ReadyLift suspension lifts raise your truck's ride height by replacing factory springs and shocks with taller components

A ReadyLift suspension lift is an aftermarket system that increases the ground clearance of your truck by installing new springs, shocks, and related hardware. The lift works by extending the distance between your truck's frame and axles, which raises the entire vehicle. ReadyLift is one of several manufacturers that make these systems, and they're designed to fit specific truck models—usually Ford, Chevrolet, GMC, Ram, and Toyota trucks.

The main reason owners install suspension lifts is to fit larger tires and wheels without the tires rubbing against the body or suspension components. A lift also improves approach and departure angles, which matters if you drive on rough terrain or unpaved roads. Some owners straightforward prefer the look of a lifted truck. What matters mechanically is that a suspension lift changes how your truck handles, where its weight sits, and how its steering and braking systems behave.

Key Takeaways

  • ReadyLift lifts come in different heights—typically 2 inches, 2.5 inches, or 3 inches—and each height affects handling, tire clearance, and fuel economy differently.
  • A suspension lift replaces your factory springs and shocks with taller ones, so you're not just adding spacers; you're changing the entire suspension geometry.
  • Lifting your truck can void the factory suspension warranty and may require alignment, brake line extension, and driveshaft modifications depending on lift height.
  • Fuel economy typically drops 1 to 3 miles per gallon after a lift because the truck sits higher and creates more wind resistance.
  • ReadyLift systems are bolt-on installations that don't require welding, but installation usually takes 4 to 8 hours at a shop and costs $1,500 to $3,000 in labor.

How a ReadyLift suspension lift changes your truck's geometry

When you install a suspension lift, you're replacing the factory coil springs or leaf springs with longer ones, and installing longer shock absorbers to match. This raises the ride height, but it also changes the angles at which your suspension components sit relative to the frame and axles. Those angles matter because they affect how your truck steers, how the wheels track, and how the suspension compresses when you hit a bump.

A ReadyLift system is designed to keep those angles as close to factory as possible, which is why it costs more than a straightforward spacer lift. The system includes new springs, shocks, and sometimes upper control arms or track bars that are engineered to work together. Without proper geometry, your truck will pull to one side, the tires will wear unevenly, and the suspension will feel unstable on the highway.

Lift height options and what each one affects

ReadyLift offers lifts in different heights, most commonly 2 inches, 2.5 inches, and 3 inches. A 2-inch lift is the smallest and causes the least change to your truck's handling and geometry. It's enough to fit 33-inch tires on most trucks without rubbing, and it has the smallest impact on fuel economy and steering feel.

A 2.5-inch or 3-inch lift gives you more clearance for larger tires—up to 35 inches or more—but the trade-off is more noticeable. Your truck sits higher, which raises the center of gravity and makes the vehicle slightly less stable in hard cornering. The steering may feel lighter or less responsive. Braking distances can increase slightly because the truck's weight is distributed differently. Fuel economy drops more noticeably, and you may need additional modifications like brake line extensions or driveshaft work.

Taller lifts also change how your truck looks and sits on the road. Some owners like the appearance; others find that a 3-inch lift looks disproportionate without larger wheels to match. ReadyLift publishes fitment guides for each truck model that show which tire sizes work best with each lift height.

What modifications you may need after installing a lift

A suspension lift is not a standalone modification. Depending on the lift height and your truck model, you may need to make other changes for the truck to function properly and safely.

Wheel alignment is mandatory after any lift. Your truck's steering geometry has changed, and the wheels need to be realigned to factory specifications for that new height. Skipping alignment will cause uneven tire wear and poor handling. Expect to pay $150 to $300 for a four-wheel alignment at a shop that has experience with lifted trucks.

Brake line extensions become necessary on lifts of 2.5 inches or more. The factory brake lines are only long enough for the original ride height. When you lift the truck, the lines stretch and can tear, causing brake failure. ReadyLift kits sometimes include extended lines, but if yours doesn't, you'll need to have them fabricated or replaced. This typically costs $200 to $500.

Driveshaft modifications may be needed on 3-inch lifts or higher, especially on four-wheel-drive trucks. The angle between the transmission and rear axle changes when you lift the truck, and the driveshaft may need to be shortened or rebalanced. This is a specialized job that costs $300 to $800.

