What the MDT Send It Gen 2 does

The MDT Send It Gen 2 is a dash cam designed to record video from your vehicle's windshield while you drive. It captures front-facing footage in high definition, stores it on a memory card, and can be reviewed later on a computer or phone. Unlike some dash cams, it does not require a subscription service to function — the camera records continuously once you power it on, and you own the footage it creates.

The Gen 2 is the second version of MDT's Send It line. It improved on the original model with better video quality, faster processing, and a more compact design. If you already own the first-generation Send It, the Gen 2 offers a noticeable step up in image clarity, especially in low light or at night.

This camera is built for people who want straightforward dash cam recording without monthly fees or cloud storage requirements. You buy the hardware once, insert a memory card, and it begins recording when ready. The footage stays on your card until you delete it or the card fills up and overwrites the oldest files.

Key Takeaways

  • The MDT Send It Gen 2 records continuous video to a memory card without requiring a subscription or internet connection.
  • You will need to purchase a compatible microSD card separately, as the camera does not come with one included.
  • The camera mounts to your windshield with an adhesive bracket and connects to power through your vehicle's 12-volt outlet or hardwired to your fuse box.
  • Video files loop automatically when the memory card is full, so older footage is overwritten unless you manually back it up.
  • The Gen 2 records in 1440p resolution at 30 frames per second, which is sharper than 1080p but uses more storage space.

Memory card requirements and storage

The MDT Send It Gen 2 requires a microSD card rated for high-speed video recording. MDT recommends cards with a V30 speed class rating or higher, which means the card can write data at a minimum of 30 megabytes per second. Cards that are too slow will cause the camera to drop frames or fail to record properly.

Storage capacity determines how long the camera can record before looping over old footage. A 128 GB card typically holds 10 to 12 hours of 1440p video, depending on the exact bitrate and compression. A 256 GB card roughly doubles that. If you drive daily and want to keep a week's worth of footage, a 256 GB card is a practical choice. Larger cards (512 GB or 1 TB) are available but cost significantly more and may not be necessary unless you rarely delete footage.

You can purchase a compatible card from any electronics retailer. Popular options include SanDisk Extreme, Kingston Canvas Go, and Samsung Pro Endurance. Check the product listing to confirm the V30 rating before buying. The camera itself costs less than the memory card in many cases, so budget for both when purchasing.

Installation and power options

The MDT Send It Gen 2 mounts to your windshield using a 3M adhesive bracket that comes in the box. Clean the windshield with rubbing alcohol and let it dry completely before explore the bracket — a dirty surface will cause the mount to fail or fall off. Press the bracket firmly for 30 seconds and wait at least an hour before mounting the camera to allow the adhesive to set.

For power, you have two main options. The simplest is to plug the USB cable into a 12-volt car outlet (the cigarette lighter socket) and route the cable along the headliner and down the side of the windshield. This method requires no tools and takes five minutes, but the cable is visible and the outlet is occupied.

The more permanent option is to hardwire the camera to your vehicle's fuse box. This hides the cable inside your vehicle's interior panels and frees up the 12-volt outlet. Hardwiring requires basic electrical knowledge and a fuse tap or hardwire kit designed for dash cams. If you are not comfortable working with your fuse box, a car audio shop can do this installation for $50 to $150. The camera will then power on and off automatically with your vehicle.

Video quality and night recording

The Gen 2 records at 1440p resolution (2560 × 1440 pixels) at 30 frames per second. This is sharper than standard 1080p dash cams and makes it easier to read license plates in daylight footage. The trade-off is that 1440p files are larger and consume memory card space faster than 1080p would.

Night recording is where the Gen 2 shows a meaningful improvement over the original Send It. The camera uses a larger sensor and improved low-light processing to capture clearer video in darkness or heavy shadow. Street lights and oncoming headlights are visible without washing out the image. However, no dash cam performs perfectly in complete darkness — if you drive on unlit roads at night, expect less detail than you would see in daylight.

