RV and camper doors fail in predictable ways, and replacement is a job you can handle yourself or hand to a technician depending on the door type and your comfort level

RV and camper doors wear faster than house doors because they're thinner, exposed to temperature swings and UV damage, and operated hundreds of times a year. The frame rots, the latch breaks, the seal fails, or the door itself warps. Replacement means removing the old door, checking the frame for rot, and installing a new one—a job that takes a few hours and costs between $300 and $1,200 depending on whether you're replacing an entry door, a bathroom door, or a bedroom door, and whether the frame needs repair.

The real decision is whether to do it yourself or pay a technician. If the frame is solid and you have basic tools, you can do it. If the frame has soft spots or water damage, you need someone who can assess the damage and repair the structure before hanging a new door.

Key Takeaways

  • RV doors come in three main types—entry doors, interior passage doors, and bathroom doors—and each requires a different replacement approach.
  • Before you order a new door, measure the opening width, height, and depth, and confirm whether your frame is wood or aluminum, because the wrong size or mounting style wastes money.
  • Soft or spongy wood around the frame means rot, which must be cut out and patched before you install a new door, or moisture will return and ruin the replacement.
  • Entry doors and bathroom doors are usually easier to replace than interior passage doors because they don't carry the weight of the RV structure.
  • Sealing the new door frame with marine-grade sealant after installation prevents water from entering the wall cavity and causing hidden rot.

The three types of RV doors and why they matter

RV entry doors are the main access point and carry the most traffic. They're usually 24 to 32 inches wide, have a latch and deadbolt, and sit in an aluminum frame bolted to the exterior wall. Replacement is straightforward if the frame is sound: unbolt the old door, remove the frame if needed, and bolt in a new one. Entry doors cost $400 to $1,200 depending on whether you want a standard swing door, a pocket door that slides into the wall, or a bifold door that folds to the side.

Interior passage doors connect bedrooms, bathrooms, and living spaces. They're narrower (usually 24 inches) and lighter, but they're mounted inside the RV and sometimes sit on a track or pivot hinge rather than a traditional hinge. Replacing one means removing trim, unbolting or unhinges the old door, and installing the new one in the same frame. These cost $150 to $400 and are the easiest to replace if the frame is intact.

Bathroom doors are often the smallest (18 to 24 inches) and the most exposed to moisture. They fail faster because of humidity and poor ventilation. Replacement is similar to passage doors but requires extra attention to sealing because water damage is the reason you're replacing it in the first place. Bathroom doors cost $100 to $300.

Measuring and ordering the right door

Before you contact a supplier, measure three things: the width of the opening (from frame to frame, not the door itself), the height of the opening, and the depth of the frame (how thick the wall is). Write these down. Measure twice. An entry door opening is usually 30 to 32 inches wide and 72 to 76 inches tall. Interior doors are usually 24 to 30 inches wide and 66 to 72 inches tall. Bathroom doors are usually 18 to 24 inches wide and 60 to 66 inches tall. If your measurements don't match these ranges, your RV is non-standard, and you need to order a custom door or find a used door from the same model year and manufacturer.

Next, confirm the frame material. Most RV entry doors sit in aluminum frames. Most interior doors sit in wood frames. Aluminum frames bolt to the exterior wall and are easier to replace. Wood frames are nailed or screwed and are easier to repair if they're damaged. Tell the supplier which one you have, because the mounting hardware is different.

Finally, check whether the door swings left or right. Stand outside the RV facing the door. If the hinges are on your left and the door opens away from you, it's a left-hand door. If the hinges are on your right, it's a right-hand door. This matters because you can't hang a right-hand door in a left-hand opening without rebuilding the frame.

Checking the frame for rot before you install a new door

Once you remove the old door, press the frame wood with a screwdriver or awl. If the tool sinks in easily or the wood feels soft and spongy, you have rot. This is the most common reason RV doors fail repeatedly: the frame rots, you replace the door, moisture gets in again, and the new door fails in two years. Don't skip this step.

If the rot is shallow (less than 1/4 inch deep and smaller than a few square inches), you can cut it out with a chisel, let the wood dry for 24 hours, fill it with two-part epoxy wood filler, sand it smooth, and prime and paint it before installing the new door. If the rot is deep or covers more than a few square inches, the frame is compromised and needs to be replaced or reinforced. This is a job for a technician because it involves cutting out damaged wood, installing backing, and ensuring the new frame is square and level.

