The new Hemi badge marks Dodge's switch from a traditional V8 to a smaller turbocharged engine with the same displacement

Dodge reintroduced the Hemi badge in 2024 on the Charger and Challenger, but the engine underneath is not the legendary 5.7-liter V8 that made the name famous. The new Hemi is a 3.0-liter turbocharged inline-six that produces similar horsepower to the old V8 but works very differently. This shift happened because Dodge needed to meet federal fuel economy and emissions standards while keeping the performance feel drivers expect from a Hemi.

The badge itself refers to the hemispherical combustion chamber shape inside the cylinder head—a design that improves how fuel burns and how air moves through the engine. Dodge used this design in the original Hemis of the 1950s and 1960s, and brought it back for the V8 versions from 2003 onward. The new turbocharged engine uses the same hemispherical chamber principle, which is why Dodge kept the name, even though the engine architecture is fundamentally different.

Key Takeaways

  • The 2024 Hemi is a 3.0-liter turbocharged inline-six engine, not a V8, and produces around 420 horsepower compared to the previous V8's 370 to 485 horsepower depending on the year.
  • Turbocharging forces more air into the cylinders, allowing a smaller engine to make power comparable to a much larger naturally aspirated engine.
  • The new Hemi meets stricter federal fuel economy and emissions rules that the old V8 could not satisfy without major redesign.
  • Maintenance for a turbocharged engine differs from a V8: oil changes matter more, boost pressure stresses components harder, and repair costs can be higher when turbo parts fail.
  • Dodge also offers a plug-in hybrid Hemi option on some models, which pairs the turbocharged engine with electric motors for even better fuel economy.

How a turbocharged engine replaces what a bigger V8 did

A V8 makes power by burning fuel in eight cylinders, each firing once per engine revolution. A 3.0-liter turbocharged inline-six burns fuel in six cylinders but uses a turbocharger—a turbine spun by exhaust gases—to force extra air into those cylinders on each stroke. More air means more fuel can burn, and more fuel burning means more power. The result is that a smaller, lighter engine can match or exceed the output of a much larger one.

The trade-off is complexity and stress. A turbocharger runs at extremely high speeds—sometimes over 150,000 rpm—and operates in the hottest part of the exhaust stream. That heat and speed demand tighter tolerances in the engine block, stronger internal parts, and more frequent oil changes. The oil cools and lubricates the turbo bearing, so dirty or thin oil will damage it faster than it would damage a naturally aspirated V8.

Fuel economy improves because the engine is smaller and lighter, and because the turbo only works hard when you ask for power. Cruising at highway speed, the turbo spins slowly and uses less fuel than a V8 would. When you accelerate, the turbo spins up and delivers the power you need. This on-demand approach is why turbocharged engines became the standard way to meet emissions rules without sacrificing performance.

Why Dodge made this change now

Federal fuel economy standards (CAFE) and emissions regulations have tightened steadily since 2007. A large naturally aspirated V8 cannot meet these rules without a hybrid system or a transmission with many more gears. Dodge faced a choice: redesign the V8 with hybrid technology, switch to a smaller turbocharged engine, or discontinue the Charger and Challenger altogether.

The company chose the turbocharged path because it allowed them to keep the Charger and Challenger nameplate, preserve the performance character drivers expect, and avoid the cost and complexity of a full hybrid system on every model. The plug-in hybrid version (available on some 2024 models) adds electric motors for even better fuel economy on shorter trips, but the turbocharged engine alone was enough to meet the rules.

This is not unique to Dodge. Ford, Chevrolet, and other manufacturers have been moving away from large naturally aspirated V8s for years. The 2024 Mustang also switched to a turbocharged engine. Turbocharging is now the industry standard for performance cars that need to meet modern regulations.

What changes in maintenance and repair

Oil changes become more critical with a turbocharged engine. The turbo bearing rides on a thin film of oil, and that oil must be clean and the right viscosity (thickness) to protect it. Most turbocharged engines call for synthetic oil and shorter change intervals—often 5,000 miles instead of 7,500 or 10,000. Using the wrong oil weight or going too long between changes will shorten turbo life significantly.

Boost pressure also stresses other engine components harder than a naturally aspirated engine does. The pistons, connecting rods, and cylinder walls all experience higher pressure and temperature during combustion. This means internal engine parts are built stronger and heavier, which adds cost if they fail. A piston replacement in a turbocharged engine is more expensive than in a naturally aspirated one because the parts themselves cost more and the labor is more involved.

The turbocharger itself is a wear item. It typically lasts 100,000 to 150,000 miles with proper maintenance, but can fail earlier if oil is neglected or if the engine is driven hard when ready after starting (before oil pressure builds). A turbo replacement costs between $1,500 and $3,000 in parts and labor, depending on the shop and whether other damage occurred. This is a real cost to budget for if you plan to keep the car long-term.