The camera has a fixed lens with a 140-degree field of view. This angle captures most of what is directly ahead and slightly to the sides, but it does not record what is behind you or to the rear sides of your vehicle. If you need rear coverage, you would need to purchase a separate rear camera and hardwire both units.

Playback and file management

Video files are stored as MP4 files on the microSD card. You can remove the card from the camera and insert it into a computer or card reader to view footage on any device that plays MP4 video. Most modern computers, phones, and tablets can open these files without installing special software.

The camera itself has a small built-in screen that shows a live preview while driving and allows you to review recent footage without removing the card. The screen is useful for checking that the camera is recording and for quick playback, but it is small and not ideal for detailed review. For serious review of an incident, transferring files to a computer monitor is more practical.

When the memory card fills up, the camera automatically deletes the oldest files and continues recording new ones. This loop recording means you do not have to manually manage the card, but it also means old footage is lost unless you back it up first. If you are involved in an accident or incident, save the relevant video file to a computer or cloud storage when ready so it is not overwritten.

Common issues and troubleshooting

The most frequent problem is a memory card that is too slow or incompatible. If the camera fails to record or shows a card error, check that your card has a V30 speed rating and is on MDT's list of tested cards. Formatting the card in the camera itself (not on a computer) often resolves read or write errors.

If the camera stops recording while driving, the most likely cause is a power connection issue. Check that the USB cable is fully inserted into both the camera and the power source. If you are using a 12-volt outlet, confirm that the outlet is powered — some vehicles have outlets that only work when the ignition is on. If you hardwired the camera, verify that the fuse tap is seated correctly in the fuse box.

Adhesive bracket failure is rare but can happen if the windshield was not clean before installation or if the bracket was not pressed firmly enough. If the camera falls, reapply the bracket using a new 3M adhesive pad (sold separately) rather than trying to reuse the old one.

The camera can overheat in very hot vehicles, especially if parked in direct sun. This is normal and the camera will resume recording once it cools. Parking in shade or using a sunshade reduces the risk. If overheating happens frequently, check that the camera's ventilation holes are not blocked by dust or debris.

Comparing the Gen 2 to other dash cams

The MDT Send It Gen 2 sits in the mid-range of the dash cam market. It costs less than premium brands like Viofo or Thinkware but more than budget models from lesser-known manufacturers. The main advantage is the 1440p resolution and strong night recording without a subscription fee.

If you want a dash cam with built-in GPS, cloud backup, or a larger touchscreen, you will need to spend more or choose a different brand. The Gen 2 is stripped down intentionally — it records video and stores it locally, nothing more. Some people prefer this simplicity; others want more features.

For drivers who mainly want evidence of what happened in front of their vehicle and do not want to pay monthly fees, the Gen 2 is a solid choice. For drivers who want a camera that also tracks location, uploads to the cloud, or sends alerts to a phone, a different model may be a better fit.

Frequently Asked Questions

Do I need to subscribe to a service to use the MDT Send It Gen 2?

No. The camera records to a memory card and stores all footage locally. There is no monthly fee, cloud storage requirement, or app subscription. You own the footage and can review it anytime by removing the card or using the built-in screen.

Can the Gen 2 record while parked?

The Gen 2 does not have a parking mode or motion detection feature. It only records when the camera is powered on. If you want to record while parked, you would need to leave the vehicle running or hardwire the camera to a battery that stays powered when the engine is off — though this drains your vehicle's battery over time.

What happens if my memory card is full?

The camera automatically overwrites the oldest footage with new recordings. If you want to keep a specific video (such as footage of an accident), save it to a computer or phone before the card loops over and deletes it.

Is the MDT Send It Gen 2 waterproof?

The camera itself is not waterproof, but it mounts inside your vehicle on the windshield, so it does not get wet. The USB cable and power connections should be kept dry. If water gets into the USB port, the camera may not power on until it dries completely.

Can I use the Gen 2 with a phone or tablet?

The camera does not connect to a phone app. You can view footage by removing the memory card and inserting it into a phone or tablet with a card reader, or by transferring files via a computer. The built-in screen on the camera is the only way to review video directly from the device.