What a Kubota track loader is and why it matters

A Kubota track loader is a compact earthmoving machine built on a steel track system instead of wheels, designed to move soil, gravel, mulch, and other materials across uneven or soft ground without sinking or leaving deep ruts. The tracks distribute the machine's weight over a larger surface area than wheels would, which is why you see them on construction sites, landscaping jobs, and farms where the ground is wet, muddy, or sloped. Kubota, a Japanese manufacturer, makes several track loader models ranging from about 1,500 pounds to over 5,000 pounds, each with a bucket or attachment point at the front for loading and moving material.

Understanding how a track loader works—and what maintenance keeps it running—matters because these machines cost between $25,000 and $60,000 new, and repairs can be expensive if you ignore early warning signs. The tracks themselves wear out, hydraulic fluid leaks, and engines need regular service just like any other machine. Owners who understand the basic systems can spot problems early and avoid downtime during a job.

Key Takeaways

  • Kubota track loaders use steel or rubber tracks instead of wheels to spread weight and grip soft or uneven ground without sinking.
  • The engine, hydraulic system, and track drive are the three main systems that need regular inspection and maintenance to prevent costly repairs.
  • Track tension must be checked and adjusted regularly because loose tracks slip and wear faster, while over-tight tracks strain the drive system.
  • Hydraulic fluid should be changed on the schedule in your owner's manual because dirty fluid damages pumps and cylinders, which are expensive to replace.
  • Daily walk-around checks for leaks, cracks, and debris caught in the tracks take five minutes and catch problems before they strand you on a job.

How the track drive system works

The tracks on a Kubota loader are powered by a hydraulic motor connected to each side of the machine. When you move the control lever, hydraulic fluid flows to the motor, which turns a final drive gear that meshes with a sprocket wheel. That sprocket pulls the track around, moving the machine forward or backward. Each track can be controlled independently, which is why you can turn the loader in a tight circle or even spin it in place—something a wheeled loader cannot do as sharply.

The track itself is made of steel or rubber links held together by pins and bushings. Steel tracks grip better on hard ground and last longer on rough surfaces, but they are louder and can damage asphalt. Rubber tracks are quieter and easier on paved surfaces, but they wear faster on sharp rocks and cost more to replace. Both types need tension adjustment because a loose track will slip off the sprocket or wear unevenly, and an over-tight track puts strain on the drive motor and final drive, which can fail suddenly.

The idler wheel at the rear of each track keeps tension on the track and can be adjusted by loosening bolts and moving the idler forward or backward. Most owners check track tension monthly by pushing on the track midway between the sprocket and idler—it should move about half an inch. If it moves more, the track is too loose; if it does not move at all, it is too tight. Your owner's manual will show the exact procedure for your model.

Engine and fuel system maintenance

Kubota track loaders use diesel engines ranging from 20 to 50 horsepower depending on the model. Diesel engines are common on heavy equipment because they produce high torque at low RPM, which is what you need to move heavy loads. The engine sits in an enclosed compartment and draws air through a filter, so the first maintenance task is checking and replacing the air filter regularly—a clogged filter reduces power and increases fuel consumption.

Diesel fuel can collect water and sediment over time, especially if the machine sits for weeks between jobs. That contamination clogs the fuel filter and injectors, which causes hard starting and rough running. Change the fuel filter on the schedule in your manual, usually every 500 hours of operation. If the machine has been sitting, drain the fuel tank and refill it with fresh fuel before starting it up. Kubota also recommends using fuel with a cetane rating of at least 45 to may support proper combustion and reduce engine wear.

Oil changes are just as important on a track loader as on any vehicle. The engine oil lubricates the pistons, bearings, and valve train, and it breaks down over time from heat and contamination. Change the oil and oil filter every 250 to 500 hours depending on your model and operating conditions—more often if you work in dusty conditions. Use the grade specified in your manual; most Kubota loaders use 15W-40 or 10W-30 diesel oil. Skipping oil changes leads to bearing wear, sludge buildup, and eventual engine failure.

Hydraulic system care and fluid replacement

The hydraulic system is the nervous system of a track loader—it powers the tracks, the bucket, and any attachments. Hydraulic fluid flows through pumps, motors, cylinders, and control valves at high pressure, and any contamination or breakdown of the fluid reduces efficiency and damages components. The pump can cost $2,000 to $4,000 to replace, so protecting the hydraulic system is one of the best investments you can make in machine longevity.

Check the hydraulic fluid level weekly using the sight glass or dipstick on the reservoir. The fluid should be between the minimum and maximum marks when the engine is cold and level. Low fluid means a leak somewhere—check under the machine and around all hoses and cylinders for drips. A small leak can become a big problem quickly because the pump will cavitate (draw air) if the level drops too far, which damages the pump and causes loss of power. Top up with the exact fluid type specified in your manual; mixing different hydraulic fluids can cause seal failure.

Hydraulic fluid should be changed every 1,000 to 2,000 hours of operation or annually, whichever comes first. Dirty fluid is darker and may smell burnt, which means the additives have broken down and the fluid is no longer protecting the system. Changing the fluid is a messy job—you will need a drain pan, new fluid, and a way to dispose of the old fluid properly—but it is far cheaper than replacing a pump or motor. Some owners take their loaders to a Kubota dealer for this service, which costs $300 to $600 but ensures the job is done correctly.

Track wear, replacement, and inspection

Tracks wear out faster than most owners expect because they are in constant contact with the ground and absorb all the stress of moving the machine and its load. The links, pins, and bushings gradually wear, and the track becomes loose and sluggish. You will notice the machine does not move as quickly, or it pulls to one side because one track is more worn than the other. At that point, replacement is usually cheaper than trying to repair individual links.

