MDS Delete removes or disables your engine's Multi-Displacement System to stop it from shutting down cylinders
MDS (Multi-Displacement System) is a fuel-saving feature on many Chrysler, Dodge, and Jeep vehicles that deactivates half of your engine's cylinders when you're cruising at steady speeds. An MDS delete is a modification that removes this system entirely or permanently disables it so your engine always runs on all cylinders. The result is slightly worse fuel economy but smoother power delivery and, according to owners who've done it, fewer rough idle issues and transmission problems.
Whether an MDS delete makes sense depends on what bothers you about how your vehicle runs right now. If your truck idles roughly, hesitates during acceleration, or you've had transmission issues that a mechanic traced back to MDS cycling, a delete might solve those problems. If your fuel economy is fine and the engine runs smoothly, there's no practical reason to do it.
Key Takeaways
- MDS delete disables the cylinder deactivation feature, forcing your engine to run on all cylinders at all times instead of switching between full and half power.
- The trade-off is a fuel economy loss of roughly 1 to 3 miles per gallon, depending on how much highway driving you do.
- Shops typically recommend MDS delete when rough idle, hesitation, or transmission shudder is caused by the system cycling on and off.
- An MDS delete requires either a tuner reprogramming your engine computer or mechanical removal of the solenoids that control the system, costing between $300 and $800 depending on method.
- Disabling MDS does not void your warranty outright, but any engine or transmission problem that occurs after the delete may be harder to get covered if the dealer suspects the modification caused it.
How MDS actually works and why it causes problems
On V8 engines equipped with MDS—common on Dodge Ram trucks, Jeep Grand Cherokees, and Chrysler 300s—the system uses solenoids to deactivate the intake and exhaust valves on four cylinders (usually cylinders 1, 4, 6, and 7) when the engine computer detects steady cruising. The four active cylinders keep the engine running while fuel consumption drops. When you accelerate or need more power, all eight cylinders come back online when ready.
The problem is that the transition between four and eight cylinders isn't always smooth. Some owners report a noticeable shudder or hesitation when MDS engages or disengages, especially during light acceleration or when maintaining a constant speed on the highway. Others describe a rough idle that gets worse over time as the solenoids wear. In some cases, the transmission struggles to shift smoothly because the engine's power delivery is inconsistent as MDS cycles.
These issues are more common on higher-mileage vehicles and on trucks that tow or carry heavy loads regularly. MDS was designed for steady highway cruising in light conditions, not for the variable demands of towing or city driving where the system is constantly switching on and off.
The fuel economy cost of disabling MDS
Removing MDS will reduce your fuel economy because your engine is always burning fuel for eight cylinders instead of four during highway cruising. How much you lose depends on your driving pattern. If you spend most of your time on the highway at steady speeds, you'll see a bigger drop—typically 2 to 3 miles per gallon. If you drive mostly in the city with frequent acceleration and braking, the loss may be only 1 mile per gallon or less, since MDS doesn't engage much in stop-and-go traffic anyway.
For a truck that gets 18 mpg on the highway, an MDS delete might drop that to 15 or 16 mpg. Over a year of highway driving, that's a noticeable fuel cost increase. Calculate your own cost by estimating how many highway miles you drive annually, dividing by your current mpg, then dividing by your expected mpg after the delete. Multiply the difference in gallons by your local fuel price.
Two methods: tuning versus mechanical removal
The most common approach is tuning, where a shop uses a handheld tuner or connects to your vehicle's engine computer and reprograms it to disable MDS. This is non-invasive—no parts are removed—and takes an hour or two. The tuner straightforward tells the computer to ignore the MDS solenoids and always run all eight cylinders. Cost is typically $300 to $500 depending on the shop and whether they're using their own tuner or a third-party software like Diablo or SCT.
The alternative is mechanical removal, where a technician physically removes or disconnects the MDS solenoids from the engine. This is more involved—it requires removing valve covers and disconnecting electrical connectors—but it's permanent and doesn't rely on software. Mechanical removal costs $500 to $800 and takes several hours. Some owners prefer it because there's no computer file to worry about, but tuning is faster and reversible if you change your mind.
