The 2025 Ram 1500 uses a Mopar 68157291AA oil filter as original equipment
If you own a 2025 Ram 1500, the factory oil filter is the Mopar 68157291AA, a spin-on cartridge filter that fits all gasoline engine variants — the 3.6L V6, 5.7L V8, and 5.7L V8 with eTorque hybrid information. This is the filter Ram installs at the factory and the one listed in your owner's manual maintenance schedule. Knowing the exact part number matters because it ensures you get a filter designed for your truck's oil system pressure and flow rate.
The Mopar filter is not the only option available. Aftermarket manufacturers including Fram, Motorcraft, ACDelco, and Bosch produce filters that meet or exceed the specifications your Ram requires. The choice between OEM (original equipment manufacturer) and aftermarket comes down to cost, availability, and your maintenance preferences. Some owners stick with Mopar filters for peace of mind; others find equivalent aftermarket filters at lower cost and see no difference in performance or engine wear.
Key Takeaways
- The factory filter for all 2025 Ram 1500 engines is the Mopar 68157291AA, a spin-on design that costs between $12 and $18 depending on where you buy it.
- Aftermarket filters from Fram, Motorcraft, ACDelco, and Bosch are compatible and often cost $8 to $14, though you should verify the part number matches your engine variant.
- Filter changes are due every 10,000 miles or 12 months under normal driving, or every 5,000 miles if you tow frequently or drive in severe conditions.
- The filter location on the 2025 Ram 1500 is on the driver's side of the engine block, accessible from above without removing the wheel or undercarriage panels.
OEM versus aftermarket: cost and performance trade-offs
The Mopar 68157291AA carries a list price of $14 to $18 at most Ram dealerships, though online retailers often discount it to $12 to $15. Aftermarket equivalents typically cost $8 to $14. The price difference reflects manufacturing, distribution, and brand markup rather than a meaningful difference in filtration quality for most owners. Both OEM and major aftermarket filters meet the same SAE and ISO standards for micron rating and flow capacity.
The practical difference lies in availability and warranty. A Mopar filter is may provide to be in stock at any Ram dealership and carries the factory warranty on your truck if a filter defect causes engine damage — a rare event. Aftermarket filters are widely available at auto parts stores, big-box retailers, and online, often with same-day pickup. If you change your own oil, aftermarket filters are usually easier to source on short notice. If you use a quick-lube shop, they typically stock one or two aftermarket brands and may charge a small upcharge if you insist on OEM.
How to verify the correct filter for your specific engine
The 2025 Ram 1500 comes with three different gasoline engines, and while all use the same Mopar filter part number, confirming your engine type takes 30 seconds. Open your owner's manual to the maintenance schedule page or the engine specifications section. You will see your engine listed as 3.6L V6, 5.7L V8, or 5.7L V8 eTorque. All three use the Mopar 68157291AA.
If you are shopping for an aftermarket filter, enter your engine size and year into the filter manufacturer's website or call the parts counter. Fram, for example, lists their equivalent as the Fram PH8A or Fram Tough Guard TG8A depending on the product line. Motorcraft lists theirs as FL-2051-B. The part number matters because a filter designed for a different truck or engine may have a different thread size or bypass valve setting, which could affect oil pressure or flow. When in doubt, ask the parts associate to confirm the filter fits a 2025 Ram 1500 before you buy.
Where the filter sits and what you need to change it
On the 2025 Ram 1500, the oil filter is mounted vertically on the driver's side of the engine block, just below the intake manifold and above the oil pan. You can reach it from above the engine without removing wheels, splash guards, or undercarriage panels. This location makes the 1500 easier to service than some trucks where the filter hangs underneath and requires you to get under the vehicle.
To change the filter, you will need an oil filter wrench (a socket-style or band-style wrench, typically $8 to $15), a drain pan to catch old oil, and a rag or paper towels. The filter wrench grips the filter body so you can unscrew it by hand without stripping the filter or your hands. Hand-tighten the new filter until the rubber gasket touches the mounting surface, then turn it an additional three-quarter turn — do not over-tighten. Over-tightening can crack the gasket and cause a leak, or make the filter impossible to remove next time.
