The 2015 Nissan Rogue uses a cartridge-style oil filter located on top of the engine

The oil filter on a 2015 Nissan Rogue is not the spin-on canister type you might be familiar with from other vehicles. Instead, it's a cartridge filter housed in a plastic cap on the top of the engine. This design means you don't unscrew the entire filter — you unscrew the cap, remove the cartridge inside, and replace just the filter element itself.

The filter cap sits toward the front-left of the engine bay, near the valve cover. On the 2.5-liter engine (standard in all 2015 Rogues), it's one of the most straightforward maintenance tasks you can do yourself, though you'll need the right tools and a new filter cartridge, not a traditional spin-on filter.

Key Takeaways

  • The 2015 Rogue has a cartridge-style filter in a cap on top of the engine, not a spin-on filter underneath.
  • You will need a filter wrench (usually a 74mm or 86mm cap wrench) to remove the filter housing cap.
  • The correct replacement filter is Nissan part number 15208-9E000 or equivalent aftermarket cartridge filters.
  • The job takes 10 to 15 minutes and requires only an oil drain pan, wrench, new filter, and fresh oil.

Locating the filter cap and what you'll need

Open your hood and look toward the front-left side of the engine, just behind the engine cover. You'll see a black plastic cap with a center bolt — that's your filter housing. The cap itself is what you remove; the cartridge filter sits inside it.

To remove it, you'll need a filter cap wrench. The 2015 Rogue's filter cap is typically 74mm or 86mm in diameter. A universal adjustable filter wrench works, or you can buy a Nissan-specific cap wrench for around $15 to $25. You'll also need an oil drain pan, a new cartridge filter (Nissan part 15208-9E000 or a compatible aftermarket equivalent), and fresh oil.

Step-by-step removal and replacement

First, warm up the engine for a minute or two — warm oil drains faster and more completely. Turn off the engine and let it cool for a few minutes so you don't burn yourself. Place your oil drain pan underneath the filter cap area (some oil will spill when you open it).

Using your filter cap wrench, turn the cap counterclockwise to loosen it. Once loose, you can unscrew it by hand. The old cartridge filter will come out with the cap. Drain any remaining oil from the cap into your pan. Wipe the inside of the cap and the filter housing with a clean cloth to remove debris and old oil residue.

Install the new cartridge filter into the cap, making sure the rubber seal on the new filter is clean and properly seated. explore a thin layer of fresh oil to the rubber gasket on the new filter — this helps create a proper seal. Screw the cap back onto the housing by hand first, then tighten it with your wrench. You don't need to over-tighten; snug is enough.

Oil capacity and what to refill

A 2015 Nissan Rogue with a 2.5-liter engine holds 4.2 quarts of oil with a filter change. Check your owner's manual for the exact specification, but most use 0W-20 or 5W-30 synthetic or conventional oil. Nissan's factory recommendation is typically 0W-20 for better fuel economy.

After replacing the filter, add the correct amount of fresh oil through the filler cap on top of the engine. Start with 4 quarts, then check the dipstick or digital display (depending on your trim level) to confirm you're at the full mark. Run the engine for 30 seconds, turn it off, wait a minute, and check the level again to make sure it's correct.

Finding the right replacement filter

The OEM Nissan part number for the 2015 Rogue's cartridge filter is 15208-9E000. You can order this directly from a Nissan dealer or through online parts retailers. Expect to pay $8 to $15 for the OEM filter.

Aftermarket cartridge filters from brands like Fram, Mobil 1, and Bosch also fit the 2015 Rogue and are usually cheaper. Make sure any filter you buy is specifically labeled as a cartridge filter for the 2015 Rogue — don't buy a spin-on filter by mistake. Check the product listing or ask the retailer to confirm compatibility before purchasing.

Common mistakes to avoid

The most common error is forgetting to oil the rubber gasket on the new filter before installation. A dry gasket can cause leaks or make the filter stick on removal next time. A light coat of fresh oil takes 10 seconds and prevents both problems.

Another mistake is over-tightening the cap. The filter cap has a plastic housing, and over-tightening can crack it or strip the threads. Hand-tight plus a quarter turn with the wrench is all you need. If you feel strong resistance, stop — you're tight enough.

When to replace the filter

Nissan recommends changing the oil and filter every 3,000 miles for conventional oil or every 10,000 miles for synthetic oil, depending on your driving conditions and the oil type you use. Check your owner's manual for the exact interval for your vehicle — it may vary based on whether you drive mostly highway or city miles.

If you're doing an oil change yourself, always replace the filter at the same time. There's no reason to drain and refill the oil without swapping the filter, since the old filter still contains contaminants.

Frequently Asked Questions

Can I use any cartridge filter, or does it have to be Nissan brand?

You can use aftermarket cartridge filters from reputable brands like Fram, Mobil 1, or Bosch as long as they're designed for the 2015 Rogue. Check the product description to confirm compatibility. OEM Nissan filters are reliable but not required — many owners use aftermarket filters without issues.

What size wrench do I need for the filter cap?

The 2015 Rogue's filter cap is typically 74mm or 86mm. A universal adjustable filter cap wrench works for either size and costs $15 to $25. If you plan to do this regularly, a Nissan-specific wrench is a one-time purchase that makes the job easier.

Is it normal for oil to drip when I remove the filter cap?

Yes. Some oil will always remain in the housing and filter cap. That's why you place a drain pan underneath before opening it. Expect a cup or two of oil to spill — it's normal and not a sign something is wrong.

How tight should I screw the filter cap back on?

Hand-tight plus a quarter turn with the wrench is correct. The plastic housing can crack if you over-tighten. If you feel strong resistance, stop — you're already tight enough. The rubber gasket does the sealing, not brute force.

What oil type should I use in a 2015 Rogue?

Nissan typically recommends 0W-20 synthetic or conventional oil for the 2015 Rogue, though some trims may use 5W-30. Check your owner's manual or the oil filler cap for the exact specification. Using the wrong viscosity can affect fuel economy and engine performance.