What a delete kit does and why owners choose them

A delete kit for a 6.7 Powerstroke removes or bypasses emissions control components — typically the diesel particulate filter (DPF), exhaust gas recirculation (EGR) system, and selective catalytic reduction (SCR) system. Owners install these kits to reduce backpressure, lower engine temperatures, and improve fuel economy and power output.

The trade-off is significant: deleting these systems is illegal for on-road use in all 50 states under the Clean Air Act. The EPA can fine you up to $37,500 per vehicle, and your truck will fail emissions testing. Many shops will not perform the work, and insurance may not cover engine damage that results from a delete. Understand this is an off-road-only modification.

If you use your truck exclusively off-road or on private land, the main decision is which kit to buy and whether to tune the engine at the same time. The kit itself is only half the job — you also need custom tuning to prevent check engine lights and optimize performance after the components are removed.

Key Takeaways

  • Delete kits remove emissions equipment and are illegal for street use; they are only for off-road trucks and subject to EPA fines if used on public roads.
  • The three main brands — ATS, Flo Pro, and Sinister Diesel — differ in price, warranty coverage, and whether they include tuning or require a separate tune.
  • A complete delete requires both the physical kit and a custom engine tune to prevent fault codes and optimize performance.
  • Installation typically costs $1,500 to $3,000 in labor on top of the kit price, and you will need a shop experienced with 6.7 Powerstrokes.
  • Deleting the DPF alone is cheaper than a full delete but still illegal on-road and leaves EGR and SCR systems in place.

ATS, Flo Pro, and Sinister Diesel: the main kit options

The three most common delete kits for 6.7 Powerstrokes are made by ATS (Diesel Performance), Flo Pro (Flo-Pro Inc.), and Sinister Diesel. Each takes a different approach to what components to remove and what warranty they offer.

ATS offers a full delete kit that removes DPF, EGR, and SCR. The kit includes new exhaust piping and a resonator but does not include tuning. You must purchase tuning separately, usually from ATS or a third-party tuner. ATS kits are mid-range in price and come with a limited warranty that covers defects in materials and workmanship but explicitly excludes use on public roads.

Flo Pro makes both full delete and DPF-only kits. Their full delete removes all three systems and includes new exhaust components. Flo Pro kits are generally less expensive than ATS but also come with no tuning included. Flo Pro's warranty is similar to ATS — it covers manufacturing defects but not road use or performance claims.

Sinister Diesel positions itself as a premium option. Their kits include more extensive exhaust work and are often bundled with tuning options or sold alongside recommended tuners. Sinister Diesel kits cost more upfront but may save you money if tuning is included. Their warranty is comparable to the others but emphasizes customer support for installation questions.

Full delete versus DPF-only: cost and complexity

A full delete removes the DPF, EGR cooler, and SCR system. This is the most effective way to reduce backpressure and engine temperatures, and it prevents the truck from trying to regenerate the DPF (which can happen unexpectedly and reduce power). A full delete kit costs between $800 and $1,500 depending on the brand and what exhaust components are included.

A DPF-only delete removes just the particulate filter and replaces it with a straight pipe or resonator. The EGR and SCR systems remain. This is cheaper — typically $400 to $700 — and simpler to install, but it leaves two major emissions systems in place. Your truck will still try to run EGR, which can cause carbon buildup and higher engine temperatures over time. A DPF-only delete is a middle ground if cost is the main concern, but it does not solve the core problem of backpressure.

Most experienced 6.7 Powerstroke owners recommend a full delete if you are going to do the work at all. The cost difference is not large, and the performance and longevity benefits of removing all three systems are substantial. A DPF-only delete often feels like a compromise that leaves you with most of the problems.

Tuning: why you cannot skip it and what it costs

After you install a delete kit, the engine computer will detect missing components and throw fault codes. You need a custom tune to rewrite the engine software so it stops looking for the DPF, EGR, and SCR. Without a tune, your truck will run in limp mode or display a check engine light constantly.

