What an outside rear view mirror does and why it matters

Your outside rear view mirrors let you see traffic beside and behind your vehicle without turning your head. Each mirror covers a blind spot that your windshield and side windows cannot reach. A damaged, misaligned, or missing mirror makes lane changes and parking dangerous because you lose sight of vehicles, cyclists, and pedestrians in those zones.

Most vehicles have two outside mirrors—one on each door. Some trucks and vans have additional mirrors mounted higher or wider to see further along the sides. All of them serve the same purpose: expanding your view of the road without relying on your neck to turn.

Key Takeaways

  • A cracked mirror glass can be replaced separately from the mirror housing on most vehicles, costing less than replacing the entire assembly.
  • Mirror adjustment should position the horizon line in the center of each mirror, with your vehicle's side just visible at the edge.
  • Power mirrors use electric motors controlled by a switch inside the cabin; manual mirrors require you to push or pull the glass directly.
  • A bent or damaged mirror housing usually requires full replacement, which takes 15 to 45 minutes depending on whether it is bolted or glued to the door.

When your mirror glass cracks or fogs up

Mirror glass can crack from impact, road debris, or temperature shock. If only the glass is damaged and the metal or plastic housing is intact, you can often replace just the reflective surface. Many auto parts stores sell replacement mirror glass kits with adhesive backing that stick onto the existing frame. This costs between $15 and $50 per mirror and takes about 10 minutes to install.

Fogging happens when moisture seals itself inside the mirror assembly, usually because a drain hole is blocked or the seal has failed. Some mirrors have small heater elements that defog the glass when you turn on the rear window defroster. If the fogging is permanent, the entire mirror assembly must be replaced because the seal cannot be reopened without destroying the glass.

How to adjust your mirrors correctly

Proper mirror adjustment reduces blind spots and lets you see lane changes without moving your head. Sit in the driver's seat and adjust each mirror so the horizon line (where sky meets road) runs through the center of the glass. Your vehicle's side should be barely visible at the far edge of the mirror.

For power mirrors, use the switch on your door panel. Most switches have a small joystick or rocker that lets you select which mirror (left or right) and then move it up, down, left, or right. For manual mirrors, reach out the window or open the door and push or pull the glass frame itself. Check your adjustment by looking over your shoulder—if you can see a vehicle in your side mirror that you cannot see in your peripheral vision, the angle is correct.

Replacing a damaged mirror housing

If the mirror frame is bent, cracked, or the mounting bracket is broken, the entire assembly must be replaced. The process differs depending on how your mirror is attached. Some mirrors bolt to the door from inside the door panel; others are glued on with adhesive and must be pried off carefully. A few high-end vehicles have mirrors that are welded or riveted, which require professional removal.

To remove a bolted mirror, open the door panel (usually held by clips and a few screws) and unbolt the mirror from inside. Disconnect any wiring for power mirrors or heated glass. To remove a glued mirror, use a heat gun to soften the adhesive, then pry gently with a plastic tool to avoid damaging the door. Clean off old adhesive with rubbing alcohol before installing the new mirror. Installation takes the reverse steps: bolt or glue the new assembly, reconnect wiring, and test all functions before closing the door panel.

Replacement mirror assemblies cost between $100 and $400 depending on whether they include power adjustment, heating, or integrated turn signals. OEM (original equipment manufacturer) mirrors match your vehicle exactly but cost more. Aftermarket mirrors are cheaper and fit most vehicles but may not have all the features of the original.

Power mirror switches and wiring problems

Power mirrors use a small electric motor inside the housing to move the glass. The switch on your door sends power to that motor through wires in the door frame. If your mirror will not move when you use the switch, the problem could be a blown fuse, a broken switch, a disconnected wire, or a failed motor inside the mirror.

Start by checking the fuse. Your owner's manual shows which fuse controls the mirrors; it is usually a 10 or 15 amp fuse in the interior fuse box. If the fuse is blown, replace it with one of the same amperage. If it blows again when ready, there is a short circuit and you need professional diagnosis. If the fuse is good but the mirror still will not move, the switch or wiring is likely damaged. A mechanic can test the switch with a multimeter and trace the wiring through the door to find the break.

Heated mirrors and defroster function

Many mirrors include heating elements that warm the glass to melt frost and fog. These are controlled by a separate button on your dashboard, usually labeled with a rear window symbol. When you press the button, electricity flows through wires to heating coils behind the mirror glass.

If your heated mirrors do not work, first check that the rear window defroster button is actually on—some vehicles require you to set up the rear defroster to heat the mirrors as well. If the button is on and the mirrors are still cold after a minute, the heating element has failed and the mirror assembly must be replaced. You cannot repair the heating element separately because it is bonded to the glass during manufacturing.

Frequently Asked Questions

Can I drive safely with a cracked mirror?

A cracked mirror is unsafe because it distorts your view and the pieces can fall off while driving. Most states require both outside mirrors to be intact and functional. You should replace the glass or the entire assembly before driving on public roads.

What is the difference between OEM and aftermarket mirrors?

OEM mirrors are made by your vehicle's manufacturer and match the original exactly, including all features and finishes. Aftermarket mirrors are made by third-party companies and cost less but may lack features like heating or power adjustment. Both are safe if they fit your vehicle correctly.

How long does a mirror replacement take at a shop?

A straightforward glass replacement takes 15 to 30 minutes. A full mirror assembly replacement takes 30 to 45 minutes if the mirror is bolted on, or up to an hour if it is glued and requires door panel removal. Labor costs vary by shop and region.

Why does my mirror fog up even when the defroster is on?

Fogging inside the mirror means moisture has entered the sealed assembly, usually through a blocked drain hole or a failed seal. The defroster heats the glass but cannot remove the trapped moisture. The mirror assembly must be replaced.

Do I need to replace both mirrors at the same time?

No. You can replace one mirror without touching the other. However, if both are the same age and one has failed, the other may fail soon. Some drivers choose to replace both for consistency in appearance and features.