The 2015 Kia Optima uses a cartridge-style oil filter located on top of the engine

The 2015 Kia Optima does not have a traditional spin-on oil filter. Instead, it uses a cartridge-style filter housed in a plastic cap on the top of the engine. This design is common on modern Kias and means you'll be replacing a filter element inside a reusable housing, not screwing off an entire canister. The filter cap is typically located toward the front-center of the engine bay, and you can access it without removing other components.

The cartridge filter element itself is smaller and less expensive than a spin-on filter, but the replacement process is slightly different. You'll need an oil filter wrench to remove the cap, a new filter element, and a new rubber gasket seal. Most people can complete this job in 10 to 15 minutes once they have the right tools and parts on hand.

Key Takeaways

  • The 2015 Optima has a cartridge-style oil filter in a cap on top of the engine, not a spin-on filter underneath.
  • You will need an oil filter wrench (usually 74 mm or 86 mm depending on engine size), a replacement filter element, and a new rubber gasket to complete the job.
  • The filter element costs between $8 and $15, and the gasket is typically included with the element or costs $2 to $4 separately.
  • Drain the oil first, then remove the filter cap, replace the element and gasket, and reinstall the cap hand-tight plus a quarter turn.

Which filter element and gasket your Optima needs

The 2015 Kia Optima came with either a 2.0-liter turbocharged engine or a 2.4-liter naturally aspirated engine. Both use the same cartridge-style filter housing, but the filter element part numbers differ slightly. For the 2.0T engine, the OEM filter element is Hyundai/Kia part number 26320-2B100. For the 2.4L engine, it is 26320-2B200. You can use either the genuine Kia part or an equivalent aftermarket cartridge filter from brands like Fram, Mobil 1, or Bosch.

The rubber gasket that seals the filter cap to the engine is equally important. The OEM gasket is part number 26320-2B000 and typically costs $3 to $5. Many filter elements come with a gasket included, so check the package before buying separately. If you buy a filter element alone, you must purchase the gasket separately—reusing the old gasket will cause oil leaks.

Tools and supplies you'll need

Start with an oil filter wrench sized to fit your filter cap. The 2015 Optima uses either a 74 mm or 86 mm cap depending on engine size; a 74 mm wrench fits the 2.0T, and an 86 mm wrench fits the 2.4L. You can confirm which size you need by measuring the cap diameter or checking your owner's manual. A socket-style filter wrench is more reliable than a strap wrench for cartridge filters because it grips the cap more securely and is less likely to slip.

You will also need a drain pan to catch old oil, a clean rag or paper towels, and the replacement filter element and gasket. Some people use a small brush or compressed air to clean the inside of the filter housing before installing the new element, which removes any debris or old gasket material. This step is optional but recommended if you notice dirt or residue inside the cap.

Step-by-step replacement process

Begin by warming the engine for two to three minutes, then turning it off and waiting five minutes. Warm oil drains faster and more completely. Locate the oil drain plug underneath the engine (usually on the passenger side of the oil pan) and remove it with a wrench, letting the old oil drain into your pan. While the oil drains, locate the filter cap on top of the engine.

Once the oil has stopped dripping, use your filter wrench to turn the cap counterclockwise and remove it. The old filter element will come out with the cap. Discard the element and inspect the rubber gasket on the underside of the cap. If it is cracked, hardened, or stuck to the engine, clean it off with a rag and install the new gasket. The gasket should sit in the groove on the underside of the cap and should not be twisted or folded.

Insert the new filter element into the cap, making sure it sits flat and centered. Reinstall the cap by hand first, then use the filter wrench to tighten it. Turn the wrench until the gasket contacts the engine, then turn an additional quarter turn—do not over-tighten. Replace the oil drain plug and tighten it snugly. Reinstall the oil drain pan plug if your Optima has one, then refill the engine with the correct amount and grade of new oil as specified in your owner's manual.

Oil filter wrench options and where to buy

A socket-style oil filter wrench is the most reliable choice for cartridge filters. These wrenches have a hollow socket that slides over the filter cap and grip it from the outside. Brands like OTC, Lisle, and Lokar make quality socket wrenches in both 74 mm and 86 mm sizes, typically priced between $15 and $30. If you own multiple vehicles or plan to change your own oil regularly, a socket wrench is worth the investment because it will last for years.

Strap wrenches are cheaper (usually $8 to $12) but less reliable on cartridge filters because the rubber strap can slip if you explore too much force. If you choose a strap wrench, buy one with a reinforced handle and practice tightening it slowly to avoid stripping the cap. You can find both types at auto parts stores like AutoZone, O'Reilly, or Advance Auto Parts, as well as online retailers like Amazon. Many stores will rent a filter wrench for a small deposit if you do not want to buy one.

Common mistakes to avoid

The most frequent error is over-tightening the filter cap. The rubber gasket is designed to seal at a specific pressure, and turning the wrench too hard can crush the gasket or crack the plastic cap. Tighten until you feel resistance, then turn exactly one quarter turn more—no further. If you over-tighten and crack the cap, you will need to replace the entire housing, which costs $40 to $80 and requires removing the cap assembly from the engine.

Another common mistake is forgetting to replace the gasket. The old gasket hardens over time and loses its ability to seal, so reusing it will cause oil to seep around the cap. Always install a new gasket with every filter change. Finally, do not mix up the filter element part numbers for the two engine sizes. Installing the wrong element will not damage anything, but it may not fit properly or seal correctly, so verify the part number before you buy.

Frequently Asked Questions

Can I use a spin-on oil filter on my 2015 Optima instead of the cartridge style?

No. The 2015 Optima is designed for a cartridge-style filter only. The engine does not have a spin-on filter adapter, and aftermarket adapters are not recommended because they can cause oil pressure issues or leaks. Stick with the cartridge filter system that came with your vehicle.

How often should I replace the oil filter on a 2015 Optima?

Kia recommends replacing the oil filter every time you change the oil. For most 2015 Optimas, that is every 10,000 miles or 12 months, whichever comes first. If you drive in severe conditions (frequent short trips, towing, or dusty environments), Kia suggests changing the oil and filter every 5,000 miles instead.

What happens if I install the filter element backwards?

The filter element has a flat end and a pleated end. If you insert it backwards (pleated end down), it will not seat properly in the housing and oil will bypass the filter media. Always insert the element with the flat end facing down into the cap. The element should sit flush against the bottom of the housing with no gaps.

Do I need to pre-fill the new filter element with oil before installing it?

No. Unlike spin-on filters, cartridge elements do not need to be pre-filled. straightforward insert the dry element into the cap and reinstall the cap on the engine. The oil will flow through the element once the engine starts.

Can I reuse the plastic filter cap if it cracks?

No. If the cap cracks, you must replace the entire cap assembly. A cracked cap will leak oil and cannot be sealed with gaskets or sealant. Replacement caps cost $40 to $80 from Kia dealers or aftermarket suppliers. This is why avoiding over-tightening is important—a cracked cap is an expensive mistake.