Speedometer recalibration is sometimes necessary if you install significantly larger tires. Your speedometer reads wheel speed, and larger tires rotate more slowly, which can make your speedometer read low. Some newer trucks have electronic speedometer correction; older ones may need a recalibration tool.

How a lift affects fuel economy, handling, and braking

A suspension lift raises your truck's center of gravity and increases its frontal area, both of which reduce fuel economy. Most owners see a drop of 1 to 3 miles per gallon, depending on lift height and driving habits. Highway driving is affected more than city driving because aerodynamic drag increases at higher speeds. If your truck normally gets 18 mpg, a 3-inch lift might drop that to 15 or 16 mpg.

Handling changes are noticeable but not dangerous if the lift is installed correctly and aligned properly. The truck will feel slightly less stable in hard cornering because the center of gravity is higher. Body roll—the leaning sensation when you turn—increases. On the highway, the truck may feel a bit floatier or less planted, especially in crosswinds. These changes are usually minor on a 2-inch lift and more pronounced on a 3-inch lift.

Braking performance can be affected because the truck's weight distribution changes. The front brakes do most of the work during braking, and lifting the truck shifts weight slightly rearward. Braking distances may increase by a small amount, especially in emergency stops. This is another reason why proper alignment and brake line work are important—they help maintain braking performance.

ReadyLift installation: what to expect and what it costs

ReadyLift systems are designed as bolt-on kits, meaning they don't require welding or cutting. However, installation is not a weekend job for most owners. The work involves removing the wheels, unbolting the factory springs and shocks, installing new ones, and then performing a full wheel alignment. Most shops charge between $1,500 and $3,000 in labor, depending on truck model and lift height. The kit itself costs $800 to $2,000, depending on height and whether it includes shocks.

Installation typically takes 4 to 8 hours. Some shops can do it faster if they have experience with your specific truck model. Before you have the work done, ask the shop whether the price includes alignment, brake line work, and any other modifications your truck will need. Some shops bundle these; others charge separately.

After installation, your truck's factory suspension warranty will be void. The manufacturer will not cover suspension repairs if a lift has been installed. Your vehicle's overall warranty may also be affected depending on your truck's age and the manufacturer's policy. Check your warranty documents or call the dealer before you proceed.

When a suspension lift makes sense and when it doesn't

A suspension lift is worth the cost and complexity if you plan to use your truck off-road, fit significantly larger tires, or want the appearance of a lifted truck and are willing to accept the trade-offs. It's a permanent modification that improves ground clearance and approach angles in a way that a straightforward tire upgrade cannot.

A suspension lift is not necessary if you just want a slightly more aggressive look. A set of larger tires and new wheels can often give you the appearance you want without the cost and complexity of a full lift. It's also not the right choice if you drive mostly on highways and care about fuel economy, because the drop in mpg will be noticeable over time.

If you tow frequently or carry heavy loads, talk to a suspension specialist before lifting. A lift can affect your truck's towing capacity and payload capacity, and you need to understand how those changes affect your specific use case.

Frequently Asked Questions

Will a ReadyLift suspension lift affect my truck's warranty?

Yes. Installing any aftermarket suspension component will void the factory suspension warranty. Depending on your truck's age and the manufacturer, other warranty coverage may also be affected. Contact your dealer before installation to understand what you're giving up.

Can I install a ReadyLift suspension lift myself?

The kit is designed for bolt-on installation, but the work requires removing and reinstalling suspension components, and then performing a full wheel alignment. Most owners need a shop with a lift and alignment equipment. If you have experience with suspension work, you can do it yourself, but alignment must be done professionally.

How much will my fuel economy drop after a lift?

Most owners see a drop of 1 to 3 miles per gallon, depending on lift height and driving style. A 2-inch lift has minimal impact; a 3-inch lift typically causes a more noticeable drop. Highway driving is affected more than city driving.

Do I need to replace my tires after a lift?

Not necessarily. A 2-inch lift allows you to fit slightly larger tires without rubbing. A 2.5-inch or 3-inch lift gives you room for much larger tires. Many owners install a lift specifically to fit bigger tires, but you can install a lift without changing tires if you just want the extra clearance.

What's the difference between a suspension lift and a body lift?

A suspension lift replaces springs and shocks to raise the truck's entire suspension. A body lift uses spacers to raise only the truck's body, leaving the suspension at factory height. A body lift is cheaper and simpler but doesn't improve ground clearance or approach angles the way a suspension lift does.