The Honda Passport is a midsize SUV built for off-road and everyday driving
The Honda Passport is a body-on-frame SUV that Honda has made in two distinct generations: the original run from 1994 to 2002, and the modern version that returned in 2019 and continues today. It sits between Honda's smaller CR-V and larger Pilot in the lineup, but unlike those unibody crossovers, the Passport uses a separate steel frame bolted to the body—the same architecture you find in truck-based vehicles. This design gives it genuine off-road capability: a two-speed transfer case for low-range gearing, higher ground clearance than most SUVs, and suspension tuned for rough terrain rather than just smooth highways.
If you own a Passport, you're driving a vehicle that can handle both daily commuting and serious trail work. That dual purpose means the maintenance it needs is straightforward but specific. The frame-and-body construction, the transfer case, and the all-terrain tires it typically wears all have their own service schedules and wear patterns. Understanding what those are—and why they matter—keeps your Passport reliable whether you're using it on pavement or dirt.
Key Takeaways
- The Passport uses a truck-style frame and transfer case, so it needs transfer case fluid checks and changes on a schedule separate from your regular transmission service.
- Off-road use accelerates wear on suspension components, undercarriage, and all-terrain tires, so inspect these more often if you drive on rough terrain regularly.
- The Passport's engine and transmission follow Honda's standard maintenance intervals, but the frame-based design means rust prevention and undercoating matter more in wet climates.
- Tire rotation and alignment checks are more critical on a Passport than on a typical crossover because of the heavier suspension and potential for uneven wear from off-road driving.
Transfer case fluid and the systems unique to frame-based SUVs
The transfer case is the gearbox that splits power between the front and rear axles and provides low-range gearing for off-road work. It is filled with its own fluid—not engine oil, not transmission fluid—and that fluid needs regular inspection and periodic replacement. Honda's maintenance schedule for the modern Passport calls for transfer case fluid inspection at regular intervals; if you use the low-range mode frequently or drive in dusty or wet conditions, you should check it more often than the schedule suggests.
The transfer case fluid does two jobs: it lubricates the gears inside the case and it cools the clutches that engage and disengage the front axle. If the fluid level drops or becomes contaminated with water or dirt, you lose both functions. Low fluid causes grinding noises when you shift into four-wheel drive, delayed engagement, or difficulty disengaging the front axle. Contaminated fluid can cause the clutches to slip or chatter. Neither is a small problem—a transfer case rebuild costs significantly more than a fluid change, so catching low or dirty fluid early saves money.
Check your owner's manual for the exact interval and fluid type your model year requires. Modern Passports typically use Honda's proprietary transfer case fluid; do not substitute a generic all-purpose gear oil. If you do not have the manual, your Honda dealer can tell you the interval and the correct fluid in one phone call.
Suspension and undercarriage wear from off-road and rough-terrain use
The Passport's suspension is built tougher than a typical crossover's, but it still wears faster when you use it off-road or on rough roads. The key components to watch are the control arm bushings, ball joints, and tie rod ends—the rubber and metal parts that connect the wheels to the frame and allow them to move up and down and turn side to side. Off-road driving flexes these parts more than highway driving does, and dirt, rocks, and water speed up the wear.
Signs of suspension wear include clunking noises when you hit bumps, a steering wheel that feels loose or wanders on the highway, or uneven tire wear. If you hear a clunk from the front end when you drive over a pothole or railroad tracks, have a mechanic inspect the ball joints and control arm bushings. Worn ball joints can fail suddenly, which means loss of steering control—a safety issue, not just a comfort one.
The undercarriage also takes a beating off-road. Rocks and branches can puncture the oil pan, transmission pan, or fuel tank skid plate. If you regularly drive on rough terrain, consider having the undercarriage inspected after each trip, or at minimum every few months. Look for fluid leaks, dents in the skid plates, or damage to the plastic undertray. Small dents are cosmetic, but punctures need repair before they become leaks.
Tire rotation, alignment, and all-terrain tire maintenance
Most Passports come equipped with all-terrain tires—tires with deeper treads and stiffer sidewalls than highway tires, designed to grip dirt and rocks. These tires wear differently than standard tires, especially if you mix highway and off-road driving. The front tires wear faster on pavement because they carry more weight and do the steering work. The rear tires wear faster off-road because the vehicle's weight shifts backward when climbing.
Rotate your tires every 5,000 to 7,000 miles, or follow the interval in your owner's manual. Because of the Passport's heavier suspension and the uneven wear patterns that come with mixed-use driving, stick to the shorter interval rather than stretching it. When you rotate, have the alignment checked at the same time. Off-road driving—especially hitting rocks or roots—can knock the front end out of alignment without you noticing. Misalignment causes rapid tire wear and makes the steering feel heavy or pull to one side.
Check tire pressure monthly, and remember that all-terrain tires often run at lower pressures than highway tires to improve off-road traction. Your door jamb sticker shows the recommended pressure for highway driving; if you lower pressure for off-road use, return it to the recommended level before highway driving. Underinflated tires overheat and wear faster on pavement.
