What you need to know before replacing a passenger mirror

A passenger mirror replacement usually costs between $200 and $1,000 at a dealership, or $100 to $500 at an independent shop, depending on whether you need just the glass, the entire mirror housing, or the motor and wiring inside. You can often replace it yourself for $50 to $300 in parts if you have basic tools and are comfortable removing trim panels. The job takes 30 minutes to two hours depending on your vehicle and whether the mirror is powered or manual.

Before you start, check whether your mirror is power-operated (controlled by a switch inside the car) or manual (adjusted by hand). Power mirrors require you to disconnect an electrical connector; manual mirrors do not. You also need to know if your mirror glass is glued on, clipped on, or screwed on — this varies by make and model and determines how you remove it.

Key Takeaways

  • Passenger mirror replacement costs $200 to $1,000 at a dealership or $100 to $500 at an independent shop, but you can do it yourself for $50 to $300 in parts.
  • Power mirrors require you to disconnect an electrical connector inside the door; manual mirrors do not.
  • The mirror glass, housing, and motor are often sold separately, so you need to know which part is actually broken before you order a replacement.
  • Most vehicles require you to remove interior door trim to access the mirror bolts, which takes 10 to 20 minutes and a trim removal tool or flathead screwdriver.
  • If the mirror glass is cracked but the housing is intact, you can often replace just the glass for $30 to $80 instead of the whole mirror.

Identifying what part of the mirror is broken

Mirrors have three main components: the glass, the housing (the plastic or metal frame), and the motor and wiring (if it is power-operated). You need to know which one is damaged so you order the right replacement part.

If only the glass is cracked or missing, you can buy a replacement glass insert for $30 to $80 and snap or glue it into your existing housing. If the housing is cracked, bent, or broken, you need to replace the entire mirror assembly, which costs $100 to $400 depending on the vehicle. If the mirror does not move when you use the power adjustment switch, the motor or wiring is likely the problem — this usually requires replacing the whole assembly rather than just the motor.

Getting the right replacement part for your vehicle

Go to a parts store with your vehicle's year, make, model, and trim level, or order online using your vehicle identification number (VIN). The VIN is printed on your registration, insurance card, or the driver's side door jamb. Parts stores will ask whether you want an OEM part (made by your car's manufacturer) or an aftermarket part (made by a third party).

OEM parts cost more but fit exactly and usually come with a warranty. Aftermarket parts cost less but quality varies — read reviews before ordering. Some aftermarket mirrors do not include the motor or wiring harness, so check the product description carefully. If you are unsure, call the parts store and describe your mirror: "2019 Honda Civic passenger side power mirror with heated glass."

Removing the old mirror yourself

Start by locating the bolts that hold the mirror to the door. On most vehicles, you access these from inside the door by removing the interior trim panel. Use a plastic trim removal tool or a flathead screwdriver wrapped in tape to pry the panel away from the door — start at a corner and work slowly so you do not crack the panel. Once the panel is off, you will see three bolts (usually) holding the mirror to the door frame.

If your mirror is power-operated, disconnect the electrical connector before you remove the bolts. The connector is usually a small plug near the mirror bolts. Unplug it by pressing a small tab or clip and pulling it straight out. Then remove the three bolts with a socket wrench or screwdriver — they are usually 10mm or 12mm. Pull the mirror straight out and away from the door.

If you are replacing only the glass, look for a clip or screw on the back of the mirror housing. Some mirrors have a small lever you rotate to release the glass; others have a screw you remove. Gently pry the old glass out and snap or glue the new one in place. If the glass is glued, use a heat gun or hair dryer to warm the adhesive first, then pry carefully with a plastic tool so you do not scratch the housing.

Installing the new mirror

If you are installing a new mirror assembly, position it against the door frame and align the bolt holes. Insert the three bolts by hand first so they do not cross-thread, then tighten them with a socket wrench. Do not over-tighten — stop when the mirror is snug and does not move. If your new mirror is power-operated, plug the electrical connector back in before you reinstall the door trim.

Test the mirror before you close up the door. Adjust it with the power switch to make sure the motor works. If the mirror does not move, unplug the connector, wait 10 seconds, and plug it back in — sometimes the motor needs to reset. If it still does not work, the wiring or motor may be faulty and you may need to return the part or have a shop diagnose it.

When to take it to a shop instead

If your mirror is integrated into the door (some newer vehicles glue the mirror directly to the door skin), you should not attempt removal yourself — you risk damaging the door. If your vehicle has a heated mirror, rain sensor, or blind-spot camera built into the mirror, the wiring is more complex and a shop is safer. If you do not have a trim removal tool or are uncomfortable working inside the door, a shop will charge $100 to $300 in labor to remove and install the mirror.

If the mirror bolts are stuck or corroded, a shop has the tools to remove them without stripping the threads. If the door frame is bent or the bolt holes are damaged, a shop can assess whether the mirror can be safely reinstalled or if the door needs repair first.

Frequently Asked Questions

Can I drive with a broken passenger mirror?

Most states require both side mirrors to be present and functional, so a missing or severely damaged mirror can result in a ticket. A cracked mirror that still reflects is usually legal, but check your state's vehicle code. A broken mirror also reduces your visibility, which increases accident risk.

How do I know if the mirror glass is glued or clipped on?

Look at the back of the mirror housing. If you see a small clip or lever, the glass is clipped. If you see nothing but smooth plastic, the glass is likely glued. You can also gently try to pry the edge of the glass with a plastic tool — if it moves slightly, it is clipped; if it does not budge, it is glued and needs heat to remove safely.

What if I order the wrong mirror part?

Most parts stores allow returns within 30 days if the part is unused and in original packaging. Keep your receipt and the packaging. If you ordered online, check the seller's return policy before you open the box. If the part does not fit, take a photo of the part number on your old mirror and compare it to the new one — they should match exactly.

Do I need to reprogram a new power mirror?

Most power mirrors do not require programming — they work as soon as you plug them in. Some vehicles have a memory feature that lets you save mirror positions; check your owner's manual to see if you need to reprogram it after installation. If the mirror does not work after you plug it in, the issue is usually a bad connection or a faulty part, not a programming problem.

Is it cheaper to replace just the glass or the whole mirror?

If only the glass is cracked, replacing just the glass costs $30 to $80 and takes 10 minutes. Replacing the whole mirror costs $100 to $400 and takes 30 to 60 minutes. If the housing or motor is also damaged, you have no choice but to replace the whole assembly. Check the cost of both options before you decide — sometimes a whole mirror is only slightly more expensive than the glass alone.