The 2024 Chevy Trax uses the ACDelco PF63 or Motorcraft FL910S oil filter
Chevrolet specifies the ACDelco PF63 as the factory oil filter for the 2024 Trax with the 1.3L turbo engine. This is the filter Chevy installs at the plant and the one listed in your owner's manual. If you cannot find the PF63 locally, the Motorcraft FL910S is a direct equivalent that fits the same housing and meets the same specifications.
Both filters are spin-on type, meaning they screw onto the filter housing on top of the engine. The housing is straightforward to locate — it sits on the driver's side of the engine block, marked with a blue cap. You do not need an adapter or special tool beyond a standard oil filter wrench.
The filter capacity is the same regardless of which brand you choose: both hold about 0.5 quarts of oil. When you change the filter, expect to lose a small amount of oil from the housing, so plan to top off your oil level after installation.
Key Takeaways
- The ACDelco PF63 is the factory filter for all 2024 Trax models with the 1.3L turbo engine.
- Motorcraft FL910S is a direct replacement if the ACDelco is unavailable at your local parts store.
- Both filters screw onto the same housing on the driver's side of the engine and hold 0.5 quarts of oil.
- You will lose a small amount of oil when removing the old filter, so check and top off your oil level after installation.
Where to buy the correct filter
The ACDelco PF63 is stocked at most auto parts chains including AutoZone, O'Reilly, NAPA, and Advance Auto Parts. A single filter typically costs between $8 and $15 depending on the retailer and whether you are buying it alone or as part of an oil change kit. Many stores offer online ordering with in-store pickup the same day.
If you order online, search by the part number PF63 rather than by vehicle year and model — this avoids confusion with other Chevy engines that use different filters. The Motorcraft FL910S is less common in general auto parts stores but is usually available at Ford dealerships and some Walmart locations.
Chevy dealerships stock the ACDelco PF63 and can order it overnight if they do not have it on hand. Dealership prices are typically higher than independent retailers, but you get the assurance that the part is genuine.
How to confirm you have the right filter before you buy
Check your owner's manual first. The manual lists the correct filter by part number in the maintenance section, usually under "Engine Oil and Filter Capacity." If you do not have a physical copy, you can view the manual free on GM's website by entering your VIN.
If you are unsure of your engine size, look at your window sticker or registration. The 2024 Trax comes with only one engine option — the 1.3L turbo — so any 2024 model year Trax uses the PF63. Do not rely on the salesperson at the parts counter to match the filter to your car; bring your VIN or a photo of your registration to be certain.
Spin-on filter installation basics
The ACDelco PF63 and Motorcraft FL910S both install the same way. Locate the blue filter cap on top of the engine, use an oil filter wrench to unscrew the old filter housing, and remove the cartridge inside. Wipe the sealing surface clean with a lint-free cloth.
Insert the new filter cartridge into the housing, hand-tighten the cap until it seats, then turn it another three-quarters of a turn. Do not over-tighten — this can damage the sealing gasket and cause leaks. Start the engine and let it run for 30 seconds, then turn it off and wait five minutes before checking the oil level on the dipstick.
If you are changing the oil at the same time, drain the old oil first, replace the drain plug if needed, then change the filter. This order prevents you from draining fresh oil through the filter housing.
Oil filter change intervals for the 2024 Trax
Chevrolet recommends changing the oil and filter every 10,000 miles or 12 months, whichever comes first, under normal driving conditions. If you drive in severe conditions — frequent short trips, towing, dusty roads, or extreme temperatures — change the filter every 5,000 miles instead.
Your Trax has an oil life monitoring system that displays a message on the dashboard when service is due. This system accounts for your actual driving patterns and is more accurate than a fixed mileage interval. When the message appears, schedule your oil change within the next 500 miles.
What happens if you use the wrong filter
Using a filter that does not fit the housing will cause leaks around the sealing surface. A filter with the wrong flow rating can restrict oil circulation or allow unfiltered oil to bypass the filter element, both of which damage the engine over time.
Filters designed for other Chevy engines may have a different thread size or sealing diameter, so they will not screw onto the housing correctly. Always verify the part number before you install it. If you accidentally install the wrong filter, remove it when ready and replace it with the correct one.
Frequently Asked Questions
Can I use a Fram or Bosch filter instead of ACDelco?
Yes. Fram TG3593 and Bosch 3323 are both compatible with the 2024 Trax and meet Chevy's specifications. They cost less than ACDelco at most retailers. The key is matching the filter to the 1.3L turbo engine, not the brand — many filters with similar part numbers fit different engines.
How do I know if my filter is leaking?
A leaking filter shows oil drips on the ground under the engine or a visible wet ring around the filter cap. This usually means the cap was over-tightened or the sealing gasket was damaged during installation. Stop driving and replace the filter when ready to prevent oil loss.
Do I need to replace the drain plug when I change the filter?
No, not every time. Replace the drain plug only if it is stripped, cracked, or leaking. Most drain plugs last the life of the vehicle. If you are unsure whether yours needs replacement, inspect it for damage before reinstalling it.
What oil viscosity should I use with the new filter?
The 2024 Trax uses 0W-20 synthetic oil. This viscosity is printed on the oil cap and in your owner's manual. Using the correct viscosity matters more than the oil brand — the filter works with any 0W-20 oil that meets GM's dexos1 specification.
Can I change the filter without changing the oil?
Yes, you can change the filter alone. However, the filter and oil work together — old oil loses its ability to protect the engine even if the filter is new. Chevy recommends changing both at the same interval, so changing only the filter is a temporary measure if you are between oil changes.