Maintenance intervals and when to change your filter
Ram's recommended oil change interval for the 2025 Ram 1500 is 10,000 miles or 12 months, whichever comes first, under normal driving conditions. If you tow a trailer, drive in severe dust or high-temperature conditions, or make frequent short trips, Ram recommends every 5,000 miles or 6 months. The filter should be changed every time you change the oil — it is not a multi-change component.
Your truck's onboard computer tracks oil life and displays a message on the dashboard when service is due. This message is based on driving patterns and engine load, not just mileage, so it may appear before or after 10,000 miles depending on how you drive. Changing the filter at the interval shown on your dashboard keeps your engine within warranty and maintains the oil system's ability to remove contaminants and heat.
Synthetic versus conventional oil and filter compatibility
The 2025 Ram 1500 uses 5W-30 synthetic oil from the factory. The Mopar filter and all major aftermarket filters are compatible with both synthetic and conventional 5W-30 oil. The filter itself does not care what type of oil flows through it — the difference is in how long the oil lasts before it breaks down. Synthetic oil can go longer between changes (some owners report 12,000 to 15,000 miles with synthetic), but Ram's official interval remains 10,000 miles regardless of oil type.
If you switch from synthetic to conventional oil or vice versa, you do not need a different filter. The same Mopar 68157291AA or equivalent aftermarket filter works with either. The only consideration is that if you use conventional oil, you should stick to the 5,000-mile interval for towing or severe driving, because conventional breaks down faster under heat and load than synthetic.
Where to buy and what to expect to pay
The Mopar 68157291AA is available at any Ram dealership parts department, typically for $12 to $18 depending on location and current promotions. Online retailers including Amazon, RockAuto, and Walmart stock it for $12 to $15 with free shipping on orders over a minimum amount. Local auto parts stores including AutoZone, O'Reilly, and NAPA carry equivalent aftermarket filters in stock, usually for $8 to $14, and offer same-day pickup at most locations.
If you are having the oil change done at a shop, ask what filter they use and whether there is an upcharge for OEM. Most quick-lube shops include a standard aftermarket filter in the service price ($30 to $50 for a full oil change) and charge $5 to $10 extra if you request Mopar. Independent mechanics often have a choice of filters and can order OEM if you ask in advance. Dealership service departments use Mopar filters as standard and include the cost in their oil change package, which typically runs $60 to $90 depending on whether you also need other fluids topped off.
Frequently Asked Questions
Can I use a different filter if the Mopar is out of stock?
Yes. Any filter listed as compatible with a 2025 Ram 1500 gasoline engine will work. Fram PH8A, Motorcraft FL-2051-B, and ACDelco PF2232 are common equivalents. Verify the part number with the parts associate before you buy to may support it fits your engine size. The filter should cost within $2 to $4 of the Mopar price.
How tight should I screw the new filter on?
Hand-tighten the filter until the rubber gasket makes contact with the mounting surface, then turn it an additional three-quarter turn. Do not use the filter wrench to tighten — only to remove the old filter. Over-tightening can crack the gasket and cause leaks or make removal difficult next time.
What happens if I use the wrong filter size?
A filter with the wrong thread size will not fit the mounting surface. A filter with the wrong bypass valve setting could allow unfiltered oil to circulate if the filter clogs, or restrict oil flow if the valve opens too easily. Always confirm the part number matches your engine before installation.
Do I need to change the filter if I only drive a few hundred miles a month?
Yes. Ram recommends a filter change every 12 months even if you do not reach 10,000 miles. Oil degrades over time from moisture and oxidation, not just from mileage. A filter that sits in the engine for more than a year can become less effective at removing contaminants.
Is the Mopar filter worth the extra cost over aftermarket?
For most owners, no. Major aftermarket filters meet the same performance standards and cost $4 to $6 less. The Mopar filter is worth choosing if you value the factory warranty or prefer to keep all service records with the dealership. Otherwise, a Fram or Motorcraft filter will perform identically.