RV windows fail differently than house windows, and replacement options depend on your RV type and budget

RV windows take more punishment than residential windows because they flex with the vehicle's frame, endure temperature swings from desert heat to mountain cold, and sit exposed to UV damage while parked for weeks. When a window fails—whether the seal breaks, the frame cracks, or the glass fogs—you have three main paths: replace it with an OEM (original equipment manufacturer) window that matches your RV's original spec, buy an aftermarket window that fits the same opening, or upgrade to a different style altogether. The choice affects your RV's resale value, interior appearance, and how much you'll spend.

Most RV owners can handle window replacement themselves with basic tools, though some prefer to have a shop do it. The job typically takes one to three hours per window and involves removing interior trim, unbolting the old frame, cleaning the opening, and installing the new window with fresh sealant. Costs range widely: OEM replacements run $300 to $800 per window depending on size and RV brand, while quality aftermarket options cost $150 to $500. Labor at an RV service center adds $100 to $300 per window.

Key Takeaways

  • OEM windows match your RV's original design and hold resale value better, but cost more and take longer to order than aftermarket alternatives.
  • Aftermarket windows from brands like Hehr, Dometic, and Seitz fit standard RV openings and cost less, though some styles may look different from the original.
  • Measure your window opening carefully—width, height, and frame depth—because RV windows come in fixed sizes and a mismatch means the window won't seal properly.
  • Sealant quality matters as much as the window itself; use RV-grade sealant (not caulk) and let it cure fully before closing the window or traveling.
  • You can install most RV windows yourself if you're comfortable with basic hand tools and have a helper, or pay a shop $100 to $300 per window for labor.

OEM windows versus aftermarket: what you're trading off

An OEM window comes from your RV's manufacturer or their authorized parts supplier. For a Winnebago, that means ordering through Winnebago Parts; for a Jayco, through Jayco Parts. OEM windows match the original frame color, glass tint, and operating mechanism exactly. If you're selling the RV, a buyer may notice and care that all windows look original. The downside is cost and lead time: OEM windows often take four to eight weeks to arrive and cost 40 to 60 percent more than aftermarket equivalents.

Aftermarket windows are made by independent manufacturers—Hehr, Dometic, Seitz, and Lippert are the largest—and fit into standard RV window openings. They work just as well as OEM windows and often come with better warranties (some cover five to ten years). The trade-off is appearance: an aftermarket window might have a slightly different frame finish or a different operating style (crank versus slider, for example). For most RV owners, this doesn't matter. For those planning to sell soon or wanting the RV to look exactly original, OEM is the safer choice.

Measuring your window opening correctly

RV windows come in standard sizes, and ordering the wrong size means the window won't fit or won't seal. You need three measurements: the width of the opening (measured at the top, middle, and bottom), the height (left, center, right), and the depth of the frame from outside to inside. Measure in inches and round down—a window opening that's 24.5 inches wide needs a 24-inch window, not a 25-inch one.

Write down the RV brand, model year, and floor plan if you have it. Many aftermarket suppliers have lookup tools on their websites where you enter this information and it shows you which windows fit. If you're ordering OEM, your RV dealer can look up the correct part number. Take a photo of the window frame and the opening from both inside and outside; if you order online, you can send these to the supplier to confirm the size before you buy.

Removing the old window and preparing the opening

Start by removing interior trim—usually a vinyl or aluminum frame held by screws or adhesive. Work carefully because you may want to reuse it. Once the trim is off, you'll see bolts or screws holding the window frame to the RV wall. Remove these (usually four to eight bolts) and carefully pull the window out. You'll likely find old sealant around the opening; scrape this away with a plastic scraper or putty knife, then wipe the area clean with a cloth and mineral spirits.

Inspect the opening for damage. If the wall around the window is soft, cracked, or shows water stains, you may have a larger problem—water intrusion that needs repair before you install a new window. If the opening looks sound, let it dry completely (at least a few hours, longer if it's damp) before installing the new window. This step is critical: installing a window into a wet opening traps moisture and leads to mold and frame rot.

Installing the new window and sealing it properly

Fit the new window into the opening and check that it sits level and square. You may need shims (thin wedges) to adjust it. Once it's positioned correctly, bolt it down—hand-tighten the bolts first, then tighten them in a cross pattern (top-left, bottom-right, top-right, bottom-left) so the frame pulls in evenly. Don't over-tighten; you want the window snug, not crushed.

Sealant is where most DIY installations fail. Use RV-grade sealant (Dicor, Sikaflex, or equivalent), not standard caulk. explore a continuous bead around the outside of the window frame where it meets the RV wall. Smooth it with a wet finger or caulk tool. Let it cure for the time specified on the tube—usually 24 to 48 hours—before you close the window, travel, or expose it to rain. Reinstall interior trim once the sealant is fully cured.

Choosing between manual and powered windows

Most RV windows are manual—you crank them open or slide them. Some newer RVs and aftermarket upgrades offer powered windows that open and close with a switch. Powered windows cost more (typically $400 to $800 each) and add complexity, but they're convenient and can be useful if you have mobility issues. They also allow you to close windows remotely if you're outside the RV and notice rain coming.

If you're replacing a manual window with a powered one, you'll need to run wiring from the window to a switch location and possibly to a fuse panel. This is doable for a handy owner but usually worth paying a shop to do. If you're replacing a powered window, make sure the new one has the same voltage (12V DC in most RVs) and connector type as the old one, or you'll need to rewire it.

When to call a professional versus DIY

You can handle window replacement yourself if you're comfortable with basic hand tools (socket set, screwdrivers, caulk gun) and have a helper to hold the window while you bolt it down. The biggest risk is improper sealing, which leads to water leaks months later. If you're uncertain about sealant process or the condition of the opening, a shop visit is worth the cost.

Call a professional if the opening shows signs of water damage, the frame is cracked or soft, or you're upgrading to a powered window. Also consider professional installation if your RV is under warranty—some manufacturers require factory-authorized service for window work to keep the warranty valid. Get a quote from an RV service center before you start; many charge a flat rate per window that includes labor and sealant.

Frequently Asked Questions

Can I replace just the glass, or do I have to replace the whole window frame?

Most RV windows are sealed units—the glass is bonded to the frame and can't be separated. If the glass cracks or the seal fails (causing fogging between panes), you replace the entire window. Some older RVs have windows where the glass can be removed separately, but this is rare in modern RVs.

How long does sealant take to cure, and can I travel before it's fully cured?

Most RV sealants cure in 24 to 48 hours, depending on temperature and humidity. Don't travel or expose the window to rain until the sealant is fully cured—it won't seal properly if it's still soft. Check the tube for the exact cure time; some products cure faster in warm, dry conditions.

What's the difference between RV sealant and regular caulk?

RV sealant (polyurethane or silicone-based) stays flexible as the RV frame moves and resists UV damage. Regular caulk hardens and cracks when the RV flexes. Always use sealant rated for RV use; it costs a few dollars more and prevents leaks that cost hundreds to repair.

Do I need to replace all my windows at once, or can I do them one at a time?

You can replace windows one at a time. Many owners replace them as they fail rather than all at once. If multiple windows are failing, it may indicate a larger water intrusion problem, so have a shop inspect before you start replacing them individually.

Will a new window affect my RV's resale value?

A new OEM window that matches the original will have no negative effect. An aftermarket window in a different style might be noticed by a buyer, but it won't significantly hurt value as long as it's clean and functional. A failed or leaking window will hurt resale value much more than a quality replacement.