An open face helmet covers your head and ears but leaves your face exposed

An open face helmet is a motorcycle or powersports helmet that wraps around the back and sides of your head, covers your ears, and extends down to your chin — but has no front shield or visor. Your entire face is open to the air and to impact. This design trades some protection for visibility and ventilation, which is why riders choose them despite the trade-off.

The shell itself is made from the same materials as full-face helmets: a hard outer layer (usually polycarbonate or fiberglass) bonded to an inner foam liner that absorbs impact energy. The difference is what that shell covers. An open face helmet protects the crown, back, and sides of your head — the areas most likely to hit pavement in a slide — but your forehead, nose, cheeks, and jaw are completely exposed.

Key Takeaways

  • Open face helmets protect the top and back of your head but leave your entire face exposed to wind, debris, and impact.
  • The DOT safety standard (FMVSS 218) has different impact zones for open face versus full-face helmets, reflecting their different coverage areas.
  • Face injuries from open face helmet crashes are common because the unprotected areas absorb direct impact and road friction.
  • Aftermarket shields and chin bars can be added to some open face models, but they are not original equipment and may not meet safety standards.
  • Choosing between open face and full-face depends on your riding environment, speed, and how much facial protection matters to you.

What parts of your head an open face helmet actually protects

An open face helmet covers the crown (top of head), the back of the skull, and the sides down to ear level. The shell extends forward to the eyebrow line but stops there. This means the helmet protects against impacts to the areas that typically strike the ground first when a rider goes over the handlebars or slides sideways — the top and rear of the head.

The chin bar on an open face helmet is short and does not extend across the jaw. It sits under your chin and protects the underside of your jaw and throat area, but your lower face — your jaw, cheeks, and chin — remain exposed. In a crash, if your face hits the pavement, the helmet does nothing to slow that impact or reduce friction burns.

Where an open face helmet leaves you vulnerable

Your entire face is unprotected: forehead, nose, cheeks, lips, teeth, and jaw. In a crash where your head rotates forward or you slide face-first, these areas absorb the full force of impact against pavement, gravel, or other vehicles. Road rash — friction burns from sliding across asphalt — is common on the face and neck of open face helmet wearers.

Wind and debris are also constant hazards. At highway speeds, rain, insects, and road spray hit your face directly. Gravel kicked up by other vehicles can strike your eyes and face. Cold wind can make long rides uncomfortable and can affect your ability to see clearly. Some riders add aftermarket shields or use goggles, but these are not part of the original helmet design and may not integrate safely with the shell.

DOT safety standards for open face helmets

The U.S. Department of Transportation sets the standard FMVSS 218, which applies to all motorcycle helmets sold in the United States. Open face helmets must meet the same impact absorption and retention requirements as full-face helmets, but the test zones are different. DOT tests the crown, back, and sides of an open face helmet — the areas it actually covers — rather than the full sphere.

This does not mean open face helmets are less safe in the areas they do protect. A DOT-certified open face helmet has passed the same impact and retention tests as a full-face model. The difference is that DOT certification only verifies protection in the zones the helmet covers. It does not test or certify face protection because open face helmets do not provide it.

When shopping, look for the DOT sticker on the back of the helmet. If it is missing, the helmet has not been tested and may not meet minimum safety standards. Some helmets sold online or internationally may not carry DOT certification even if they look similar to certified models.

Open face versus full-face: the protection trade-off

FeatureOpen FaceFull-Face
Face protectionNoneComplete
VisibilityWider field of viewSlightly restricted by shield
VentilationExcellentGood (varies by model)
Wind noiseHigherLower
Typical useCity riding, cruisers, lower speedsHighway, sport bikes, all speeds
Crash injury risk to faceHighLow

Open face helmets are lighter and cooler because they have less material and allow air to flow directly across your face. They offer a wider field of view and feel less claustrophobic. For slow-speed city riding or cruiser-style motorcycles, many riders prefer them. The trade-off is that your face absorbs the full impact and friction of a crash.

Full-face helmets cover your entire head and face, including a protective shield in front of your eyes. They are heavier, warmer, and restrict your field of view slightly. But they protect your face from impact, friction, wind, and debris. Most sport bike riders and highway riders choose full-face helmets because the speeds and crash risks are higher.

Adding a shield or chin bar to an open face helmet

Some aftermarket companies sell shields, chin bars, or modular conversion kits designed to attach to open face helmets. These are not original equipment and are not tested as part of the helmet's safety system. Adding a shield changes how the helmet absorbs and distributes impact forces, and the attachment points may not be designed to handle the extra stress.

If you are considering an aftermarket shield, check whether the helmet manufacturer approves it for that specific model. Some helmets have reinforced attachment points designed for optional shields; others do not. An unapproved shield may compromise the helmet's structural integrity or create new failure points in a crash.

A better option is to choose a full-face helmet from the start if face protection matters to you. Full-face helmets are engineered as complete systems, and the face shield is integrated into the safety design. They are also widely available and cost roughly the same as a quality open face helmet.

Maintenance and replacement for open face helmets

Open face helmets need the same care as any helmet: inspect the shell and liner for cracks or dents after any impact, replace the helmet if it has been in a crash (even if damage is not visible), and clean the shell regularly with mild soap and water. The foam liner degrades over time from UV exposure and sweat, so most manufacturers recommend replacing a helmet every three to five years even if it has not been crashed.

Check the chin strap and retention system regularly. The strap should be snug enough that the helmet does not move when you push on it, but not so tight that it cuts off circulation. If the strap is frayed or the buckle is cracked, replace it before your next ride.

Frequently Asked Questions

Can I add a face shield to an open face helmet?

Some open face helmets have reinforced attachment points for optional shields, but not all do. Check your helmet's manual or contact the manufacturer before buying an aftermarket shield. An unapproved shield may not attach safely or may change how the helmet absorbs impact.

Is an open face helmet legal?

Yes, open face helmets are legal in all U.S. states that require helmets. They must be DOT-certified, which means they have passed federal impact and retention tests. Some states have additional rules about helmet color or reflectivity, so check your state's motorcycle safety laws.

What should I do if my open face helmet gets damaged?

If the shell has visible cracks or dents, or if the helmet has been in any impact, replace it. Foam damage is often invisible from the outside but compromises protection. If you are unsure, err on the side of replacement — a new helmet costs less than facial reconstruction.

Do I need goggles with an open face helmet?

Goggles are not required by law, but many open face helmet riders use them to protect their eyes from wind, insects, and debris. Make sure any goggles you choose do not interfere with the helmet's fit or retention system.

Why do some riders choose open face helmets if they offer less protection?

Open face helmets offer better ventilation, a wider field of view, and feel less restrictive. For city riding at lower speeds, many riders accept the trade-off. The choice depends on your riding environment, speed, and how much facial protection matters to you.