The AC Delco PF48 is a spin-on oil filter that fits General Motors vehicles from the 1980s through early 2000s
The AC Delco PF48 is an original equipment manufacturer (OEM) oil filter made by General Motors' parts division. It's a spin-on design, meaning you twist it onto a threaded port on your engine rather than sliding it into a canister. The PF48 was the standard filter for many GM vehicles across several decades, and it remains available as a replacement part today.
This filter is not a universal fit — it only works on specific GM models and engine sizes. If you own a GM vehicle from that era, the PF48 may be your original filter or the correct replacement. If you own something else, this filter will not thread onto your engine.
AC Delco filters are sold through GM dealerships, auto parts stores, and online retailers. The PF48 typically costs between $8 and $15, depending on where you buy it and whether you're purchasing an OEM part or an aftermarket equivalent.
Key Takeaways
- The AC Delco PF48 is a spin-on oil filter designed for specific General Motors vehicles, primarily from the 1980s through early 2000s.
- You need to know your exact vehicle year, make, model, and engine size to confirm the PF48 is the correct filter for your car.
- Spin-on filters thread directly onto your engine and are removed and replaced as a complete unit during an oil change.
- AC Delco is General Motors' official parts brand, so PF48 filters sold under that label are OEM parts, not aftermarket alternatives.
Which GM vehicles use the PF48
The PF48 was used in a wide range of GM vehicles, but the specific years and models vary. Common applications include Chevrolet, Pontiac, Oldsmobile, and Buick models from the 1980s and 1990s, as well as some early 2000s vehicles. However, GM produced many engine sizes and configurations, and not every vehicle from those years used the PF48.
Your owner's manual will list the correct filter for your vehicle. You can also check the filter size by looking at your current filter — the part number is printed on the canister. If you're replacing a filter that's already on your car, matching the old part number is the safest approach.
If you don't have your manual or can't see the old filter clearly, call a GM dealership parts department with your vehicle identification number (VIN). They can tell you the correct filter in seconds. Auto parts stores can also cross-reference your VIN to the right filter, though accuracy varies by store.
How to install a spin-on oil filter
Spin-on filters are among the easiest engine components to replace. You'll need an oil filter wrench (a metal or rubber tool that grips the filter canister), a drain pan, and fresh oil. The entire process takes about five minutes once you've drained the old oil.
First, locate the filter on your engine — it's a cylindrical canister about the size of a soda can, usually mounted on the side or top of the engine block. Use the filter wrench to turn it counterclockwise until it comes free. Oil will spill out, so position your drain pan underneath. Once the filter is off, wipe the threaded port clean with a rag.
Before installing the new filter, coat the rubber gasket (the flat ring on top of the new filter) lightly with fresh oil. This helps create a watertight seal. Thread the new filter onto the port by hand until the gasket touches the engine, then turn it an additional three-quarter turn. Do not use the wrench to tighten it — hand-tight is correct. Over-tightening can damage the gasket and make removal difficult next time.
AC Delco versus aftermarket filters
AC Delco filters are OEM parts made by General Motors. Aftermarket filters from brands like Fram, Mobil 1, or Bosch are made by other manufacturers and sold under their own names. Both types are spin-on filters that fit the same threaded port, but they differ in construction and price.
OEM filters like the PF48 are engineered specifically for GM engines and meet GM's internal standards. Aftermarket filters are engineered to meet industry standards and often cost less. Neither choice is inherently better — many people use aftermarket filters without problems, while others prefer OEM parts for peace of mind.
The main practical difference is availability and cost. AC Delco filters are easiest to find at GM dealerships, while aftermarket options are stocked at every auto parts chain. If you're doing your own oil changes and want to stick with what the manufacturer specified, the PF48 is the right choice. If you want to save a few dollars and don't mind a different brand, an aftermarket equivalent will work.
Where to buy the AC Delco PF48
General Motors dealerships stock AC Delco filters and can order them if they don't have one in stock. This is the most direct route if you want to be certain you're getting an OEM part. Dealership prices are typically higher than retail, but you're may provide compatibility.
National auto parts chains like AutoZone, O'Reilly, Advance Auto Parts, and NAPA all carry AC Delco filters or can order them. You can search their websites by part number or vehicle information. Many stores offer same-day pickup if you order online.
Online retailers including Amazon, RockAuto, and eBay sell AC Delco filters, often at lower prices than brick-and-mortar stores. Shipping times vary, so check before ordering if you need the filter when ready. Always verify the part number matches your vehicle before completing a purchase.
Checking your current filter for the part number
The easiest way to confirm you need a PF48 is to look at the filter already on your engine. The part number is printed on the canister in large text. If it says PF48, you've found your answer. If it says something else, that's the correct part number for your vehicle.
If the old filter is too dirty to read or you're buying a filter before you've removed the old one, use your VIN. Every auto parts store can cross-reference your VIN to the correct filter. You'll need to provide the year, make, model, and engine size — all of which are on your registration or in your owner's manual.
Never guess at filter size. Installing the wrong filter can cause oil leaks, poor engine lubrication, or damage to the engine. Taking two minutes to confirm the part number saves you from a much larger problem later.
Frequently Asked Questions
Can I use an aftermarket filter instead of the AC Delco PF48?
Yes. Any spin-on filter designed for your specific vehicle will work, regardless of brand. Aftermarket filters from major manufacturers meet industry standards and are widely used. The choice between OEM and aftermarket is about preference and cost, not safety or function.
How often should I replace the PF48?
Most manufacturers recommend an oil and filter change every 3,000 to 7,500 miles, depending on your vehicle and oil type. Check your owner's manual for the interval specific to your car. Some newer synthetic oils extend the interval to 10,000 miles or more, but older vehicles typically use the shorter schedule.
What happens if I install the filter too tight?
Over-tightening can damage the rubber gasket, causing oil leaks when the engine heats up. It also makes removal difficult at the next oil change. Hand-tight plus three-quarter turn is the correct installation — the gasket will seal properly without extra force.
Is the AC Delco PF48 still made, or is it obsolete?
The PF48 is still manufactured and sold by AC Delco, though it's primarily stocked for older vehicles. If your car originally used this filter, you can still buy it new. Availability may vary by location, but major auto parts retailers can order it.
Do I need to drain the oil before replacing the filter?
You should drain the old oil during the same service when you replace the filter. Filters trap contaminants, and replacing the filter without changing the oil leaves dirty oil in your engine. A complete oil change includes draining the old oil, replacing the filter, and adding fresh oil.