their function. They work independently of the sunroof and won't interfere with opening or closing it.