What the Vehicle Modification Station does

The Vehicle Modification Station is a base module in Subnautica that lets you upgrade and customize your submarines and the Prawn Suit. It is the only way to install most upgrades on these vehicles — you cannot add them by hand or through your inventory. The station itself is a fabricator-style machine that you build inside your base, and it requires power to run.

Once built, you interact with it the same way you would a regular fabricator: place the upgrade module and the vehicle in range, open the interface, and select what you want to install. The station will consume the upgrade module and attach it to your vehicle's upgrade slots. Different vehicles have different numbers of slots, and some upgrades take up more than one.

Key Takeaways

  • The Vehicle Modification Station is built inside your base and requires power to function, unlike upgrades you can craft at a regular fabricator.
  • You must have both the upgrade module and the vehicle physically present and in range of the station to install anything.
  • The Seamoth has four upgrade slots, the Prawn Suit has twelve, and the Neptune has six, so larger vehicles can carry more modifications.
  • Some upgrades like the Depth Module stack — you can install multiple copies to go deeper — while others like the Docking Module cannot be stacked.
  • If you want to remove an upgrade, you must deconstruct the station, which returns the upgrade module to your inventory.

Where to build the Vehicle Modification Station

You unlock the blueprint for the Vehicle Modification Station by scanning the wreckage in the Mushroom Forest, the Kelp Forest, or the Safe Shallows. Once you have the blueprint, you craft it at a regular fabricator like any other base module — it costs 1 Titanium, 1 Aerogel, and 2 Diamonds.

Place it in a room or corridor of your base where you have space. The station takes up a single foundation tile and does not need to be in a specific room type. However, you need to be able to drive your vehicle close enough to interact with the station — usually this means having a moon pool or a large open area nearby. If your Seamoth or Prawn Suit cannot physically reach the station, you cannot use it.

The station requires power like any other base module. If your base power runs out, the station will not function until you restore power. Plan your base layout so the station is on the same power grid as your other essential modules.

Which upgrades work in the Vehicle Modification Station

Not every upgrade you can craft goes into the Vehicle Modification Station. Some upgrades — like the Seamoth's Sonar or the Prawn Suit's Grappling Arm — can only be installed at the station. Others, like the Reinforced Dive Suit, are worn as equipment and do not use the station at all.

The most common upgrades you will install here are Depth Modules, which let your vehicles go deeper without taking crush damage. The Seamoth Depth Module Mark 1 lets you reach 300 meters, Mark 2 reaches 500 meters, and Mark 3 reaches 800 meters. The Prawn Suit has similar tiers. You can stack multiple Depth Modules in a single vehicle to reach the maximum depth for that vehicle type.

Other station-only upgrades include the Seamoth's Sonar, the Prawn Suit's Grappling Arm and Drill Arm, and the Neptune's various modules. Check the upgrade's description in your PDA or at the fabricator — if it says it installs at the Vehicle Modification Station, you will need the station to add it.

How to remove or swap upgrades

If you want to take an upgrade off a vehicle, you cannot do it at the station itself. Instead, you must deconstruct the entire Vehicle Modification Station by holding down the deconstruct button while looking at it. This returns the station to your inventory as a blueprint and returns all installed upgrades to your inventory as well.

This is inconvenient if you want to swap upgrades often, so plan your vehicle loadouts before you install them. If you are experimenting with different Depth Modules or trying out a Grappling Arm versus a Drill Arm on your Prawn Suit, do your testing before you commit to a build.

Once you deconstruct the station, you can rebuild it at the same location or move it elsewhere in your base. Rebuilding costs the same resources as the first build: 1 Titanium, 1 Aerogel, and 2 Diamonds.

Upgrade slots and how they work

Each vehicle has a fixed number of upgrade slots, and each upgrade takes up a certain number of slots. The Seamoth has 4 slots, the Prawn Suit has 12 slots, and the Neptune has 6 slots. Some upgrades, like the Depth Module, take up 1 slot each. Others, like the Prawn Suit's Grappling Arm, take up 2 slots.

You can see how many slots your vehicle has used by opening its upgrade menu at the Vehicle Modification Station. The interface shows you each slot and what is installed in it. If you have filled all available slots, you cannot add another upgrade until you remove one.

Stacking upgrades — installing multiple copies of the same upgrade — works for Depth Modules and some other stackable upgrades. Each copy takes up its own slot. For example, you could install three Seamoth Depth Module Mark 3s if you wanted, using 3 of your 4 available slots.

Power requirements and troubleshooting

The Vehicle Modification Station draws power from your base's power grid. If the station is not responding when you interact with it, check your base's power level. If power is low or depleted, the station will not function until you restore it by adding more power cells to your power cells or building more solar panels or thermal plants.

If the station is powered but you still cannot install an upgrade, check that the upgrade module is in your inventory and that your vehicle is in range. The vehicle must be close enough to the station to interact with it — if it is too far away or blocked by walls, the station will not recognize it. Move your vehicle closer or rebuild the station in a more accessible location.

If you have the upgrade module and the vehicle in range but the station still will not let you install it, check the vehicle's upgrade slots. If all slots are full, you must remove an existing upgrade first. Some upgrades also have prerequisites — for example, you cannot install a Depth Module Mark 2 unless you already have Mark 1 installed, depending on the game version.

Frequently Asked Questions

Can I install upgrades without building a Vehicle Modification Station?

No. Some upgrades can only be installed at the Vehicle Modification Station. You can craft the upgrade module at a regular fabricator, but you must use the station to attach it to your vehicle. The station is a required structure if you want to use most vehicle upgrades.

What happens if I deconstruct my base with the Vehicle Modification Station still inside?

If you deconstruct the base module that contains the station, the station itself will be destroyed and you will lose any upgrades currently installed on vehicles in that area. Always remove upgrades and deconstruct the station separately before deconstructing the room it is in.

Can I have more than one Vehicle Modification Station in my base?

Yes. You can build multiple stations if you want, though each one costs the same resources. Having more than one station does not give you any gameplay advantage — it is purely for convenience if you want to avoid walking between rooms.

Do I need a moon pool to use the Vehicle Modification Station?

Not necessarily, but it helps. A moon pool lets you dock your vehicle inside your base, which keeps it safe and makes it straightforward to access the station. You can also use the station if your vehicle is in the water outside your base, as long as it is close enough to interact with the station through a window or open area.

What is the deepest I can go with all Depth Module upgrades installed?

The Seamoth can reach 800 meters with three Depth Module Mark 3 upgrades installed. The Prawn Suit can reach 1,300 meters with the right combination of Depth Modules. The Neptune has a built-in depth limit of 2,000 meters and does not use Depth Module upgrades the same way.