Tuning is not a one-size-fits-all product. A generic tune may prevent fault codes but will not optimize the engine for the new airflow and exhaust conditions. A custom tune adjusts fuel injection, timing, boost pressure, and other parameters to take advantage of the delete and prevent damage. Custom tuning typically costs $400 to $800 and must be done by a shop with experience on 6.7 Powerstrokes.

Some delete kits come bundled with tuning or a tuning credit. ATS and Sinister Diesel sometimes offer this. Flo Pro kits usually do not, so you will need to budget for tuning separately. Ask the kit manufacturer or your installer which tuners they recommend — not all tuners are compatible with all kits, and a bad tune can cause serious engine damage.

Installation labor and finding a may have access to shop

A full delete installation takes 8 to 16 hours depending on the kit and the shop's experience. Labor costs typically run $1,500 to $3,000. Some shops charge by the hour (usually $100 to $150 per hour for diesel work), and others quote a flat rate for a full delete package including tuning.

Finding the right shop is critical. Not all diesel mechanics are experienced with deletes, and a poor installation can leave you with exhaust leaks, boost leaks, or tuning problems that are expensive to fix. Ask your local truck community or online 6.7 Powerstroke forums for shop recommendations. Call ahead and ask if the shop has done deletes on your model year and which kit brands they prefer.

Some shops will not perform deletes at all because of the legal liability. If you live in a state with strict emissions enforcement, you may have to travel to a neighboring state or find a shop that specializes in off-road work. Budget for this when you plan the job.

Warranty, reliability, and long-term costs

All three major kit manufacturers disclaim warranty coverage for on-road use. If you are caught driving a deleted truck on public roads and the engine fails, the kit maker will not cover it. Your truck's factory warranty from Ford will also be void for any engine-related damage once a delete is discovered.

Off-road reliability depends heavily on the quality of the tune and installation. A well-done delete on a 6.7 Powerstroke typically improves engine longevity by reducing heat and carbon buildup. A poorly tuned delete can cause detonation, turbo damage, or injector failure. This is why choosing an experienced shop and a reputable tuner matters more than the kit brand itself.

Long-term costs are lower after a delete if the truck is used off-road. You will not need DPF cleaning or regeneration cycles, and fuel economy often improves by 2 to 4 miles per gallon. However, if your truck is ever discovered to be deleted during a trade-in or sale, the resale value will drop significantly because the next owner cannot legally drive it on public roads.

Frequently Asked Questions

Can I delete just the DPF and keep the EGR and SCR?

Yes, and many shops offer DPF-only deletes as a lower-cost entry point. However, the EGR system will still recirculate hot exhaust gas into the engine, which causes carbon buildup and higher temperatures. Most owners who delete the DPF end up doing a full delete later because the DPF-only approach does not solve the underlying backpressure problem.

What happens if I get caught driving a deleted truck on the road?

The EPA can issue a fine up to $37,500 per vehicle. Your state may also fine you during emissions testing or roadside inspection. Insurance typically will not cover engine damage from a deleted truck, and you may face liability issues if the truck causes an accident. The legal risk is real and substantial.

Do I need to tune the truck after a delete?

Yes, absolutely. Without a tune, the engine computer will detect the missing emissions components and throw fault codes or enter limp mode. A tune rewrites the engine software to remove those fault codes and optimize performance for the new exhaust configuration. Tuning is not optional.

Which delete kit is the best for reliability?

All three major brands — ATS, Flo Pro, and Sinister Diesel — produce reliable kits. The difference is small. Reliability depends much more on the quality of the installation and tune than on the kit brand. Choose a shop with experience on 6.7 Powerstrokes and ask which kit they prefer based on their own installation history.

How much fuel economy improvement should I expect?

Most owners report 2 to 4 miles per gallon improvement after a full delete and tune, especially if the truck is towing or working hard. Some see more, some less, depending on driving habits and how aggressive the tune is. A full delete removes backpressure and allows the engine to breathe more freely, which is why fuel economy typically improves.