Park information Off is a driver override that disables your vehicle's parking information system
Park information Off is a button or menu setting that turns off the automated parking features in your vehicle. When active, it prevents the system from alerting you to obstacles, measuring parking spaces, or helping you steer into a spot. Most vehicles with this feature let you toggle it on and off through the dashboard or steering wheel controls, and the setting usually resets to "on" the next time you start the engine.
The system itself uses cameras, radar, or ultrasonic sensors mounted around your vehicle to detect nearby objects and available spaces. When you disable it, those sensors stop feeding information to the parking system, though they may still power other safety features like collision warning or blind-spot detection depending on your vehicle's design.
Key Takeaways
- Park information Off disables parking alerts and automated steering help, but does not affect other safety systems like collision avoidance or blind-spot monitoring.
- The setting typically resets to on when you restart your vehicle, so you must turn it off each time if you want it disabled.
- You might disable it in tight urban spaces where false alerts are frequent, during towing, or when the sensors are dirty or malfunctioning.
- Turning off park information does not void your warranty or damage the system, and you can re-enable it at any time.
Where to find the Park information Off button or setting
The location varies by manufacturer and model year. In many vehicles, it is a dedicated button on the dashboard near the steering wheel, often marked with a parking symbol or the letter "P" with a line through it. In others, you access it through the infotainment touchscreen under settings menus labeled "Parking," "Driver information," or "Safety Features."
Check your owner's manual for the exact location in your vehicle. If you cannot find it, search the manual for "park information," "parking aid," or "parking sensors." Some vehicles use different names: Ford calls it "Active Park information," Toyota uses "Parking Support Brake," and Audi refers to "Park information." The function is the same regardless of the brand name.
Why drivers turn Park information off
The most common reason is false or excessive alerts. Parking sensors can trigger warnings from nearby walls, curbs, or other parked cars even when you have plenty of room. In tight urban garages or narrow streets, these constant beeps and warnings become distracting rather than helpful.
Drivers also disable it when towing a trailer, because the sensors may not account for the extended length and can give misleading readings. If your sensors are dirty, covered with mud, or damaged, they may malfunction and produce unreliable alerts—turning the system off prevents confusion while you arrange cleaning or repair. Some drivers straightforward prefer to rely on mirrors and their own judgment in familiar parking situations.
What happens to other safety features when you turn it off
Park information Off typically disables only the parking-specific alerts and steering information. Other driver-information systems usually remain active. Collision warning, automatic emergency braking, blind-spot monitoring, and lane-keeping information operate independently and are not affected by the park information toggle.
However, this depends on your vehicle's architecture. Some systems share sensors with park information, so disabling one may reduce the effectiveness of others. Check your owner's manual or contact your dealer if you want to know which systems share hardware in your specific vehicle.
How to maintain parking sensors
Parking sensors work best when clean. Mud, snow, ice, and road salt can block the sensors and cause false alerts or failure to detect obstacles. Wash the sensor areas regularly with a soft cloth and water, especially after driving in winter or on unpaved roads.
If cleaning does not restore normal function, the sensors may be damaged or misaligned. A dealer can run a diagnostic test to confirm whether a sensor is faulty. Replacement costs vary widely by vehicle and number of sensors affected, but a single sensor typically runs between $200 and $500 including labor. If you are not ready to repair, turning off park information prevents the distraction of false warnings while you plan the repair.
Resetting Park information to default settings
Most vehicles reset the park information setting to "on" automatically when you turn off the engine and restart the vehicle. This means if you disable it for a single parking session, you will need to turn it off again the next time you drive.
Some newer vehicles let you save your preference through the driver profile or settings menu, so the system remembers your choice across multiple trips. Check your infotainment system's settings or owner's manual to see whether your vehicle supports persistent settings. If it does, you can set park information to off once and it will remain off until you manually change it again.
Park information Off and your vehicle's warranty
Disabling park information does not void your warranty. The feature is optional, and manufacturers design vehicles to function normally with it turned off. You can turn it on and off as many times as you want without affecting coverage for other systems or components.
If a parking sensor fails and you want it repaired under warranty, the fact that you previously disabled the system will not be held against you. Warranty claims are based on defects in materials or workmanship, not on how you use optional features.
Frequently Asked Questions
Does turning off Park information affect my fuel economy?
No. Park information is a passive system that monitors and alerts; it does not consume significant fuel or engine power. Disabling it will not change how your vehicle runs or how much gas you use.
Can I disable Park information permanently so it does not reset?
Most vehicles reset the setting when you restart the engine, but some newer models allow you to save your preference through the driver profile or settings menu. Check your owner's manual or infotainment system to see whether your vehicle supports persistent settings. If it does not, you will need to disable it each time you drive.
What if my Park information button does not work?
If the button is unresponsive or the system does not turn off, the button itself may be faulty or the system may have an electrical issue. Try accessing the setting through your infotainment menu instead. If neither method works, contact your dealer for diagnosis. A malfunctioning button does not prevent you from driving safely.
Does Park information Off affect my backup camera?
Not usually. Backup cameras and parking sensors are separate systems in most vehicles. Disabling park information typically does not affect the camera display. However, some vehicles integrate these features, so check your owner's manual to confirm which systems are linked in your model.
Should I turn off Park information in winter or bad weather?
You can, but it is not necessary. Snow and ice can reduce sensor accuracy, which may cause false alerts. If the warnings become too frequent or unreliable, disabling the system is a reasonable choice. Just remember that you will lose the alerts, so rely more heavily on mirrors and your own observation when backing up or parking.