A PET scan on your 2017 SUV is a diagnostic test that measures how much unburned fuel and emissions your engine is producing, not a medical imaging procedure

The term "PET scan" in automotive maintenance refers to a Portable Emissions Test, a real-time measurement of what comes out of your tailpipe. A technician connects a probe to your exhaust system while the engine runs at idle and under load, recording oxygen levels, carbon dioxide, hydrocarbons, and nitrogen oxides. For a 2017 SUV, this test reveals whether your engine is burning fuel efficiently and whether your emissions control systems—the catalytic converter, oxygen sensors, and fuel injectors—are working as designed.

This is different from a standard emissions inspection, which most states require annually or at registration. A PET scan is a deeper diagnostic that a mechanic orders when your check engine light is on, fuel economy has dropped noticeably, or you're failing an emissions test. The results tell you whether the problem is a bad sensor, a clogged fuel injector, a failing catalytic converter, or something else entirely.

Key Takeaways

  • A PET scan measures real-time emissions from your tailpipe and shows whether your engine is burning fuel completely and efficiently.
  • High hydrocarbon or carbon monoxide readings point to incomplete combustion, usually caused by a bad oxygen sensor, fuel injector, or ignition coil.
  • Nitrogen oxide readings above normal suggest your engine is running too hot, often because the cooling system needs work or the EGR valve is stuck.
  • A 2017 SUV with a failed PET scan will not pass state emissions testing and may not be registered until the underlying problem is fixed.

What the numbers on a PET scan mean

A PET scan produces four main readings: hydrocarbons (HC), carbon monoxide (CO), carbon dioxide (CO2), and nitrogen oxides (NOx). Each one tells you something different about what is happening inside your cylinders.

Hydrocarbons are unburned fuel. If your reading is high, fuel is entering the combustion chamber but not igniting completely. This usually means a bad oxygen sensor sending the wrong signal to the fuel injectors, a clogged fuel injector spraying too much fuel, a weak spark plug or ignition coil, or low compression in one or more cylinders. On a 2017 SUV, a bad oxygen sensor is the most common culprit and costs $150 to $400 to replace.

Carbon monoxide is partially burned fuel. A high CO reading also points to incomplete combustion, often from the same causes as high hydrocarbons—bad sensors, fuel injectors, or spark plugs. Some mechanics check CO first because it narrows down the problem faster than hydrocarbons alone.

Carbon dioxide is what you want to see. High CO2 means fuel is burning completely. If your CO2 is low while HC and CO are high, your engine is not burning fuel efficiently, and the problem is almost certainly in the fuel delivery or ignition system.

Nitrogen oxides form when combustion temperatures get too high. A high NOx reading means your engine is running hotter than normal. Common causes are a stuck EGR valve (which recirculates exhaust to cool combustion), a cooling system that is not removing heat fast enough, carbon buildup on the intake valves, or timing that is too advanced. On a 2017 SUV, a stuck EGR valve or a cooling system flush often fixes this.

Why your 2017 SUV might fail a PET scan

Your 2017 SUV will fail a PET scan if any reading exceeds the standard set by your state's emissions program. Standards vary by state and sometimes by county, but federal baseline limits are roughly 200 ppm for hydrocarbons, 1,000 ppm for carbon monoxide, and 1,000 ppm for nitrogen oxides at idle. Under load, limits are tighter.

The most common reason a 2017 SUV fails is a bad oxygen sensor. Your SUV has at least two—one before the catalytic converter and one after—and both wear out over time. At 100,000 miles, they are often due for replacement. A bad upstream oxygen sensor throws off the fuel mixture, causing high hydrocarbons and carbon monoxide. A bad downstream sensor does not affect emissions directly but can trigger a check engine light and cause the engine computer to run in a safe mode that wastes fuel.

The second most common reason is a failing catalytic converter. If the converter is clogged or damaged, it cannot burn off the hydrocarbons and carbon monoxide that come from the engine. You will see high readings for both, and the check engine light will be on. Catalytic converter replacement on a 2017 SUV costs $800 to $2,500 depending on the model and whether you use an OEM or aftermarket part.

