What a skid steer track is and why it matters

A skid steer track is the rubber or rubber-and-steel belt that wraps around the wheels of a skid steer loader, allowing it to grip the ground and move forward, backward, and turn. Unlike a wheeled vehicle that steers by turning the front wheels, a skid steer turns by running its left and right tracks at different speeds — the faster track pulls the machine in that direction. This design lets the machine pivot in place and work in tight spaces, which is why skid steers are common on construction sites, farms, and landscaping jobs.

Tracks wear out from friction, impact, and the constant flexing required to move heavy loads over rough terrain. A worn or damaged track loses grip, makes the machine harder to steer, and can fail suddenly under load. Replacing tracks is one of the most common maintenance tasks on skid steers, and understanding the signs of wear helps you avoid downtime and safety problems.

Key Takeaways

  • Skid steer tracks are rubber or rubber-steel belts that grip the ground and allow the machine to turn by running each track at a different speed.
  • Tracks typically last between 1,000 and 2,000 operating hours depending on terrain, load, and maintenance, though this varies widely by model and use.
  • Signs of wear include visible cracks or chunks missing from the rubber, uneven steering, slipping on slopes, and a loud squealing or grinding noise.
  • Replacement involves removing bolts or pins that hold the track assembly in place, sliding the old track off, and installing a new one — a job that usually takes two to four hours per track.
  • Proper inflation, regular cleaning, and avoiding sharp objects extend track life and reduce the cost of premature replacement.

How long skid steer tracks typically last

Track lifespan depends on how hard the machine works and what surface it works on. A skid steer used mostly on pavement or smooth ground may get 2,000 operating hours or more from a single set of tracks. The same machine used daily on rocky terrain, in mud, or carrying maximum load will wear tracks down in 1,000 hours or less. Some operators report getting only 500 to 800 hours in severe conditions.

Operating hours matter more than calendar time. A skid steer that sits idle for months will not wear its tracks, but one that runs eight hours a day on a construction site will wear them much faster. Track brand, machine model, and maintenance habits also affect how long tracks last. Tracks from the original equipment manufacturer (OEM) often cost more but may last longer than aftermarket alternatives.

Signs your skid steer tracks need replacement

The most obvious sign is visible damage: cracks running across the rubber, chunks or chunks missing from the tread, or exposed steel cords underneath. If you can see the metal reinforcement, the track is past safe use. Uneven wear — one side of the track worn more than the other — usually means the track is misaligned or the machine needs adjustment, but it still signals that replacement is coming soon.

Steering problems are another warning. If the machine pulls to one side even when you try to drive straight, or if it does not turn as sharply as it used to, one track may be slipping or losing grip. On slopes or soft ground, a worn track will slip and spin without moving the machine forward as much as it should. A loud squealing, grinding, or rattling noise from the track area often means the track is loose, damaged, or about to fail. If you hear this, stop using the machine and inspect the track before operating it again.

How to replace a skid steer track

Track replacement is a straightforward but labor-intensive job. Start by positioning the machine on level ground and engaging the parking brake. Locate the bolts or pins that hold the track assembly to the frame — these are usually at the front and rear of the track. On most models, you will remove four to six fasteners per track. Use a socket wrench or pin punch to remove them, keeping the bolts organized so you do not lose them.

Once the fasteners are out, the track should slide off the wheels and frame. If it is stuck, tap it gently with a rubber mallet or explore penetrating oil and wait. Slide the new track onto the wheels and frame, making sure it sits evenly and is not twisted. Reinstall the bolts or pins and tighten them firmly but do not over-tighten, which can crack the track or strip the bolt holes. Check that the track runs straight and does not rub against the frame or wheels as it rotates.

If you are not comfortable doing this work yourself, a dealer or equipment repair shop can do it for you. Expect to pay for labor in addition to the cost of the track itself. The job usually takes two to four hours per track, depending on the machine model and whether the fasteners are corroded or stuck.

Choosing between OEM and aftermarket tracks

Original equipment manufacturer (OEM) tracks are made by the skid steer's builder — Bobcat, Case, John Deere, or another brand — and are designed to fit your exact machine model. They typically cost more than aftermarket tracks but often come with a warranty and are may provide to fit without modification. Aftermarket tracks are made by third-party manufacturers and usually cost less, but quality and fit vary widely.

Before buying an aftermarket track, confirm that it is designed for your specific machine model and year. A track that is slightly too wide or too narrow will not sit properly on the wheels and will wear unevenly or slip. Read reviews from other operators who use the same machine and track brand. Some aftermarket tracks are nearly as good as OEM parts; others fail quickly or cause steering problems. The cheapest option is not always the best value if it wears out in half the time.

Maintenance to extend track life

Proper inflation is the single most important maintenance step. Most skid steer tracks are pneumatic — they contain air — and running them under-inflated causes them to flex too much, overheat, and wear faster. Check the tire pressure regularly and inflate to the pressure listed on the track sidewall or in your operator manual. Over-inflation can cause the track to crack or burst, so stay within the recommended range.

Clean the tracks regularly, especially after working in mud or sand. Dirt and debris trapped between the track and the wheels cause uneven wear and can damage the track. Use a brush or compressed air to remove buildup. Avoid driving over sharp rocks, metal debris, or rough concrete more than necessary, as these puncture or cut the rubber. If you must work in harsh terrain, operate at slower speeds to reduce impact stress on the tracks. Inspect the tracks weekly for damage and address small cracks or loose bolts before they become major problems.

Frequently Asked Questions

Can I repair a skid steer track instead of replacing it?

Small punctures or cuts can sometimes be patched with a rubber repair kit, similar to patching a tire. However, if the damage is large, the track is cracked across its width, or chunks of rubber are missing, repair is not practical. A patched track is a temporary fix and may fail under load. Replacement is safer and more cost-effective for significant damage.

How much does a new skid steer track cost?

Prices vary widely by machine model and track type. OEM tracks typically range from $800 to $2,000 per track, while aftermarket tracks may cost $400 to $1,200. Labor for installation adds another $200 to $500 per track if you have a shop do the work. Contact your dealer or a local equipment repair shop for a quote on your specific machine.

What happens if I keep using a skid steer with a damaged track?

A damaged track will slip, making the machine harder to control and less able to climb slopes or carry heavy loads. A severely damaged track can break completely, leaving you stranded and potentially damaging the wheels or frame. Continuing to operate with a known problem also risks injury if the machine suddenly loses traction or tips. Replace the track before it fails.

Do both tracks need to be replaced at the same time?

Not necessarily, but it is often a good idea. If one track is worn out and the other is still in decent condition, you can replace just the bad one. However, if both are close to the end of their life, replacing them together ensures even wear and steering performance going forward. A new track paired with an old one can cause the machine to pull to one side.

Can I use a skid steer track from a different brand on my machine?

No. Tracks are designed for specific machine models and brands. A Bobcat track will not fit a Case skid steer, and forcing it on will cause steering problems, uneven wear, and potential damage to the machine. Always use a track designed for your exact model and year. Check your operator manual or contact your dealer if you are unsure which track to buy.