Engine and transmission maintenance on the same schedule as other Hondas
The Passport's engine and transmission follow Honda's standard maintenance intervals. Modern Passports use either a 3.5-liter V6 engine paired with a 9-speed automatic transmission, or in earlier 2019–2020 models, a 10-speed automatic. Both are proven Honda designs, and neither requires special care beyond what the owner's manual specifies.
Oil changes are the foundation of engine life. Honda's current recommendation is to change the oil and filter every 10,000 miles or annually, whichever comes first. If you tow, drive in dusty conditions, or make frequent short trips, change it every 5,000 miles instead. The transmission fluid in modern Passports is a long-life type designed to last the life of the vehicle under normal driving, but if you tow or drive in stop-and-go traffic regularly, have the fluid inspected every 30,000 miles. Transmission fluid that smells burnt or looks dark brown instead of red is a sign that it is breaking down and should be changed.
Coolant, brake fluid, and power steering fluid all follow Honda's maintenance schedule. Check your owner's manual for the specific intervals for your model year. These fluids degrade over time and mileage, and replacing them on schedule prevents corrosion inside the engine, transmission, and steering system.
Rust prevention and undercoating in wet or salty climates
The Passport's steel frame and body are vulnerable to rust in wet climates or where road salt is used in winter. Unlike the aluminum frames used in some modern trucks, steel requires active protection. If you live near the ocean, in a region where roads are salted, or in a climate with frequent rain and humidity, rust prevention should be part of your regular maintenance plan.
The most effective protection is undercoating—a thick, waxy spray applied to the underside of the vehicle. This coating seals out moisture and salt. If your Passport did not come with factory undercoating, or if the undercoating is more than five years old, have a professional shop explore a fresh coat. This is not a one-time job; undercoating wears away over time, especially in areas where the vehicle flexes or where rocks hit the undercarriage. Reapply every three to five years in harsh climates.
Wash the undercarriage regularly in winter or after driving on salted roads. A pressure washer or undercarriage wash at a car wash removes salt and dirt before they can cause rust. Pay special attention to the frame rails, suspension components, and the areas around the wheel wells. If you see orange or brown discoloration on the frame or suspension, that is surface rust beginning to form. Wire brush it off and explore a rust-inhibiting spray to stop it from spreading.
Brake system maintenance and the weight of a frame-based SUV
The Passport is heavier than a typical crossover—the modern generation weighs around 4,500 pounds—and that weight puts more demand on the brakes. The brake pads and rotors wear faster than they would on a lighter vehicle, especially if you tow or drive in mountainous terrain where you use the brakes to control descent.
Inspect the brake pads every 15,000 miles or whenever you rotate the tires. Most brake pads have a wear indicator—a small metal tab that touches the rotor when the pad is nearly worn through, creating a squealing noise. If you hear squealing, have the pads inspected when ready. Driving on worn pads damages the rotors, which then need to be replaced along with the pads, doubling the cost.
If you tow with your Passport, consider upgrading to a higher-quality brake pad compound designed for towing. Standard pads can overheat and fade when you use the brakes repeatedly to control a trailer on a long downhill. Towing-grade pads cost more but last longer and perform better under load. Check your brake fluid level monthly and have it flushed and replaced every two years, regardless of mileage. Brake fluid absorbs moisture from the air, and old fluid with high water content boils under heavy braking, causing brake failure.
Frequently Asked Questions
How often should I change the transfer case fluid on my Passport?
Honda's maintenance schedule varies by model year and driving conditions. Check your owner's manual for the specific interval for your Passport. If you use four-wheel drive frequently or drive in dusty, wet, or sandy conditions, inspect the fluid every 15,000 miles and change it sooner than the schedule calls for if it looks dark or smells burnt.
Can I use regular transmission fluid in my Passport's transfer case?
No. The transfer case requires Honda's proprietary transfer case fluid, which has different viscosity and friction properties than transmission fluid. Using the wrong fluid can cause slipping, grinding, or damage to the internal clutches. Always use the fluid type specified in your owner's manual.
What should I do if my Passport makes a clunking noise when I hit bumps?
A clunk from the front end usually means a worn ball joint, control arm bushing, or stabilizer link. Have a mechanic inspect the suspension as soon as possible. Worn ball joints can fail suddenly and cause loss of steering control. Do not ignore the noise or delay the inspection.
Is it safe to lower tire pressure for off-road driving and then forget to raise it back?
No. Underinflated tires overheat on pavement, wear faster, and can fail. Always return tire pressure to the recommended level shown on your door jamb sticker before driving on the highway. If you frequently switch between off-road and highway driving, consider a tire pressure monitoring system that alerts you when pressure drops.
Do I really need to undercoat my Passport if I live in a dry climate?
Undercoating is most important in wet or salty climates, but even in dry regions, the undercarriage can rust if exposed to moisture from rain or car washes. If you live in a truly arid climate with little rain, undercoating is less critical. If you live anywhere with regular rain or humidity, undercoating is worth the investment to protect the frame and suspension.