A new set of tracks costs $3,000 to $8,000 depending on the model and whether you choose steel or rubber. Replacement takes a few hours if you have a lift or a way to support the machine safely. Many owners take their loaders to a dealer for track replacement because it requires special tools and knowledge of proper tension adjustment. If you do it yourself, make sure the machine is on level ground, use jack stands rated for the weight, and never work under the machine supported only by a jack.

Inspect the tracks monthly for cracks, bent links, and missing or broken pins. A cracked link will eventually break and jam the track, leaving you stranded. Bent links cause the track to bind and wear unevenly. Missing pins or bushings allow the links to move side to side, which causes the track to slip off. If you catch these problems early, you can replace individual links before the whole track fails. Keep a spare link and pin kit on hand if you use the loader regularly.

Cooling system and belt maintenance

The engine cooling system keeps the diesel engine from overheating, especially during heavy work in warm weather. The radiator sits at the front of the machine and draws air through cooling fins. Dirt, dust, and debris accumulate on the fins and block airflow, which causes the engine to run hot. Check the radiator monthly and blow out the fins with compressed air if they are clogged. A clogged radiator can cause the engine to overheat and shut down, stopping your work.

The coolant itself should be inspected regularly. It should be bright green or orange depending on the type, and it should not be rusty or cloudy. If the coolant looks discolored, drain and refill the system with the correct coolant type for your model. Most Kubota loaders use a long-life coolant that lasts two to three years or 2,000 hours. Mixing different coolant types can cause corrosion inside the engine, so stick with what the manual specifies.

The serpentine belt or fan belt drives the water pump and alternator. If it is cracked, frayed, or slipping, the water pump will not circulate coolant and the alternator will not charge the battery. Check the belt tension by pressing on it midway between pulleys—it should deflect about half an inch. If it is loose, tighten it by adjusting the alternator bracket. If it is cracked or frayed, replace it. A new belt costs $50 to $150 and takes 30 minutes to install, but a broken belt can leave you without cooling or electrical power.

Seasonal storage and winterization

If you store your Kubota loader for the winter or during the off-season, a few steps will keep it ready to start when you need it again. Drain the fuel tank or add a fuel stabilizer to prevent gum and varnish buildup in the injectors. Change the oil and filter before storage so the fresh oil protects the engine during the idle period. Top up the coolant and check that it is the correct freeze-protection rating for your climate.

Grease all the grease fittings on the track idlers, sprockets, and pivot points. These fittings are usually marked with a small nipple where you attach a grease gun. Greasing them prevents rust and keeps the joints moving freely. If you cannot find the grease fittings, check your owner's manual for a lubrication diagram. Disconnect the battery or connect it to a trickle charger to keep it from discharging during storage. Cover the machine with a tarp to keep rain and snow off the engine and hydraulic components.

Common problems and what causes them

Track slippage is one of the most common complaints from Kubota loader owners. The machine moves slowly or pulls to one side, and the tracks spin without gripping. This usually means the tracks are too loose or one track is more worn than the other. Check the tension on both sides and adjust the idler wheels. If both tracks are equally loose, tighten them. If one track is worn and the other is not, you may need to replace the worn track sooner than expected.

Loss of hydraulic power—the bucket does not lift or the machine does not move—usually points to low fluid level or a clogged filter. Check the fluid level first and look for leaks. If the level is low, find and repair the leak before operating the machine. If the level is normal, change the hydraulic filter. A clogged filter restricts flow and causes the pump to work harder, which generates heat and can damage the pump.

Hard starting or rough running in cold weather is common with diesel engines. Make sure you are using the correct fuel grade for your climate—diesel fuel gels in cold weather if it does not have enough additives. Use winter-grade diesel or add a fuel additive in cold months. If the machine still does not start, the fuel filter may be clogged with wax crystals. Change the fuel filter and try again. If it still does not start, the glow plugs may be failing, which requires a dealer visit.

Frequently Asked Questions

How often should I grease a Kubota track loader?

Grease all fittings every 50 hours of operation or monthly, whichever comes first. If you work in wet or dusty conditions, grease more often. Use a grease gun and pump until you see fresh grease coming out of the joint, which means the old grease and dirt have been pushed out.

Can I use regular motor oil in a Kubota diesel engine?

No. Diesel engines require diesel-rated oil because it has different detergents and viscosity than gasoline engine oil. Using the wrong oil will void your warranty and can damage the engine. Always use the grade specified in your owner's manual.

What should I do if hydraulic fluid is leaking from a hose?

Stop operating the machine when ready and locate the leak. If it is a loose fitting, tighten it with a wrench. If the hose itself is cracked or punctured, it must be replaced. Do not attempt to patch a hydraulic hose with tape—the high pressure will blow the patch off. Take the machine to a dealer or hydraulic shop for hose replacement.

How do I know when my tracks need to be replaced?

Tracks usually last 1,500 to 2,500 hours depending on the terrain and how hard you work the machine. Signs of wear include visible cracks in the links, bent or missing pins, loose or rattling tracks, and uneven movement. If the machine pulls to one side or moves slowly even after you tighten the tracks, replacement is likely needed.

Is it safe to work on a Kubota loader myself?

straightforward tasks like checking fluid levels, changing filters, and greasing fittings are safe if you follow the manual and use proper tools. Never work under the machine without jack stands rated for its weight. For complex repairs like track replacement, hydraulic work, or engine service, take it to a Kubota dealer where technicians have the right tools and training.