What replacement awning fabric is and why it matters
Replacement awning fabric is the canvas or vinyl material that stretches across your RV's retractable awning frame. Over time—usually three to five years depending on sun exposure, weather, and how often you deploy it—the fabric fades, cracks, tears, or loses its water resistance. When that happens, you have two choices: replace just the fabric by removing it from the existing roller tube and frame, or replace the entire awning assembly.
Replacing only the fabric is cheaper and faster than a full awning replacement, but it requires the right measurements, material choice, and either professional installation or the skill to do it yourself. The fabric you choose affects how well your awning sheds water, resists UV damage, and how long it will last before you need to do this again.
Key Takeaways
- Awning fabric comes in acrylic, vinyl, and solution-dyed acrylic, each with different costs, durability, and maintenance needs.
- You need your RV's exact awning model number and the width and length of the fabric to order a replacement that will fit your frame.
- Professional installation at an RV service center takes one to two days and costs more upfront but guarantees the fabric is tensioned correctly.
- DIY fabric replacement is possible if you have basic tools and mechanical confidence, but improper installation can cause water pooling and premature wear.
- Acrylic fabric typically lasts longer than vinyl but costs more; vinyl is cheaper but may need replacement sooner in harsh climates.
Types of awning fabric and what each one costs
The three main fabric types differ in material, lifespan, and price. Acrylic fabric is woven from acrylic fibers and is the most common choice for RV awnings. It resists UV damage better than vinyl, sheds water well, and typically lasts five to seven years. Acrylic fabric costs between $400 and $800 for a standard 15-foot awning, depending on width and brand.
Vinyl fabric is plastic-based and cheaper upfront—usually $250 to $500 for the same size—but degrades faster in direct sunlight and can become brittle in cold climates. It is a good choice if you park in shade most of the time or live in a cooler region. Solution-dyed acrylic is acrylic with color dyed into the fibers rather than applied to the surface, making it more fade-resistant than standard acrylic. It costs $600 to $1,000 but can last seven to ten years, making it the longest-lasting option.
All three types come in solid colors and stripes. Darker colors absorb more heat and fade faster; lighter colors stay cooler but show dirt more easily. Stripes are a middle ground and are popular because they hide stains and offer a classic RV look.
How to find your awning size and model number
Before you order fabric, you need three pieces of information: your RV's awning brand and model, the width of the awning when fully extended, and the length of the fabric roll. The brand and model are usually printed on a label on the awning arm or roller tube itself. Common brands include Dometic, Carefree, A&E, and Lippert.
Measure the width by extending the awning fully and measuring from the outer edge of one arm to the outer edge of the other. Measure the length by looking at how far the fabric extends when fully deployed. If you cannot find the label or do not want to measure, contact your RV's manufacturer with your RV's model year and floor plan—they can tell you what awning was installed at the factory.
Once you have this information, call an RV parts supplier or visit their website and search by brand and model. They will confirm the exact fabric size and show you what colors and materials are in stock. Do not guess at the size; fabric that is even two inches too wide or too narrow will not fit properly and will either bunch up or leave gaps.
Professional installation versus DIY replacement
Professional installation is the safest choice if you have never done this work. An RV service center will remove the old fabric, inspect the roller tube and frame for damage, install the new fabric, and tension it correctly so water runs off and the fabric does not sag. This usually takes one to two days and costs $300 to $600 in labor, on top of the fabric cost. The advantage is that the work is may provide; if the fabric leaks or sags, the shop will fix it.
DIY replacement is possible if you are comfortable working at height and have basic hand tools: a drill, screwdrivers, a utility knife, and a helper. The process involves removing the awning arms from the RV, unbolting the old fabric from the roller tube, sliding the new fabric onto the tube, reattaching the arms, and adjusting the tension so the fabric is tight but not overstretched. Improper tension is the most common mistake; too loose and water pools in the middle, too tight and the fabric tears at the attachment points.
If you choose DIY, watch a video specific to your awning brand first. Dometic, Carefree, and A&E all publish installation guides on their websites. You will also need to buy a fabric installation kit for your brand, which includes the correct fasteners and sometimes a tensioning tool. These kits cost $30 to $80.
What to do if your awning frame is damaged
While you have the awning apart, inspect the roller tube, arms, and brackets for rust, cracks, or bent metal. Surface rust can be cleaned with a wire brush and treated with rust converter, but deep rust or structural damage means the frame needs replacement. A bent arm or cracked bracket cannot be safely repaired and must be replaced as a unit.
If the frame is damaged, you have two options: replace just the damaged part (an arm or bracket costs $100 to $300) or replace the entire awning assembly. A full replacement runs $1,500 to $3,500 depending on size and brand, but it gives you a new frame, new motor if yours is motorized, and new fabric all at once. For RVs over ten years old with heavy rust, a full replacement is often more cost-effective than piecemeal repairs.
Ask the service center to inspect the frame before you commit to fabric replacement. If they find damage, get a quote for both options—fabric-only and full replacement—so you can decide which makes sense for your RV's age and condition.
Maintenance after installation to extend fabric life
New awning fabric will last longer if you care for it properly. Deploy the awning regularly—leaving it rolled up for months at a time can trap moisture and cause mildew. Retract it when it rains or if wind gusts exceed 20 miles per hour; fabric can tear if the awning flaps in the wind, and water can pool if the fabric is not tensioned correctly.
Clean the fabric twice a year with a soft brush and mild soap, then rinse with a garden hose. Do not use a pressure washer; the force can damage the fibers and force water into seams. If you see mildew spots, spray them with a 50/50 mix of white vinegar and water, let it sit for ten minutes, then rinse. Avoid bleach, which can fade acrylic and weaken vinyl.
If a small tear appears, patch it with a vinyl repair kit (available at RV supply stores for $10 to $20) before it spreads. For tears larger than a few inches, contact an RV service center; a large tear usually means the fabric needs replacement sooner rather than later.
Frequently Asked Questions
Can I install new fabric on an awning that is motorized?
Yes, the process is the same whether the awning is manual or motorized. The motor and switch stay in place; you are only replacing the fabric. If the motor is not working, have it serviced before you install new fabric, because you will need to test the awning after installation to make sure it deploys and retracts smoothly.
What if the new fabric does not fit the roller tube?
This usually means the size was ordered incorrectly. Contact the supplier when ready with your awning model number and measurements. Most will exchange it for the correct size at no charge if you catch the error before installation. Once the fabric is installed, exchanges are usually not possible.
How do I know if my awning fabric needs replacement?
Replace the fabric if you see cracks, tears, or permanent stains; if water no longer beads up on the surface; if the fabric sags in the middle when deployed; or if it has visible mildew that does not clean off. Fading alone is not a reason to replace it unless the fabric is also losing water resistance.
Can I use a different brand of fabric than the original awning?
Yes, as long as the width and length match your roller tube and frame. Universal replacement fabrics are sold by RV parts suppliers and will fit most standard awnings. Check the product description to confirm it is compatible with your awning brand before ordering.
What is the difference between a full awning replacement and fabric-only replacement?
Fabric-only replacement removes and reinstalls the existing frame and arms; full replacement includes a new frame, arms, roller tube, and fabric. Full replacement costs more but is necessary if the frame is damaged or if the awning is very old and multiple parts are failing.