Warranty and dealer service after an MDS delete
Disabling MDS does not automatically void your entire warranty. However, Chrysler and Dodge dealers can refuse to cover engine or transmission problems if they determine that the delete caused or contributed to the failure. For example, if your transmission fails six months after an MDS delete, the dealer may argue that the change in engine behavior caused the transmission to wear faster, and they may deny the claim.
In practice, dealers vary in how strictly they enforce this. Some will service your vehicle normally and only question the delete if a specific problem arises. Others will note the modification in your service record and be more skeptical of warranty claims going forward. If you plan to keep the vehicle under warranty and want dealer service, ask the shop doing the delete whether they can document it in a way that doesn't trigger dealer flags, or consider waiting until the warranty expires.
If you're paying out of pocket for repairs anyway, an MDS delete is a lower-risk choice because you're not relying on dealer coverage.
When an MDS delete actually solves a problem
An MDS delete is most effective when you're experiencing specific symptoms that you've confirmed are caused by MDS cycling. If your truck idles roughly and a mechanic has ruled out spark plugs, fuel injectors, and vacuum leaks, MDS may be the culprit. If you feel a shudder or hesitation during light acceleration on the highway, and it happens consistently at the same speeds where MDS typically engages, a delete will likely fix it. If your transmission shudders when shifting and the dealer has found no transmission fluid leaks or solenoid faults, MDS cycling may be the underlying cause.
In these cases, owners report that the delete when ready resolves the issue. The engine runs smoother, idle is cleaner, and acceleration feels more linear. The fuel economy trade-off is worth it to them because the vehicle now drives the way they expect it to.
If your vehicle runs smoothly and you're just curious about MDS or want slightly more power, a delete is less necessary. You'll pay $300 to $800 and lose 1 to 3 mpg for a benefit you may not notice in daily driving.
Alternatives if you want to keep MDS but reduce problems
If you're hesitant about a full delete, a few other options exist. Some tuners offer a MDS tune that adjusts when and how often MDS engages rather than disabling it completely. For example, a tune might prevent MDS from activating below 50 mph or only when the engine is fully warmed up. This keeps some of the fuel economy benefit while reducing the cycling that causes rough idle or hesitation. Cost is similar to a full delete tune, around $300 to $500.
Another option is to have a mechanic clean the MDS solenoids if they're clogged with carbon buildup. Dirty solenoids can cause the same rough idle and hesitation symptoms. A cleaning costs $200 to $400 and may resolve the problem without removing the system. However, if the solenoids are worn out rather than dirty, cleaning won't help permanently.
Frequently Asked Questions
Will an MDS delete hurt my engine?
No. Running all eight cylinders all the time is not harmful to the engine. In fact, it may reduce wear on the solenoids themselves since they're no longer cycling. The only downside is higher fuel consumption and slightly higher engine temperature under sustained load, but modern engines are designed to handle this.
Can I reverse an MDS delete if I change my mind?
If you had a tuner delete, yes—the shop can reflash your computer back to the original tune. If you had mechanical removal of the solenoids, reversal is possible but more expensive because the solenoids may need to be replaced and reconnected. Keep your original tune file if you go the tuner route.
Do I need an MDS delete if I tow?
Not necessarily. MDS disengages automatically when you're towing because the engine computer detects the load and keeps all cylinders active. However, if you experience rough idle or hesitation when not towing, a delete can still help with those issues.
What's the difference between an MDS delete and a performance tune?
An MDS delete only disables the cylinder deactivation system. A performance tune adjusts multiple engine parameters—fuel timing, boost pressure, shift points—to increase horsepower and torque. You can do an MDS delete alone, or combine it with a performance tune for more aggressive changes.
Will a dealer know I had an MDS delete?
If you had a tuner delete, the dealer can read your engine computer and see that the tune has been modified, though they may not know exactly what was changed without detailed analysis. If you had mechanical removal, they would only know if they physically inspect the solenoids or if you tell them. Mechanical deletes are harder for dealers to detect.