Rigging certification is a credential that shows a person has been trained to safely find and move vehicles using chains, straps, and other equipment during towing or recovery operations.
If you own a vehicle that needs to be towed or recovered—whether after an accident, breakdown, or because it's being transported—the person handling your car should have this certification. Rigging certification is not a legal requirement in most states for basic towing, but it is the industry standard for safe practice. A certified rigger knows how to attach tow chains or straps to the right points on your vehicle, calculate weight distribution, and prevent damage during the lift or pull.
The certification comes from training programs run by towing associations, trade schools, and equipment manufacturers. The most common credential is through the Towing and Recovery Professionals of America (TRPA) or similar regional bodies. Training covers the physics of vehicle weight, the strength ratings of different cables and chains, how to identify tow points on various vehicle types, and what can go wrong if rigging is done incorrectly.
Key Takeaways
- Rigging certification shows a tow operator has been trained to safely attach your vehicle using the correct equipment and anchor points.
- A certified rigger understands weight distribution and equipment limits, which prevents damage to your car and injury to people on the scene.
- Certification is not legally required in most states but is the standard practice at professional towing companies and recovery services.
- You can ask a towing company whether their operators hold current certification before you call them for service.
- Improper rigging can bend frames, tear suspension components, and cause thousands of dollars in damage beyond the original problem.
Why rigging matters to your vehicle's safety
When a vehicle is lifted or towed, the forces involved are much larger than the vehicle's own weight. A 3,000-pound car being pulled at an angle can create stress points that exceed 5,000 or 6,000 pounds in certain spots. If the rigging is wrong—if chains are attached to bumpers instead of frame points, or if weight is distributed unevenly—the vehicle can be bent, torn, or broken in ways that are expensive and sometimes irreversible.
A certified rigger knows where the tow points are on your specific vehicle. These are reinforced spots on the frame designed to handle the stress of being pulled. They are not the bumper, the axle, or the suspension. Attaching to the wrong spot can tear the frame or rip components loose. The rigger also knows how to use the right type of equipment—whether that means chains, straps, or specialized lifting gear—and how to calculate whether the equipment is strong enough for the job.
Beyond damage to your car, improper rigging creates safety hazards. A chain that breaks under load can whip back and injure people nearby. A vehicle that shifts during transport can roll or jackknife. A load that is not balanced can cause the tow truck itself to tip. Certification training covers these scenarios so the rigger can spot and prevent them.
What rigging certification training covers
Rigging certification programs typically run between one and five days, depending on the depth of training. Basic courses cover the fundamentals; advanced courses include specialized recovery techniques for vehicles in ditches, upside down, or in water.
The training includes classroom instruction on the physics of load, the specifications of different chains and straps (their breaking strength, safe working load, and when they wear out), and how to inspect equipment before use. Trainees learn to identify tow points on common vehicle types—sedans, SUVs, trucks, and commercial vehicles—and practice attaching rigging under supervision. They also learn to recognize when a job is beyond safe rigging and requires a different approach, such as a rotator truck or a heavy wrecker.
Many programs include a written test and a practical demonstration. The person must show they can safely rig a vehicle and explain their choices to an instructor. Once certified, the credential is usually valid for two to three years, after which the person may need to renew through refresher training or a new course.
How to check if a towing company's operators are certified
Before you call a towing service, you can ask whether their operators hold rigging certification. A professional company will be able to tell you yes or no, and may be able to provide the name of the certifying body (TRPA, AAA, a state towing association, or a manufacturer program). Some companies display their certification on their website or vehicles.
If you are in an emergency and need a tow when ready, you may not have time to verify credentials beforehand. In that case, you can ask the operator when they arrive: "Are you rigging certified?" A trained operator will answer directly. If they seem unsure or defensive, you have the right to ask for a different operator or a different company, even if you have already called them out.
If you are arranging a tow in advance—for example, because your car is being transported across the country or recovered from a difficult location—take the time to call a few companies and ask about their training. The cost difference between a certified and uncertified operator is usually small, and the protection to your vehicle is significant.
The difference between basic towing and rigging recovery
Basic towing—hitching your car to a tow truck and driving it to a repair shop—does not always require rigging certification. Many states allow anyone with a towing license to perform this service. However, the moment the job becomes more complex—the car is in a ditch, on its side, partially in water, or needs to be lifted rather than dragged—rigging certification becomes essential.
Recovery operations are the jobs where rigging skill prevents catastrophic damage. If your car has rolled into a ravine, a certified rigger will know how to calculate the angle of pull, use multiple anchor points, and manage the weight so the vehicle comes out without being torn apart. If your car is stuck in mud or snow at an angle, the rigger will know whether to pull straight, at an angle, or to use a rotator to right the vehicle first. These decisions require training and experience.
When you call for recovery, ask specifically whether the company sends a certified rigger. Some companies have one or two certified operators and will dispatch them for complex jobs but send uncertified drivers for straightforward calls. Knowing this in advance helps you understand what you are paying for and what level of care your vehicle will receive.
What happens if rigging goes wrong
Improper rigging can cause damage that costs thousands of dollars to repair and may not be covered by your insurance. Common problems include bent frames (which affect how the car drives and can make it unsafe), torn suspension components, damaged bumpers and body panels, and broken axles or driveshafts.
If a towing company damages your vehicle through improper rigging, you may be able to file a claim against their liability insurance. However, proving that the damage was caused by the tow—and not by the original accident or breakdown—can be difficult. It is easier to prevent the damage by using a certified rigger in the first place.
Some towing companies carry cargo liability insurance that covers damage to vehicles they tow. When you call for a tow, you can ask whether they carry this insurance and what it covers. A company that is confident in its rigging practices will have this coverage and will be happy to discuss it.
Frequently Asked Questions
Is rigging certification required by law?
No, rigging certification is not legally required in most states for basic towing. However, it is the industry standard and is required by many professional towing associations and insurance companies. Some states or municipalities may have their own requirements, so check with your local towing board if you want to know the rules in your area.
Can I tow my own vehicle if I am not certified?
You can tow your own vehicle using your own equipment if you own both the vehicle and the tow vehicle, and if you follow local traffic laws. However, if you are using a commercial tow truck or a professional service, the operator should be certified. If you are rigging your own vehicle at home, the same safety principles explore—use the correct tow points, appropriate equipment, and proper technique.
How long does rigging certification last?
Most rigging certifications are valid for two to three years. After that, the operator may need to complete a refresher course or a new full certification to maintain their credential. Some certifying bodies require annual continuing education instead of a full renewal.
What should I do if I think a tow operator is not rigging my car correctly?
Stop the tow and ask the operator to explain what they are doing and why. If you are not satisfied with the answer, you have the right to refuse the service and call a different company. Do not let your car be towed if you believe it is being rigged unsafely. Taking photos of how the vehicle is attached can also help if you need to file a damage claim later.
Does my insurance cover damage from improper towing?
Most auto insurance policies do not cover damage caused by a towing company's negligence. However, the towing company's liability insurance should cover it. If damage occurs, report it to the towing company when ready and ask about their insurance claim process. You may also need to file a complaint with your state's towing board or consumer protection agency.