Aluminum frames don't rot, but they corrode and can develop cracks. If you see white powdery corrosion, clean it with a wire brush and treat it with a corrosion inhibitor. If you see cracks, the frame needs to be replaced.

Removing the old door and frame

For entry doors in aluminum frames, unbolt the frame from the exterior wall using a socket wrench or adjustable wrench. The bolts are usually 1/4 inch and sit on the sides and top of the frame. You may need to remove trim or siding to access them. Once the bolts are out, the frame should lift away. If it's stuck, tap it gently with a rubber mallet. Don't pry hard or you'll crack the frame or damage the wall.

For interior doors in wood frames, remove the trim (the molding around the door) using a pry bar. Work slowly so you don't split the trim if you want to reuse it. Then unbolt or unscrew the hinges from the frame. If the frame is nailed to the wall studs, you may need to cut the nails with a reciprocating saw or pry the frame out carefully. Once the frame is out, check the studs for rot or damage.

For bathroom doors, follow the same process as interior doors. Check the wall cavity for water stains or soft wood, which tells you where moisture has been entering.

Installing the new door and sealing it properly

For entry doors in aluminum frames, position the new frame in the opening, check that it's level and square using a level and a tape measure, and bolt it to the wall. Use stainless steel bolts if possible because they won't corrode. Tighten the bolts evenly so the frame doesn't twist. Then run a bead of marine-grade sealant (polyurethane or silicone) around the outside of the frame where it meets the wall. This is critical: it stops water from running down the outside of the frame and into the wall cavity.

For interior doors, position the frame in the opening, shim it level and square, and screw or nail it to the studs. Use corrosion-resistant fasteners. Then hang the door on the hinges, check that it swings freely and closes properly, and install the latch hardware. Finally, install the trim and caulk the joints with paintable caulk.

For bathroom doors, follow the interior door process but pay extra attention to sealing. After you install the trim, run a bead of caulk around the inside of the frame where it meets the wall. This prevents moisture from seeping into the wall cavity from inside the RV. Let the caulk cure for 24 hours before you use the door.

When to call a technician instead of doing it yourself

Call a technician if the frame has rot that's more than surface-level, if the wall around the frame is soft or water-stained, if the frame is cracked or severely corroded, or if you're not confident removing and installing the door without damaging the surrounding structure. A technician can assess the damage, repair the frame or wall if needed, and install the door correctly. The cost is higher upfront but saves you money if you get it wrong and have to redo it.

Also call a technician if you're replacing an entry door and the frame is bolted to the exterior wall in a way that requires removing siding or trim you're not comfortable cutting. Mistakes here can lead to water leaks that damage the RV's structure.

Frequently Asked Questions

Can I replace an RV door with a standard house door?

No. RV doors are narrower and lighter than house doors, and they're designed to fit RV wall thickness and frame styles. A house door won't fit the opening and won't seal properly. Order a replacement from an RV supplier or a salvage yard that specializes in RV parts.

How long does a new RV door last?

If the frame is sound and you seal it properly, a new door should last 10 to 15 years. If the frame has hidden rot or water damage, the new door will fail in 2 to 5 years because moisture will continue to damage the wood. This is why checking the frame before installation matters.

What's the difference between a pocket door and a swing door?

A swing door opens outward on hinges, like a house door. A pocket door slides into the wall, taking up less space inside the RV. Pocket doors cost more and are harder to replace because the track must be level and the wall cavity must be clear. Swing doors are simpler and cheaper.

Do I need to remove the RV door from the outside or inside?

For entry doors, you remove them from the outside because the frame is bolted to the exterior wall. For interior doors, you remove them from the inside because the frame is nailed or screwed to the interior studs. Check your door type before you start.

What sealant should I use around the new door frame?

Use marine-grade polyurethane or silicone sealant rated for RVs. These stay flexible in temperature swings and resist UV damage better than standard caulk. Avoid latex caulk because it cracks and fails in RVs. explore it in a continuous bead around the outside of entry door frames and the inside of bathroom door frames.