What mid-engine tube chassis plans actually include
Mid-engine tube chassis open-wheel plans are detailed drawings and specifications for building a single-seat race car from the ground up. These plans show you how to weld a steel tube frame, position the engine behind the driver, and integrate suspension, steering, and brake systems. The plans come as PDF files, CAD files, or printed documents — sometimes all three — and range from basic sketches to fully dimensioned blueprints with material lists.
What you get depends on the plan source. Some plans include only the chassis frame geometry and leave engine mounting, fuel system, and electrical work to your judgment. Others are more complete, with detailed drawings for suspension arms, brake ducting, and cockpit layout. A few include full-scale templates you can print and use to mark tube lengths directly. None of them include the engine, transmission, or other components — you source those separately.
These plans exist because mid-engine tube chassis cars are popular in amateur racing series like Formula SAE, club-level road racing, and vintage open-wheel events. Building from plans is cheaper than buying a finished car and teaches you how the machine actually works.
Key Takeaways
- Plans show frame geometry, suspension pickup points, and basic system layouts, but you must source the engine, transmission, and most other components yourself.
- Complete plans cost between $200 and $1,500 depending on detail level and whether they include CAD files, templates, or material specifications.
- You need a welding setup (MIG or TIG), a drill press, a way to measure and cut tubing, and access to a lift or jack stands for assembly and testing.
- Building from plans typically takes 300 to 800 hours of work depending on your experience and how much fabrication you do yourself versus outsourcing.
- Before you start, confirm the plans match your intended racing series or use case, because different series have different rules about frame dimensions, driver position, and safety equipment.
Where to find and buy plans
Plans come from a few reliable sources. Formula SAE teams often publish their designs online or sell them to fund the next season — search "Formula SAE chassis plans" plus your preferred engine type (Kawasaki, Honda, Subaru). Vintage racing organizations like the SCCA publish historical designs for cars that raced in the 1960s and 1970s. Independent designers sell plans through their own websites or through platforms like Gumroad or Etsy, though quality varies widely.
Established sources include companies that specialize in kit cars and race car plans. Some publish free basic sketches to show you what you're buying, then charge $300 to $800 for the complete dimensioned drawings. Others bundle plans with material lists, welding guides, and assembly videos for $1,000 to $1,500. A few offer ongoing email support or access to a builder community.
Before you buy, ask the seller whether the plans have been built successfully by others, whether they include CAD files you can modify, and what the return policy is if the plans are incomplete or unclear. Plans that have been built multiple times are less likely to contain errors.
Tools and equipment you need to build
You cannot build a tube chassis without a welding setup. A MIG welder (wire-feed) is the most forgiving for beginners and costs $300 to $800 new. A TIG welder (tungsten inert gas) produces stronger welds and is preferred by experienced builders, but costs $800 to $2,000 and has a steeper learning curve. If you do not own one, many makerspaces, community colleges, and welding shops rent time by the hour for $15 to $40.
Beyond welding, you need a way to measure and cut tubing accurately. A tube notcher (manual or powered) costs $100 to $500 and cuts the angled joints where tubes meet. A bandsaw or cutoff saw handles straight cuts. A drill press is essential for suspension mounting holes and costs $200 to $600 used. A jack and jack stands or a lift lets you work under the car safely — never rely on a jack alone.
You also need basic hand tools: wrenches, sockets, screwdrivers, a tape measure, a square, and calipers for checking dimensions. A digital scale helps you track weight distribution. If you plan to do your own suspension geometry work, a camber gauge and alignment tools cost $50 to $200, though many builders take the finished car to a shop for alignment.
How to read and interpret the plans
Plans use standard engineering drawings: top view, side view, front view, and isometric (3D) sketches. Dimensions are given in inches or millimeters — check which one the plans use before you start cutting. Tube sizes are listed as diameter and wall thickness (for example, 1.5" x 0.095" means 1.5 inches outside diameter with 0.095-inch wall). Suspension pickup points are marked as coordinates so you can measure from a reference point (usually the center of the frame) to locate each hole.
If the plans come with CAD files, you can open them in free software like Fusion 360 or LibreCAD to zoom in, measure distances, and print full-scale sections. If they are PDF only, print the pages at 100% scale (not "fit to page") and tape them together to create a full-size template. Lay the template on your tubing and mark the cut lines with a marker or soapstone.
Pay close attention to notes about tube bending, welding sequence, and stress points. Some plans specify which welds must be done first to avoid distortion. Others note which joints need reinforcement plates or gussets. If a note is unclear, contact the plan seller or post photos in a builder forum — experienced builders can usually spot the intent.
