A shotgun caddy 3D print is a custom-made gun rack designed to mount inside your vehicle

A shotgun caddy is a storage bracket that holds a firearm securely in your car, truck, or SUV. The "3D print" version means someone has designed it as a digital file and printed it using a 3D printer rather than buying a factory-made metal rack. These printed caddies typically mount under a seat, along the interior of a door panel, or behind the front seats, depending on the design and your vehicle's layout.

The appeal is customization: a 3D-printed caddy can be tailored to fit your specific vehicle model, your particular shotgun dimensions, and the exact space you want to use. You can also modify the design before printing — adjusting angles, adding padding, or changing mounting points. The cost is usually lower than commercial racks, though you need access to a 3D printer or a printing service.

Before you pursue this route, understand that firearm storage in vehicles is regulated differently by state and sometimes by city. Some jurisdictions require the gun to be unloaded and locked, some prohibit visible firearms in vehicles entirely, and a few have no restrictions. You also need to verify that a 3D-printed plastic mount will safely hold your shotgun without shifting or damage during normal driving.

Key Takeaways

  • A 3D-printed shotgun caddy is a custom bracket you can design and print yourself or have printed by a service, sized to fit your specific vehicle and gun.
  • State and local laws vary widely on how firearms must be stored in vehicles — some require locking and unloading, others ban visible guns entirely — so check your jurisdiction before installing anything.
  • 3D-printed plastic may not provide the same durability or vibration resistance as metal racks, so you should test the mount with an unloaded gun before relying on it.
  • You can find existing designs on sites like Thingiverse or Printables, or hire a designer to create one custom-fitted to your vehicle's interior.

Where to Find 3D Caddy Designs

Open-source design sites like Thingiverse, Printables, and MyMiniFactory host thousands of user-submitted 3D models, including shotgun racks. Search for "shotgun caddy," "gun mount," or "firearm rack" and filter by your vehicle type if available. Most designs are free to read, though some creators ask for a small donation.

The quality and fit of these designs varies. Read the comments and reviews — users often note whether a design actually fits their truck bed, whether the mounting holes align with their vehicle, or whether the plastic flexes too much under load. If a design has been printed and tested by dozens of people, you have real feedback. If it has no comments, you are the test case.

If no existing design matches your needs, you can hire a designer on Fiverr, Etsy, or through local makerspaces. Provide photos of your vehicle's interior, your shotgun's dimensions, and where you want the mount. A custom design typically costs $30 to $150 and takes one to two weeks.

Printing Options and Costs

You have three paths: own a 3D printer, use a local makerspace, or send the file to a printing service. If you already own a printer, material cost is minimal — usually $5 to $15 in plastic filament. If you do not own one, a makerspace membership (typically $50 to $150 per month) gives you access to multiple printers. A single print usually takes two to six hours depending on size and detail.

Online printing services like Shapeways, Sculpteo, or Treatstock will print your file and ship it to you. Costs range from $20 to $80 depending on the design's size, the material you choose (standard plastic is cheapest), and shipping. Turnaround is usually one to two weeks. These services handle the technical side — you just upload the file and choose your material.

Material matters for durability. Standard PLA plastic is cheap and straightforward to print but can warp in hot vehicles or flex under vibration. PETG or ABS plastic is stronger but requires a more capable printer and costs more. For a gun mount, PETG is a reasonable middle ground — it is tougher than PLA and prints on most consumer printers.

Legal Restrictions on Vehicle Gun Storage

Federal law does not regulate how you store a firearm in your own vehicle, but state and local laws do. Some states require firearms in vehicles to be unloaded and locked in a separate container. Others allow loaded firearms if they are not visible. A few states and cities prohibit firearms in vehicles entirely except under specific circumstances (hunting season, licensed security work, etc.).

California, for example, requires firearms in vehicles to be unloaded and locked in a container or equipped with a locking device. New York City bans firearms in vehicles except for licensed security personnel. Texas allows loaded, visible firearms in vehicles without restriction. Your state's fish and wildlife agency or attorney general's office publishes the exact rules — search "[your state] firearm vehicle storage" to find the official text.

Even if your state allows it, your employer or the property owner where you park may have their own rules. If you park at work, check your employee handbook. If you park on someone else's property, ask permission. A 3D-printed caddy does not change the legal requirement — it just makes the storage method easier.

Testing the Mount Before Relying on It

Before you load your shotgun into a 3D-printed caddy and drive, test it with an unloaded gun. Mount the caddy exactly as you plan to use it, place your unloaded shotgun in it, and drive normally for 10 to 15 minutes. Listen and feel for movement, creaking, or flexing. Hit a few bumps or potholes if you can do so safely. Watch whether the gun shifts, whether the mount bends, or whether fasteners loosen.

Plastic mounts can flex more than metal ones, especially in heat. If your vehicle sits in the sun, the plastic may soften slightly and lose rigidity. If the caddy flexes noticeably during normal driving, reinforce it: add internal ribs to the design before reprinting, use thicker walls, or switch to a stronger material like PETG. If fasteners loosen, use threadlocker (a liquid adhesive for bolts) to keep them tight.

If the mount passes the test, you can use it with confidence. If it fails — if the gun moves, the plastic bends too much, or fasteners come loose — do not use it. Either modify the design and reprint, or buy a commercial metal rack instead.

Commercial Alternatives to 3D-Printed Racks

If you want a proven, durable option without the design and printing work, commercial shotgun racks are widely available. Brands like Tuffy, Weatherby, and Browning make vehicle-mounted gun racks in steel or aluminum, priced from $40 to $200 depending on the model and mounting style. These racks are tested, come with installation hardware, and carry a warranty.

The trade-off is customization. A commercial rack fits a range of vehicles but may not fit your specific interior perfectly. You may need to drill holes in your vehicle or use adhesive mounts. A 3D-printed caddy, by contrast, can be designed to fit your exact space without modification to the vehicle itself.

If you are uncertain whether a 3D-printed mount will work for your needs, start with a commercial rack. If you want a custom fit and have access to a printer or printing service, the 3D route is cheaper and more flexible.

Frequently Asked Questions

Will a 3D-printed plastic mount hold a shotgun safely while driving?

It depends on the design, material, and how well it is secured. PETG or ABS plastic is strong enough if the design has adequate wall thickness and proper mounting points. Test it with an unloaded gun first — if it flexes excessively or fasteners loosen, it is not safe. A commercial metal rack is a proven alternative if you are unsure.

Can I modify an existing design to fit my truck?

Yes, if you have basic 3D design skills or access to someone who does. read the file, open it in free software like Fusion 360 or Tinkercad, and adjust dimensions, mounting holes, or angles. If you are not comfortable doing this yourself, a designer can modify an existing design for $20 to $50.

What material should I use for a shotgun caddy?

PETG is the best balance of strength, durability, and printability for a gun mount. It is tougher than PLA and handles heat better. ABS is also strong but requires a more capable printer. Standard PLA is cheapest but may warp in a hot vehicle or flex under vibration.

Do I need a permit to install a gun rack in my vehicle?

No, but you do need to follow your state and local laws on how firearms are stored in vehicles. Some states require the gun to be unloaded and locked. Others have no restrictions. Check your state's fish and wildlife or attorney general website for the exact rules.

How long does it take to print a shotgun caddy?

A typical caddy takes two to six hours to print, depending on size and detail. If you use a printing service, add one to two weeks for shipping. If you own a printer or use a makerspace, you can have it in your hands the same day or within a few days.