The oil filter location and part number for your Equinox
The oil filter on a Chevy Equinox sits on the driver's side of the engine, below the cylinder head and above the subframe. You'll access it from underneath the vehicle — not from the top. The filter is a cartridge-style unit that screws into a housing cap, which means you remove the cap itself rather than a spin-on filter canister.
The part number depends on your model year. For 2010–2016 Equinoxes, GM part number 25183883 is the OEM filter. For 2017 and newer models, the part number is 25198917. Both are genuine Chevrolet filters, though aftermarket equivalents from Fram, Mobil 1, and Bosch are widely available and cost less. Check your owner's manual or ask your parts supplier to confirm the correct number for your specific year and engine size, since some model years had multiple engine options.
Key Takeaways
- The Equinox oil filter is a cartridge-style unit located on the driver's side of the engine, accessed from underneath the vehicle.
- Genuine Chevrolet part numbers are 25183883 (2010–2016) and 25198917 (2017 and newer), but aftermarket filters from major brands work and cost less.
- Replacing the filter requires removing the housing cap, not unscrewing a spin-on canister, which changes the procedure slightly.
- The job takes 15 to 30 minutes if you have basic tools and a way to safely lift the vehicle or access the underside.
What you need to do the job yourself
You'll need a filter wrench (usually a 74 mm or 86 mm socket-style wrench, depending on your model year), a new filter, a drain pan to catch old oil, and a jack or ramps to lift the vehicle safely. Some people use an oil filter socket on a ratchet instead of a dedicated wrench — either works. You also need a way to dispose of the old filter; most auto parts stores take them for free if you buy a new one there.
Before you start, let the engine cool for at least five minutes after running. The oil and filter housing will be hot. Locate the plastic undertray on the driver's side and remove the bolts holding it in place — you may need to remove the entire tray or just peel back a section to reach the filter housing. Once exposed, use your wrench to turn the housing cap counterclockwise and unscrew it by hand once it's loose enough to grip.
Step-by-step replacement process
Unscrew the housing cap and set it aside. The old filter cartridge will come out with it or remain in the housing — pull it out by hand if it stays behind. Inspect the rubber seal on the cap; if it's cracked or hardened, replace the cap itself (GM part 25183884 for 2010–2016 models). Clean the inside of the housing with a clean rag to remove any debris or old seal material.
Insert the new filter cartridge into the housing, making sure it seats fully. Screw the housing cap back on by hand first, then use your wrench to tighten it. Don't over-tighten — snug is enough. The cap should be hand-tight plus a quarter turn with the wrench. Reinstall the undertray, lower the vehicle, and start the engine to check for leaks around the housing cap. Let it run for 30 seconds, then turn it off and wait a minute before checking the oil level on the dipstick.
When to replace the filter during an oil change
Chevrolet recommends replacing the oil filter every time you change the oil. For most Equinoxes, that's every 7,500 miles or six months, whichever comes first, if you use conventional oil. If you use synthetic oil, the interval extends to 10,000 miles or 12 months. Some newer models with advanced oil-life monitoring systems can go longer — check your owner's manual for the exact interval your vehicle uses.
Replacing the filter at every oil change ensures you're removing accumulated dirt and metal particles from the engine. Skipping the filter replacement saves a few dollars but defeats the purpose of the oil change, since the old filter will continue to circulate contaminants through fresh oil.
Aftermarket versus OEM filters for your Equinox
Genuine Chevrolet filters cost between $12 and $18, depending on where you buy them. Aftermarket filters from Fram, Mobil 1, Bosch, and ACDelco (GM's own secondary brand) typically cost $8 to $14. All of these brands meet or exceed GM's filtration standards and carry the same warranty coverage. The main difference is that OEM filters are made to the exact specifications Chevrolet uses, while aftermarket filters are engineered to fit and perform similarly.
For most owners, an aftermarket filter is the better value. The performance difference is negligible over the life of your vehicle. If you prefer the certainty of an OEM part or have a specific brand loyalty, the extra cost is small enough that it won't affect your maintenance budget. What matters more is replacing the filter on schedule, regardless of which brand you choose.
Common mistakes to avoid
The biggest mistake is over-tightening the housing cap. The cartridge filter doesn't need a lot of force to seal — hand-tight plus a quarter turn is the rule. Over-tightening can crack the cap or damage the rubber seal, which will cause leaks. Another common error is forgetting to clean the inside of the housing before installing the new filter. Old seal material or debris left behind can prevent the new filter from seating properly.
Some owners also forget to check that the rubber seal on the cap is intact. If the seal is cracked or missing, the new filter won't seal correctly and oil will leak. If you're unsure whether the seal looks good, buy a replacement cap at the same time you buy the filter — it's inexpensive insurance. Finally, don't skip the leak check after you finish. Start the engine, let it run for 30 seconds, and look underneath for drips before you drive the vehicle.
Tools and parts checklist
| Item | Purpose | Notes |
|---|---|---|
| Filter wrench (74 mm or 86 mm) | Remove and install the housing cap | Socket-style or strap wrench both work |
| New oil filter cartridge | Replace the old filter | OEM or aftermarket, depending on preference |
| Replacement housing cap seal | may support a proper seal (optional) | Only needed if the old seal is damaged |
| Drain pan | Catch old oil during removal | Any container large enough to hold a few quarts |
| Clean rags or paper towels | Clean the housing interior | Lint-free preferred to avoid debris |
| Jack or ramps | Safely lift the vehicle | Essential for accessing the underside |
Frequently Asked Questions
Can I replace just the filter without changing the oil?
Technically yes, but it's not recommended. The filter and oil work together — old oil loses its ability to protect the engine, and a new filter in old oil won't improve performance much. If you're between oil changes and the filter is visibly damaged or leaking, replace it. Otherwise, wait and do both at the same time.
How do I know if my filter is clogged?
A clogged filter usually triggers the oil pressure warning light on your dashboard. If the light comes on while driving, pull over safely and check your oil level first — low oil is the most common cause. If the level is normal, the filter may be clogged and you should have it inspected or replaced when ready. Driving with a clogged filter can damage the engine.
What's the difference between the 74 mm and 86 mm wrench sizes?
Different Equinox model years and engine sizes use different filter housings. The 74 mm wrench fits 2010–2016 models with the 2.4L engine, while the 86 mm fits some 2017 and newer models. Check your owner's manual or call a Chevrolet dealer with your VIN to confirm which size you need before buying the wrench.
Do I need to replace the housing cap seal every time?
No, the seal usually lasts several filter changes. Inspect it each time you replace the filter — if it's still soft and flexible, it's fine. If it's cracked, hardened, or flattened, replace the cap. A damaged seal will cause oil leaks even if you install the new filter correctly.
Can I take my Equinox to a shop instead of doing this myself?
Yes. Most quick-lube shops and dealerships offer oil and filter changes for $40 to $80, depending on the oil type and location. If you're not comfortable working under the vehicle or don't have the tools, a shop is a reasonable choice. The cost is low enough that it's worth paying for peace of mind if you're unsure about the procedure.