A third reason is carbon buildup on the intake valves. Gasoline engines naturally accumulate carbon over time, especially in stop-and-go driving. Heavy buildup restricts airflow, leans out the fuel mixture, and causes incomplete combustion. A fuel system cleaning or intake valve cleaning can fix this and costs $150 to $400.

How to prepare your 2017 SUV for a PET scan

Before you take your SUV to a shop for a PET scan, make sure the engine is in the best condition possible. Change the oil and oil filter if they are due. A fresh oil change does not directly affect emissions, but it ensures the engine is running cleanly and the computer is not distracted by other problems.

Check your fuel cap. A loose or missing fuel cap allows fuel vapors to escape and can trigger a check engine light. Tighten it or replace it—a new cap costs $10 to $20.

If your check engine light is on, have the code read before the PET scan. Many auto parts stores read codes for free. Knowing the code tells the technician where to focus. Common codes for emissions problems are P0133 (oxygen sensor circuit slow response), P0420 (catalytic converter efficiency below threshold), and P0300 (random misfire).

Drive your SUV normally for at least 50 miles before the test. The engine computer needs to complete its self-diagnostic cycle, called the readiness monitors. If the monitors are not ready, some states will not let you test. A fresh engine start or a recent battery disconnect can reset the monitors, and it takes driving time to complete them again.

What happens after a failed PET scan

If your 2017 SUV fails a PET scan, you have two paths: fix the problem or use a state repair information program if one exists in your area.

Most states require you to fix the emissions problem before you can register the vehicle again. The repair must be done by a certified technician, and many states require a second PET scan to confirm the fix worked. Some states allow you to use a different shop for the retest, so you can get a second opinion if you want.

A few states offer repair information programs for vehicles that fail emissions tests. These programs may cover part or all of the cost of repairs if your household income is below a certain threshold. Contact your state's environmental agency or your local emissions testing center to ask whether a program exists and what the income limits are.

If the repair cost is very high—for example, a catalytic converter replacement on a luxury SUV—some states allow you to declare the vehicle a "gross polluter" and take it out of service rather than repair it. This is a last resort and usually requires the vehicle to be scrapped or sold out of state.

PET scan versus other emissions tests

A PET scan is more detailed than a standard tailpipe sniff test, which most states use for routine emissions inspections. A sniff test measures only hydrocarbons and carbon monoxide at idle, taking about 30 seconds. A PET scan measures all four pollutants at both idle and under load, taking 5 to 10 minutes, and gives you a printout showing exactly what is wrong.

A PET scan is also different from an OBD-II scan, which reads the fault codes stored in your engine computer. An OBD-II scan tells you what the computer thinks is wrong; a PET scan shows you what is actually coming out of the tailpipe. Sometimes the two agree, and sometimes they do not. A vehicle can have a stored code for a bad oxygen sensor but still pass a PET scan if the sensor is only intermittently failing. Conversely, a vehicle can fail a PET scan with no check engine light if the problem is not yet severe enough for the computer to flag it.

Frequently Asked Questions

How much does a PET scan cost?

A PET scan typically costs $50 to $150 at an independent shop or emissions testing center. Some shops include it free with a diagnostic if you are already paying for repairs. Dealerships may charge more, sometimes $100 to $200, but they are not required for emissions testing in most states.

Can I pass a PET scan with a check engine light on?

It depends on what the light is for. If the code is related to emissions—such as a bad oxygen sensor or catalytic converter—you will likely fail. If the code is unrelated, such as a transmission problem, you may still pass the PET scan. The only way to know is to have the code read and then run the test.

How often do I need a PET scan on my 2017 SUV?

You need a PET scan only if you fail a standard emissions test or your mechanic orders one as part of a diagnostic. Most 2017 SUVs pass routine emissions inspections without needing a PET scan. If your vehicle is failing regularly, a PET scan helps identify the root cause so you can fix it permanently rather than guessing.

What if my 2017 SUV passes a PET scan but still has a check engine light?

The light is triggered by a fault code, not by the PET scan results. You need to have the code read and diagnosed separately. Some codes are emissions-related and will show up on a PET scan; others are not. A mechanic can tell you whether the code requires repair or whether it is safe to ignore.