Engine mount replacement typically costs between $300 and $1,200 per mount, depending on which mount needs replacement, your vehicle's make and model, and whether you use a dealership or independent shop.
An engine mount is a rubber-and-metal component that holds your engine in place while absorbing vibration. Most vehicles have three to four mounts. When one fails, you'll notice excessive engine vibration, clunking sounds during acceleration or braking, or visible movement of the engine under the hood. Replacing a single mount costs less than replacing all of them, but labor time varies widely because some mounts are easier to access than others.
The total bill depends on three things: which mount failed, what your vehicle costs to work on, and where you have it done. A front engine mount on a Honda Civic might cost $400 total at an independent shop. The same repair on a luxury vehicle or one with a cramped engine bay could run $800 or more at a dealership. Some shops charge $100 to $200 per hour in labor; others charge more.
Key Takeaways
- Engine mount replacement costs range from $300 to $1,200 per mount, with labor making up 50 to 70 percent of the bill.
- The part itself usually costs $100 to $400, but labor time depends on how accessible the mount is in your specific vehicle.
- Dealerships typically charge 20 to 40 percent more than independent repair shops for the same work.
- Replacing all mounts at once costs more upfront but may be worth it if multiple mounts show signs of wear.
What the part and labor actually cost
The engine mount itself—the rubber-and-metal assembly—usually runs $100 to $400 depending on whether it's an OEM (original equipment manufacturer) part or an aftermarket replacement. OEM parts cost more but are may provide to fit your exact vehicle. Aftermarket parts are cheaper and often work just as well, though quality varies by brand.
Labor is where the cost climbs. A straightforward mount replacement takes one to three hours. At $120 per hour (a typical independent shop rate), that's $120 to $360 in labor alone. Dealerships often charge $150 to $250 per hour, pushing labor costs to $150 to $750 for the same job. Some mounts are buried under other components—like the air intake or transmission cooler—which adds time and cost.
A few vehicles have mounts that take 30 minutes to replace; others require removing the engine partially or dropping the subframe. Always ask the shop for a labor estimate before authorizing work. The estimate should specify how many hours they expect to spend and at what hourly rate.
How location and vehicle type change the price
Independent repair shops typically charge 20 to 40 percent less than dealerships for engine mount replacement. You pay for convenience and brand reputation at a dealership; you pay for lower overhead at an independent shop. Both should warranty their work, though the terms differ—dealerships often offer longer warranties.
Your vehicle's design matters more than you might think. Compact cars and trucks with accessible engine bays cost less to work on. Luxury vehicles, sports cars, and some crossovers have tighter engine compartments or require removing other parts first. A BMW or Audi mount replacement might cost $900 to $1,200 because the labor is more involved. The same repair on a Toyota Camry might cost $500 to $700.
Geographic location also shifts the price. Repair shops in urban areas and high-cost regions charge more per hour than shops in rural areas. A $500 repair in a small town might cost $700 in a major city, even at the same shop chain.
Signs you need engine mount replacement soon
Engine mounts wear out gradually, but certain signs mean replacement is coming. Excessive vibration felt through the steering wheel, seat, or floor when the engine is running is the most common warning. You might also hear a clunking or banging sound when you accelerate hard, brake suddenly, or shift gears. Some drivers notice the engine visibly moving side to side under the hood when they rev the engine in park.
A failed mount doesn't always require when ready replacement, but it gets worse over time. Continued driving on a bad mount can damage other engine components, transmission mounts, or the radiator if the engine moves too far. If you notice these signs, get a diagnosis from a shop within a few weeks rather than waiting months.
Replacing one mount versus all of them
You don't have to replace all mounts at once, even if more than one is worn. Most shops will replace only the failed mount unless you ask for more. However, if a diagnostic shows that two or more mounts are near failure, replacing them together saves labor time and money overall. You pay labor once instead of twice.
If your vehicle is older or has high mileage, ask the shop whether the other mounts look worn during the repair. Sometimes a technician can spot deterioration that hasn't caused symptoms yet. Replacing a second mount while the engine bay is already open might add only $150 to $300 in parts and a small amount of labor, versus paying full labor costs later when that mount fails.
Getting an accurate quote before you commit
Call or visit three shops—at least one dealership and two independent shops—and describe your symptoms. A good shop will ask which mount you think is failing (if you know) or offer to diagnose it for a small fee, usually $50 to $100. Some shops waive the diagnostic fee if you have the repair done there.
When you get a quote, make sure it includes the part cost, labor hours and hourly rate, and any additional parts or fluids needed. Ask whether the quote covers just the mount or includes other work like engine oil top-off or belt inspection. Confirm the warranty on both the part and the labor—typically one year or 12,000 miles for independent shops, sometimes longer at dealerships.
If one quote is significantly higher than others, ask why. It might be because that shop uses OEM parts instead of aftermarket, or because they've identified additional work. It might also be a sign to shop elsewhere.
Frequently Asked Questions
Can I drive with a bad engine mount?
Yes, but not for long distances or extended periods. A failed mount causes excessive vibration and can damage the radiator, transmission, or other engine components over time. If you notice symptoms, plan the repair within a few weeks rather than months.
Do all engine mounts fail at the same time?
No. Mounts wear at different rates depending on driving habits, engine load, and how much vibration each mount absorbs. One may fail while others have years of life left. However, if your vehicle is old or high-mileage, multiple mounts may be near failure simultaneously.
Is an aftermarket engine mount as good as an OEM part?
Most aftermarket mounts are reliable and cost 20 to 40 percent less than OEM parts. Quality varies by brand. Ask the shop which brands they trust and whether they warranty aftermarket parts the same way they warranty OEM parts.
How long does engine mount replacement take?
A straightforward replacement takes one to three hours depending on which mount and which vehicle. Some mounts require removing other components first, which can extend the job to four or five hours. The shop's estimate should tell you the expected time.
Will replacing engine mounts fix my check engine light?
Not always. A bad mount can trigger a check engine light if the engine movement causes a sensor to misalign or a hose to disconnect. However, the light might indicate a separate problem. Have the code read before assuming the mount is the cause.