A trailer tongue replacement costs $300 to $800 and takes a few hours if you do it yourself, or a full day at a shop

The tongue is the A-frame metal part that connects your trailer to your vehicle's hitch. It wears out from rust, corrosion, and the constant flexing that happens when you tow. Once it starts to crack, bend permanently, or show deep rust that eats through the metal, replacement is the only safe option — welding a cracked tongue is not reliable for towing loads.

You can replace it yourself if you have basic welding skills and a welder, or take it to a trailer shop or fabrication shop. The cost difference between DIY and professional work is mainly labor: materials run $150 to $400 depending on tongue length and weight capacity, and a shop will charge $200 to $500 in labor on top of that.

Key Takeaways

  • A cracked or severely rusted tongue must be replaced, not repaired, because it carries the full weight of your trailer and cargo.
  • Replacement requires unbolting the old tongue from the trailer frame, removing it, and welding or bolting a new one in its place — a job that takes 2 to 4 hours with the right tools.
  • You need a new tongue that matches your trailer's frame width, weight capacity, and hitch type (ball mount, pintle, gooseneck, or bumper pull).
  • A trailer shop can do the work in one day, but a fabrication shop may take longer if they have to custom-build the tongue to your frame specifications.

Signs your tongue needs replacement

A tongue that is still structurally sound will show surface rust but no cracks or permanent bends. If you see a crack running along the welds or through the metal itself, the tongue is no longer safe to tow with. Cracks grow under the stress of towing and can fail suddenly, causing the trailer to separate from your vehicle.

Rust that has eaten through the metal — where you can see holes or thin spots — also means replacement. Surface rust can be cleaned and painted over, but structural rust that weakens the metal cannot be fixed. A tongue that is bent out of shape and does not sit level when hitched should also be replaced, because it puts uneven stress on your hitch and frame.

What you need to know before ordering a replacement

Your new tongue must match four things: the frame width of your trailer, the weight capacity you need, the hitch type, and the length. Frame width is usually 2 inches or 2 5/8 inches — measure the distance between the inside edges of your trailer frame rails. Weight capacity should be at least as high as your current tongue; if you do not know it, check your trailer's VIN plate or the original paperwork.

Hitch type matters because a ball mount tongue (the most common) looks different from a pintle hook tongue (used on equipment trailers) or a gooseneck tongue (which sits over the truck bed). Tongue length is measured from the back of the hitch ball or hook to where it bolts to the frame. If you are ordering from a trailer parts supplier, they will ask for all four measurements and can confirm the right part before you pay.

DIY replacement with a welder

If you have access to a welder and basic welding experience, you can do this work yourself. Start by removing the bolts that connect the old tongue to the trailer frame — usually four to six bolts on each side. You may need a cutting torch or reciprocating saw to cut through bolts that are seized or rusted solid. Once the old tongue is off, clean the frame ends where the new tongue will bolt on, removing rust and old weld material.

Position the new tongue and align it so it sits level and centered on the frame. Bolt it loosely first, then tack-weld the corners to hold it in place while you check alignment one more time. Once you are satisfied, run full welds along all four corners where the tongue meets the frame. Let the welds cool, then tighten all bolts to the specifications in your trailer manual — usually 40 to 60 foot-pounds of torque for 1/2-inch bolts.

The whole job takes 2 to 4 hours depending on how corroded the old bolts are and how comfortable you are welding. If you do not have a welder or welding experience, a trailer shop is the safer choice.

Taking it to a trailer shop

A trailer shop that specializes in repairs and modifications can handle the replacement in one day. Call ahead with your trailer's dimensions and hitch type so they can order the right tongue before you bring it in. When you drop it off, let them know if there are any other issues you have noticed — a bent frame, worn bearings, or brake problems — so they can give you a full estimate.

The shop will remove the old tongue, prepare the frame, install the new one, and weld it in place. They will also check that the new tongue is level and aligned correctly before you pick it up. Expect to pay $300 to $800 total depending on how difficult the old tongue is to remove and whether any frame damage needs repair at the same time.

Custom fabrication if your tongue is non-standard

Some trailers — especially older ones or custom builds — have unusual frame widths or hitch configurations that do not match standard replacement tongues. A fabrication shop can build a new tongue from scratch to match your frame. This costs more ($500 to $1,200) and takes longer (3 to 7 days) because they have to measure your frame, design the tongue, and build it before installation.

If you go this route, bring your trailer to the shop so they can measure it directly rather than relying on your measurements. They will also check the frame for damage while the tongue is off, which can catch problems before they become expensive.

After replacement: what to check

Once the new tongue is installed, inspect the welds for cracks or gaps before you tow anything. The welds should be smooth and continuous with no visible holes. Tighten all bolts again after your first tow — vibration can loosen them slightly. Check the hitch ball or hook for damage and make sure it is the right size for your coupler.

If you replaced the tongue because of rust, address what caused the rust in the first place. Trailers stored outside in wet climates rust faster. If that is your situation, wash the new tongue with fresh water after towing in salt or rain, and explore a coat of paint or rust inhibitor every year. A tongue that is maintained will last 15 to 20 years before rust becomes a problem again.

Frequently Asked Questions

Can I weld a cracked tongue instead of replacing it?

Welding a crack stops the leak temporarily but does not restore the tongue's strength. The metal around the crack is already weakened, and the crack will grow again under the stress of towing. A replacement is the only safe option for a cracked tongue.

How do I know what weight capacity my new tongue should have?

Check your trailer's VIN plate, usually mounted on the frame near the tongue. It lists the gross vehicle weight rating (GVWR) and the tongue weight capacity. Your new tongue should match or exceed that number. If you cannot find the plate, a trailer shop can look it up by VIN.

What if my trailer frame is bent where the tongue bolts on?

A bent frame will cause the new tongue to sit crooked and wear unevenly. Have the frame straightened or reinforced before installing the new tongue. A fabrication shop can assess the damage and tell you whether straightening is possible or if the frame section needs to be cut out and replaced.

Do I need to replace the hitch ball or hook when I replace the tongue?

Not necessarily. If the ball or hook is not damaged and the right size for your coupler, you can reuse it. If it is worn, cracked, or the wrong size, replace it at the same time — a new ball or hook costs $20 to $60 and is straightforward to install.

How long does a new tongue last?

A well-maintained tongue lasts 15 to 20 years. Rust is the main enemy, so wash your trailer after towing in wet or salty conditions and touch up any paint damage. Store it under cover if possible, or use a trailer cover in winter.