Rivian Highway information is a driver-information feature, not full self-driving, and it can fail for several common reasons

Rivian Highway information is a hands-on driver aid that helps with steering, acceleration, and braking on highways. It requires you to keep your hands on the wheel and stay alert. When it stops working mid-drive or won't turn on, the cause is usually a camera blockage, a software glitch, a calibration issue, or a sensor malfunction. Most problems can be fixed at home; some require a service appointment.

The feature relies on multiple cameras and sensors mounted on your Rivian to read lane markings, detect other vehicles, and track road conditions. If any of these components are dirty, misaligned, or failing, Highway information will disable itself as a safety measure. Understanding what went wrong and what you can do about it will save you time and money.

Key Takeaways

  • Highway information disables itself when it detects a problem with cameras, sensors, or calibration—this is intentional and safe.
  • Cleaning the front cameras and checking for software updates are the first troubleshooting steps you can do yourself.
  • If Highway information worked before and suddenly stopped, restart the vehicle and check the driver-information settings in your infotainment menu.
  • Sensor calibration issues and hardware failures require a Rivian service center and cannot be fixed at home.
  • A service appointment typically takes one to three days, and Rivian may cover the repair under warranty if the vehicle is less than three years old.

Why Highway information turns off on its own

Highway information disables itself when the system detects that it cannot safely operate. This is not a malfunction—it is a safety feature. The most common triggers are dirty or obstructed cameras, a software bug, a failed sensor, or a misalignment of the camera system after a collision or service.

You will see a message on your instrument cluster or infotainment screen saying something like "Highway information unavailable" or "Camera blocked." The feature will not re-enable until the underlying problem is resolved. If you see this message, do not force the system back on; instead, identify what caused it to shut down.

Camera and sensor cleaning you can do yourself

The front-facing cameras on your Rivian are mounted behind the windshield and on the front bumper. Dirt, condensation, snow, or mud on these lenses will cause Highway information to fail. Before scheduling a service appointment, clean these areas with a soft, lint-free cloth and mild glass cleaner.

For the windshield-mounted camera, spray cleaner on the cloth (not directly on the camera) and wipe gently. For the bumper-mounted sensors, use the same method. Avoid using abrasive materials or excessive pressure, which can scratch the lens coating. After cleaning, restart the vehicle and try Highway information again.

If the cameras are clean and Highway information still will not turn on, move to the next step. Do not assume the system is broken; sensor calibration and software issues are equally common.

Checking for software updates and restarting the system

Rivian regularly releases software updates that fix driver-information bugs. An outdated software version can cause Highway information to malfunction or disable itself. Check for updates by going to Controls > Service > Software Update on your infotainment screen while the vehicle is parked and plugged in.

If an update is available, install it. This can take 15 to 45 minutes depending on the size of the update. Do not drive or turn off the vehicle during an update. After the update completes, restart the vehicle and check whether Highway information is working again.

If no update is available or the update does not fix the problem, try a full system restart. Press and hold the brake pedal, then press and hold the two scroll wheels on the steering wheel for 10 seconds until the screen goes black. Wait 30 seconds, then release and restart the vehicle. This clears temporary software glitches that can disable Highway information.

Checking Highway information settings in your vehicle menu

Highway information can be turned off manually in your driver-information settings. If someone else drove your vehicle or you changed the settings by accident, the feature may be disabled rather than broken. Check by going to Controls > Driver information > Highway information and confirm the toggle is set to On.

Some Rivian models also have a setting for Camera Calibration Status in the same menu. If this shows "Calibration in Progress" or "Calibration Required," the system is recalibrating itself after a software update or sensor adjustment. This process can take 20 to 100 miles of highway driving. Do not schedule a service appointment until calibration is complete.

When to schedule a service appointment

If cleaning the cameras, updating software, and restarting the system do not restore Highway information, a hardware or calibration issue is likely. Schedule a service appointment through the Rivian app or by calling your local Rivian service center. When you book, mention that Highway information is unavailable and describe when it stopped working (suddenly, after an update, after a collision, etc.).

Bring your vehicle to the appointment with the Highway information error message still visible if possible. Technicians will run a diagnostic scan to identify which sensor or camera has failed and whether recalibration is needed. Most appointments take one to three days. If your vehicle is within the warranty period (typically three years or 36,000 miles), the repair should be covered at no cost.

If your vehicle is out of warranty, ask for a repair estimate before work begins. Camera replacement typically costs $400 to $800; sensor recalibration costs $150 to $300. Some issues, like a failed radar module, may cost more.

What happens after a collision or service

If Highway information stopped working after you had the vehicle serviced (windshield replacement, bumper repair, or other work), the cameras may have been moved during the repair. Rivian service centers should recalibrate the camera system after any work that touches the front of the vehicle, but independent shops sometimes miss this step.

If you had work done elsewhere, contact that shop and ask whether they recalibrated the driver-information cameras. If they did not, you will need to have Rivian do it. Similarly, if Highway information failed after a minor collision, the impact may have shifted a camera or sensor out of alignment. A Rivian technician can check this and recalibrate if needed.

Frequently Asked Questions

Can I drive without Highway information while I wait for a service appointment?

Yes. Highway information is a convenience feature, not a requirement for safe driving. You can drive normally using the steering wheel, pedals, and your own attention. The feature will remain unavailable until the underlying problem is fixed, but your vehicle is safe to operate.

Will Highway information turn back on by itself after a software update?

Usually yes, but not always. After a software update, the system may need to recalibrate by driving on the highway for 20 to 100 miles. Check your driver-information settings to confirm Highway information is enabled, and give the calibration process time to complete before assuming it is broken.

What is the difference between Highway information being unavailable and it being turned off?

If you turned it off manually, the button or menu toggle will show it as off and you can turn it back on when ready. If it is unavailable, the system detected a problem and disabled itself for safety. You cannot turn it back on until that problem is resolved.

Does Rivian cover Highway information repairs under warranty?

Yes, if your vehicle is within the warranty period (typically three years or 36,000 miles from the purchase date). Bring your vehicle to a Rivian service center with proof of purchase or your vehicle registration. Out-of-warranty repairs are your responsibility, though you can request a repair estimate first.

Can I clean the cameras myself, or do I need a technician?

You can clean the visible lenses with a soft cloth and mild glass cleaner. However, if the cameras are mounted inside the windshield or bumper, or if cleaning does not restore the feature, a technician will need to inspect and possibly recalibrate the system.