What a Rivian reset does and when you need one
A Rivian reset is a restart of your vehicle's computer systems and infotainment display. It clears temporary software glitches, fixes unresponsive touchscreens, resolves Bluetooth connection problems, and can stop warning lights that appeared after a minor electrical event. A reset does not erase your saved settings, vehicle data, or ownership information — it straightforward restarts the systems the way restarting your phone would.
You might need a reset if your touchscreen freezes, the climate control stops responding to inputs, the vehicle won't recognize your phone for calls or music, or a warning light stays on after the condition that triggered it has passed. A reset is also the first troubleshooting step Rivian support recommends before scheduling service for software-related issues.
Resets are free, take a few minutes, and can be done in your driveway. They are different from a factory reset, which erases everything and requires your owner credentials to restore — that is a step you would only take if instructed by Rivian support or before selling the vehicle.
Key Takeaways
- A soft reset restarts your Rivian's infotainment and vehicle systems without erasing any of your saved data or settings.
- The most common reset method is holding the two scroll wheels on the steering wheel for 10 to 15 seconds until the screen goes black.
- If the scroll wheel reset does not work, you can also power down the vehicle, wait 30 seconds, and power it back on.
- A reset fixes most touchscreen freezes, Bluetooth problems, and lingering warning lights caused by temporary software glitches.
- If a reset does not solve the problem, contact Rivian support or your service center before attempting a factory reset.
The scroll wheel reset method
The fastest way to reset a Rivian is using the two scroll wheels built into your steering wheel. Locate the left and right scroll wheels — these are the small wheels on either side of the steering wheel that you normally use to navigate menus and adjust volume.
Press and hold both scroll wheels at the same time. Keep holding them for 10 to 15 seconds. The infotainment screen will go black, and you may see a Rivian logo or loading animation. Release the wheels once the screen goes dark. The system will restart, and you should see the home screen reappear within 30 seconds.
During the restart, the vehicle remains safely parked — this reset does not affect the engine, brakes, or any safety systems. You can perform this reset while parked in your driveway, at a charging station, or anywhere else the vehicle is stationary.
The power cycle reset if scroll wheels do not work
If the scroll wheel method does not work or your Rivian model does not have scroll wheels on the steering wheel, you can perform a power cycle reset instead. This method works on all Rivian models and is equally effective.
First, shift the vehicle into Park if it is not already. Turn off the engine completely — press the power button on the dashboard or use the key fob to power down. Wait at least 30 seconds. This pause allows the vehicle's systems to fully shut down.
After 30 seconds, press the power button again or use the key fob to turn the vehicle back on. The infotainment system will restart, and all systems will reinitialize. This process takes about one to two minutes from power-off to full restart.
What a reset will and will not fix
A reset will fix most software-related problems: frozen or unresponsive touchscreens, Bluetooth pairing issues, climate control that does not respond to button presses, and warning lights that remain on after the triggering event has passed. It will also clear temporary error messages and restore normal performance if the system is running slowly.
A reset will not fix hardware failures, such as a broken touchscreen, a malfunctioning speaker, or a faulty climate control compressor. It will not fix problems caused by low battery charge, a loose charging cable, or issues with the vehicle's electrical connections. If the problem persists after a reset, the issue is likely hardware-related and requires service.
A reset also will not fix problems related to your Rivian account, app connectivity, or over-the-air software updates. If you cannot connect to the Rivian app or your vehicle is stuck on an update, contact Rivian support directly — a reset may make those problems worse.
When to contact Rivian support instead of resetting
Do not attempt a reset if your vehicle is actively updating software or if the touchscreen shows an update in progress. Wait for the update to finish before resetting. If the vehicle is stuck on an update screen, contact Rivian support before doing anything else.
Also contact support directly if you see warning lights related to the battery, high-voltage system, brakes, or steering — these are safety-critical systems and should not be troubleshot with a reset. The same applies if the vehicle will not start, will not shift out of Park, or shows any warning that affects driving safety.
If a reset does not fix the problem after two attempts, or if the problem returns within a few days, schedule service with a Rivian service center. Repeated issues usually point to a deeper software problem or a hardware fault that requires diagnostic tools.
Difference between a soft reset and a factory reset
A soft reset (the scroll wheel or power cycle method) restarts the infotainment and vehicle systems but keeps all your saved data. Your driver profiles, seat and mirror positions, saved addresses, phone pairings, and vehicle settings remain exactly as they were. A soft reset is what you do for everyday troubleshooting.
A factory reset erases everything and returns the vehicle to its original state, as if it just left the factory. Your driver profiles, saved locations, Bluetooth pairings, and all customized settings are deleted. You will need to sign back into your Rivian account and re-pair your phone. A factory reset should only be done if Rivian support instructs you to, or if you are preparing to sell or transfer the vehicle.
To perform a factory reset, you typically go to Settings > System > Reset on the touchscreen and follow the prompts. The process requires your Rivian account credentials and takes 10 to 15 minutes. Do not attempt a factory reset unless you are certain it is necessary.
Preventing the need for frequent resets
You can reduce how often you need to reset your Rivian by keeping the software up to date. When your vehicle notifies you of an available update, install it as soon as you can — updates often fix the bugs that cause freezes and unresponsive screens. Updates happen over the air and require the vehicle to be plugged in and parked.
Also keep your phone's Bluetooth settings clean by removing old or unused pairings from the vehicle's system. Go to Settings > Bluetooth on the touchscreen and delete any phones you no longer use. This prevents the vehicle from trying to connect to old devices and causing connection conflicts.
If you notice the touchscreen is slow or laggy, clear the cache by going to Settings > System > Clear Cache. This removes temporary files without erasing your data and can improve performance without a full reset.
Frequently Asked Questions
Will a reset erase my saved addresses and driver profiles?
No. A soft reset (scroll wheel or power cycle) keeps all your saved data, settings, and profiles. Only a factory reset erases that information, and a factory reset requires you to confirm your Rivian account credentials before it proceeds.
How long does a Rivian reset take?
A soft reset takes 30 seconds to two minutes from start to finish. The scroll wheel method is usually faster. A factory reset takes 10 to 15 minutes and requires you to stay in the vehicle while it completes.
Can I reset my Rivian while driving?
You should not attempt a reset while driving. Pull over safely, shift into Park, and then perform the reset. The vehicle is safe to reset while parked anywhere — your driveway, a parking lot, or a charging station.
What if the reset does not fix the problem?
If the problem persists after one or two resets, contact Rivian support or schedule service at a Rivian service center. Repeated issues usually indicate a hardware problem or a deeper software fault that requires diagnostic equipment.
Do I need to be connected to Wi-Fi or cellular to reset my Rivian?
No. A soft reset works completely offline and does not require any network connection. You can reset your vehicle in areas with no cell service or Wi-Fi.