Sourcing the engine and drivetrain
The engine choice depends on your budget, the racing series you are entering, and the plans themselves. Many plans are designed around specific engines: Kawasaki Ninja motorcycle engines (600cc to 1000cc) are popular for lightweight cars, Honda K-series engines fit well in mid-engine layouts, and Subaru flat-fours are common in Formula SAE. Check whether your plans specify an engine or allow flexibility.
Used motorcycle engines cost $300 to $800 and are lighter than car engines, but require custom exhaust and cooling work. Used car engines from junkyards cost $200 to $500 but are heavier. New crate engines cost $1,500 to $4,000. The transmission must match the engine — motorcycle engines often use motorcycle transmissions (which are lighter), while car engines need car transmissions or custom adapters.
You also need engine mounts that bolt the engine to the frame. Some plans include mount designs; others require you to fabricate them. Mounts must be rigid enough to prevent engine movement but isolated enough to reduce vibration. Many builders use rubber-bushed mounts or adjustable mounts to dial in the geometry after the car is assembled.
Suspension, steering, and brake system layout
The plans show where suspension arms attach to the frame and where the wheels mount. Most mid-engine open-wheel cars use double-A-arm (double-wishbone) suspension because it allows independent wheel control and is relatively straightforward to fabricate. The plans specify arm lengths, pivot angles, and ride height, which determine how the car handles.
Steering is usually a rack-and-pinion system mounted low in the chassis, with a shaft running forward to the steering wheel. Plans show the steering column angle and the tie-rod routing. You can buy a used rack from a junked car (often $50 to $150) or a new one from a supplier ($300 to $600). The steering wheel itself is a small racing wheel, typically 11 to 13 inches in diameter, costing $100 to $300.
Brakes are usually a hydraulic system with calipers at all four wheels. Plans show the brake line routing and caliper mounting points. You can use calipers from a donor car or buy new racing calipers ($200 to $500 per corner). A master cylinder, brake lines, and a proportioning valve complete the system. Many builders use a straightforward two-circuit setup with a bias adjuster to fine-tune brake balance.
Common mistakes builders make
The most common mistake is not checking the plans against your racing series' rulebook before you start. Different series have different rules about frame dimensions, driver position, fuel cell location, and safety equipment. Building a car that violates the rules means starting over or major modifications. Contact the series technical inspector or read the rulebook before cutting the first tube.
The second mistake is underestimating weight. A mid-engine tube chassis car should weigh 900 to 1,400 pounds depending on the engine and components. Many first-time builders add extra bracing "just in case," which adds weight without improving strength. Use the plans as written, then add reinforcement only where testing shows it is needed.
The third mistake is poor welding. Tube chassis cars are only as strong as their welds. If you are new to welding, practice on scrap tubing first, take a welding class, or have an experienced welder check your work before you assemble the full frame. A cracked weld in a corner of the frame can cause catastrophic failure at speed.
The fourth mistake is not accounting for cooling and airflow. Mid-engine cars need air to reach the radiator and oil cooler, and hot air must exit the engine bay. Plans sometimes show cooling ducting; if yours do not, research how similar cars handle it. Poor cooling leads to overheating and engine damage during a race.
Frequently Asked Questions
Can I modify the plans to use a different engine?
Yes, but it requires engineering work. You must verify that the engine fits the frame dimensions, that the weight distribution is acceptable, and that the engine mounts and cooling system work with the new engine. If the plans were designed for a 600cc motorcycle engine and you want to use a 2-liter car engine, you are essentially designing a new car. Start with plans that match your intended engine.
How much does it cost to build a complete car from plans?
A complete mid-engine tube chassis car typically costs $8,000 to $20,000 in parts and materials, not counting your labor. The frame and welding supplies cost $1,000 to $2,000. The engine and transmission cost $500 to $4,000. Suspension, brakes, steering, and fuel system cost $2,000 to $5,000. Wheels, tires, and safety equipment cost $2,000 to $4,000. If you outsource welding or fabrication, costs rise significantly.
Do I need a machine shop to build from plans?
Not necessarily, but access to one helps. You can cut and notch tubing by hand with a hacksaw and file, but a tube notcher and bandsaw save hours of work. A drill press is nearly essential for accurate hole placement. Many community makerspaces and vocational schools offer access to these tools for a membership fee or hourly rate.
What if I make a mistake while welding or cutting?
Small mistakes can be corrected. A misaligned hole can be drilled larger and fitted with a spacer or bushing. A poorly welded joint can be cut out and rewelded if the damage is not too deep. A tube cut slightly short can be extended with a sleeve. Keep the plan seller's contact information in case you need clarification on how to fix something.
Can I use these plans to build a street-legal car?
Not without significant additional work. Mid-engine open-wheel cars are designed for racing and lack features required for street use: doors, windows, lights, mirrors, a windshield, and emissions equipment. Some jurisdictions allow kit cars or race cars to be registered, but requirements vary widely. Check your local DMV before you start if street use is your goal.