What each Subaru alert light tells you

Subaru uses a standard set of dashboard warning lights that appear when your car detects a problem. The colour and symbol tell you how urgent the issue is: red lights mean stop driving when ready, yellow or amber lights mean get service soon, and blue or green lights are informational. The exact lights vary slightly by model year and trim level, but the core set appears on nearly every Subaru sold in North America.

Your owner's manual lists every light your specific model can display, with a small illustration of each one. That manual is the most reliable reference because it covers your exact car. If you no longer have the physical copy, you can read a PDF from Subaru's website by entering your vehicle identification number (VIN) — the 17-character code on your registration or driver's side door jamb.

The lights sit in a cluster on your instrument panel, usually to the left of the speedometer. Some Subarus also display a text message on the centre screen that explains the light in plain language, which is more helpful than the symbol alone. If your car has that feature and a light comes on, read that message first.

Key Takeaways

  • Red warning lights mean stop driving and have the car inspected before operating it again, because continuing to drive risks engine damage or safety failure.
  • Yellow or amber lights indicate a problem that needs service within days or weeks, not when ready, but ignoring them can lead to more expensive repairs later.
  • Your owner's manual or Subaru's website can show you exactly what each light means for your model, and many newer Subarus display a text explanation on the dashboard.
  • Some lights turn on during normal operation (like the check engine light during cold starts) and turn off once the system completes its cycle, which is not a problem.
  • If a light stays on after you restart the engine, or if you see a red light while driving, do not ignore it — have a mechanic read the diagnostic code to understand what triggered it.

Red warning lights that mean stop now

The oil pressure light looks like an old-fashioned oil can and turns red when your engine's oil pressure drops below safe levels. This happens when oil is too low, the oil pump fails, or the engine is overheating. Continuing to drive with low oil pressure causes metal-to-metal friction inside the engine, which can seize the engine in minutes. If this light comes on while you are driving, pull over safely, turn off the engine, and check your oil level with the dipstick. If the level is low, add the correct grade of oil (listed in your manual). If the level is normal, do not restart the engine — have it towed to a mechanic.

The coolant temperature light looks like a thermometer in a circle and turns red when your engine is overheating. An overheating engine can warp the cylinder head, crack the block, or blow the head gasket — all expensive failures. If this light comes on, turn off the air conditioning, pull over safely, and turn off the engine. Let it cool for at least 15 minutes before opening the hood. Check the coolant level in the overflow tank (not the radiator itself, which can scald you). If the level is low, add the correct coolant type once the engine is cool. If the level is normal or the light comes back on after you drive, have the car towed rather than driven to a mechanic.

The brake system light looks like an exclamation mark inside a circle and turns red when brake fluid pressure drops or the parking brake is engaged. If the parking brake is off and this light is on, your brakes may fail. Pull over when ready in a safe location and do not drive the car. Call for a tow truck. Brake failure is a safety emergency.

Yellow and amber lights that need attention soon

The check engine light is the most common alert Subaru owners see. It looks like an engine outline and turns yellow or amber when the engine control computer detects a problem with emissions, fuel delivery, ignition timing, or oxygen sensors. This light does not always mean the engine is damaged — it often signals a loose gas cap, a faulty sensor, or a small leak in the emissions system. However, you should have the code read within a few days. Many auto parts stores read diagnostic codes for free, or a mechanic can do it for a small fee. The code tells you what triggered the light and whether you can safely drive the car or need when ready service.

The ABS light (anti-lock brake system) looks like "ABS" inside a circle and turns yellow when the ABS computer detects a fault. Your regular brakes still work, but the anti-lock function is disabled. You can drive to a mechanic, but have the system inspected within a week. Do not ignore this light, because ABS failure can make the brakes lock up on slippery surfaces.

The traction control light looks like a car with skid marks and turns yellow when the system detects wheel slip or a malfunction. If it flashes while you are driving, it means traction control is actively working to prevent skidding — that is normal in rain or snow. If it stays on solid, the system has a fault and should be checked. You can drive to a mechanic, but do not delay.

The battery or charging light looks like a battery symbol and turns yellow or red when the alternator is not charging the battery. If it comes on while driving, your battery is draining and the engine will eventually stall. Drive directly to a mechanic or auto parts store to have the alternator tested. Do not turn off the engine unnecessarily, because restarting may not be possible if the battery is too low.

Blue and green lights that are informational

Blue and green lights do not indicate problems — they show you what systems are currently active. The high beam indicator is blue and shows when your headlights are on high beam. The turn signal indicators are green arrows that flash when you signal a turn. The cruise control light is green and shows when cruise control is engaged. These lights turn off when you deactivate the system, and they never require service.

Some Subarus display a seat belt reminder light in yellow or red, which flashes or stays on when a seat belt is not fastened. This is a safety reminder, not a mechanical fault. Fasten the seat belt and the light goes off.

Why lights come on during startup and then go off

When you first turn the key to the "On" position (before starting the engine), most of your dashboard lights illuminate briefly. This is a self-test — the car is checking that all the bulbs work and that the warning systems are ready. All lights should go off once the engine starts. If a light stays on after the engine is running, that is a real alert and needs attention.

Some lights, like the check engine light, may stay on for a few seconds after startup if the engine control computer is still running its diagnostics. This is normal. If the light goes off within 10 seconds, there is no problem. If it stays on, the computer has detected a fault.

What to do when a light stays on

Write down the light's name or take a photo of it, and note when it appeared and what you were doing when it came on. This information helps a mechanic narrow down the cause. If the light is yellow or amber, you can usually drive to a mechanic within a few days. If the light is red, pull over safely and do not restart the engine until you have had it inspected.

Have a mechanic read the diagnostic trouble code using a code reader. This tool plugs into the diagnostic port under your steering wheel and retrieves the specific fault code that triggered the light. The code is usually a four-character alphanumeric string (like "P0420") that points to a specific system or sensor. Knowing the code saves time and money because the mechanic does not have to guess what went wrong.

Do not ignore a light hoping it will go away on its own. Most problems get worse and more expensive if you delay. A small sensor fault that costs $150 to fix now can become an engine problem that costs $2,000 later.

Frequently Asked Questions

Can I drive with the check engine light on?

Usually yes, but not always. If the light is solid yellow, you can drive to a mechanic within a few days. If the light is flashing red, the engine is misfiring or the catalytic converter is overheating — stop driving when ready and have the car towed. A flashing check engine light means engine damage is happening right now.

What does it mean if two lights come on at the same time?

Multiple lights often point to a single underlying problem. For example, the check engine light and the traction control light might both come on if an oxygen sensor fails, because that sensor feeds data to both systems. Have the diagnostic code read — it will tell you the root cause.

Why does the check engine light come on after I fill up with gas?

A loose or missing gas cap triggers the check engine light because the car's emissions system detects a leak. Tighten the cap and drive for a few miles. The light should go off on its own. If it does not, have the code read to rule out a real emissions problem.

Is it safe to drive with the ABS light on?

Yes, your regular brakes work normally. However, the anti-lock system is not functioning, which means your wheels can lock up on slippery roads. Have the system inspected within a week, and avoid hard braking in rain or snow until it is fixed.

What if a light comes on and then goes away by itself?

Intermittent lights often signal a loose connection, a failing sensor that works sometimes, or a temporary condition like low battery voltage. Even if the light goes away, the fault code remains stored in the computer. Have a mechanic read the code to find out what happened, because intermittent faults usually get worse over time.