Intercooler cleaning and inspection are also part of turbocharged engine care. The intercooler cools the compressed air before it enters the cylinders, and carbon buildup or debris can reduce its effectiveness. Most shops recommend a visual inspection every 50,000 miles and cleaning if needed.

Performance and driving feel compared to the old V8

The new turbocharged Hemi produces around 420 horsepower and 420 pound-feet of torque. The previous V8 Hemi produced between 370 and 485 horsepower depending on the year and model, with torque ranging from 410 to 475 pound-feet. On paper, the new engine is in the middle of that range, but the way power arrives is different.

A naturally aspirated V8 builds power smoothly as engine speed increases. A turbocharged engine delivers most of its power in a narrower rpm range—typically between 2,500 and 5,500 rpm—where boost pressure is highest. This means acceleration feels more aggressive in the middle of the rev range but may feel less responsive at very low speeds or very high speeds. Some drivers prefer the turbo feel; others miss the linear power delivery of the V8.

The turbocharged engine is also quieter at idle and during light driving, because the turbo is not spinning hard. Under hard acceleration, you will hear the turbo spool up and the engine note change. This is normal and not a sign of trouble, but it sounds different from the V8's steady roar.

Reliability and long-term durability

Turbocharged engines have been in production for decades and are proven reliable when maintained correctly. The new Hemi is based on the same engine family that powers other Stellantis vehicles (Jeep, Ram, Chrysler), so there is a track record to draw from. Early reports from owners and shops have not shown widespread problems, but it is still too early for a full long-term assessment.

The main reliability risk is owner neglect. Skipping oil changes, using the wrong oil, or driving the car hard before it warms up will shorten the turbo's life and potentially damage the engine. If you follow the maintenance schedule in your owner's manual and use the correct synthetic oil, the engine should be as reliable as any modern turbocharged engine.

One advantage of the turbocharged design is that it has fewer moving parts than a V8. Six cylinders instead of eight means fewer valve trains, fewer spark plugs, and fewer things that can wear out. This simplicity can offset some of the added complexity of the turbocharger itself.

Fuel economy and real-world efficiency

The EPA rates the 2024 Charger with the turbocharged Hemi at approximately 21 to 23 mpg combined, depending on transmission and drivetrain. The previous V8 Charger was rated around 16 to 18 mpg combined. That is a meaningful improvement, though real-world numbers vary based on driving habits and conditions.

Aggressive driving—frequent hard acceleration and high-speed cruising—will lower fuel economy significantly on any turbocharged engine. The turbo works harder, boost pressure climbs, and fuel consumption rises. Smooth, steady driving will show the efficiency advantage more clearly. If you drive mostly on the highway at steady speeds, you will see better fuel economy than in city driving with frequent stops and starts.

The plug-in hybrid version (available on some models) adds a battery and electric motors, which can improve efficiency further on shorter trips. However, it adds weight and cost, and the battery requires charging infrastructure. For drivers who want the simplest approach, the turbocharged engine alone delivers the efficiency gain without the added complexity.

Frequently Asked Questions

Is the new Hemi as powerful as the old V8?

The new turbocharged Hemi produces around 420 horsepower, which is in the middle of the range the old V8 produced (370 to 485 hp depending on year). Power delivery is different—the turbo concentrates power in a narrower rpm band—but acceleration and top speed are comparable for most driving situations.

Will a turbocharged engine last as long as a V8?

Yes, if maintained correctly. Turbocharged engines are proven reliable, but they demand more frequent oil changes and the correct oil type. The turbocharger itself typically lasts 100,000 to 150,000 miles. Neglecting maintenance will shorten its life significantly.

Can I modify or tune a turbocharged Hemi?

Yes, but carefully. Increasing boost pressure or fuel delivery will increase power, but it also increases stress on internal engine parts that are already running near their limits. Modifications should be done by shops experienced with turbocharged engines, and you should expect reduced reliability and durability if you push beyond the factory tune.

What oil should I use in the new Hemi?

Check your owner's manual for the exact specification, but most turbocharged Hemis call for synthetic oil meeting Chrysler MS-13446 or similar standards. The viscosity is usually 0W-40 or 5W-40. Using the wrong oil or conventional oil instead of synthetic will damage the turbo bearing.

Is the new Hemi more expensive to repair than the old V8?

Yes, generally. Turbocharged engines have more expensive internal parts, and turbo repairs or replacement can cost $1,500 to $3,000. However, the engine has fewer cylinders and simpler valve trains, which can offset some costs. Budget for higher maintenance and repair expenses if you plan to keep the car beyond the warranty period.