What Fram Cross Reference Numbers Tell You
A Fram cross reference number is a tool that matches a Fram oil filter to your specific vehicle. Instead of hunting through part numbers, you enter your car's year, make, and model into Fram's system, and it returns the exact Fram filter that fits. The cross reference also shows you equivalent filters from other brands — useful if you want to compare prices or switch brands.
Fram publishes these cross references in three places: their official website (fram.com), the packaging of Fram filters themselves, and through auto parts retailers like AutoZone, O'Reilly, and NAPA. Each source pulls from the same database, so the result should be identical no matter where you look it up.
The cross reference is not a recommendation about which filter is best for your vehicle — it is straightforward a compatibility match. A filter that fits is not necessarily the right choice for your driving conditions, oil type, or maintenance schedule. That decision comes from your owner's manual and your mechanic's input.
Key Takeaways
- Fram cross references match your vehicle's year, make, and model to a specific Fram filter part number that will physically fit your engine.
- You can look up a cross reference for free on Fram's website, on the filter box itself, or through any major auto parts retailer.
- The cross reference also shows equivalent filters from Mobil 1, Motorcraft, Purolator, and other brands so you can compare prices across manufacturers.
- Finding the right part number matters because oil filters vary in thread size, bypass valve pressure, and micron rating — using the wrong one can damage your engine.
How to Use Fram's Online Cross Reference Tool
Go to fram.com and look for the "Find a Filter" or "Cross Reference" link, usually in the main navigation. Click it and you will see a form asking for your vehicle's year, make, model, and engine size. Fill in each field — the engine size matters because some vehicles offer multiple engine options that need different filters.
Once you submit, the tool returns your Fram part number and a list of equivalent filters from other brands. Write down the Fram number or take a screenshot. This is the part number you will give to a parts counter or search for online. The tool also shows you the filter's specifications: thread size, bypass valve setting, and whether it is a standard or high-mileage formula.
If you do not know your engine size, check your owner's manual or look it up on your vehicle's door jamb sticker or under the hood. The manual is the most reliable source. If you are still unsure, call a parts store with your VIN (vehicle identification number) and they can tell you the engine size in seconds.
Reading the Cross Reference on a Fram Filter Box
Every Fram filter box prints a cross reference chart on the back or side panel. This chart lists vehicle years and models down the left side, with corresponding Fram part numbers across the top. Find your vehicle in the left column, trace it to the right, and the number you land on is your filter.
The box also shows equivalent part numbers from competing brands — Mobil 1, Motorcraft, Purolator, and others — so you can see at a glance whether a different brand filter will fit. This is helpful if you are standing in the parts aisle and want to compare prices without looking anything up online.
One caution: the cross reference on the box is only accurate for that particular Fram filter model. A Fram Extra Guard box will have a different cross reference than a Fram Tough Guard box, even though both are Fram products. Make sure you are reading the chart for the specific filter you are considering.
Using Auto Parts Retailers to Cross Reference
AutoZone, O'Reilly, NAPA, and Advance Auto Parts all have free cross reference tools on their websites. Enter your vehicle information and the tool will show you Fram filters that fit, along with filters from other brands and their prices. This method is useful if you want to compare cost across multiple retailers without visiting each store.
You can also call or visit a parts store in person and give them your vehicle's year, make, model, and VIN. The counter staff will look up the correct Fram part number and can tell you whether it is in stock. Many stores will also tell you the price difference between Fram grades — Extra Guard, Tough Guard, Titanium — so you can decide which one fits your budget and driving habits.
Some retailers offer installation services, though most people do oil changes themselves or take the vehicle to a mechanic. If you are buying the filter to have someone else install it, confirm the part number with the person doing the work before you buy — they may have a preferred brand or a filter already in stock.
What the Fram Part Number Actually Means
A Fram part number like "PH3506" or "TG3506" is not random. The letters at the start indicate the filter line — PH is Extra Guard, TG is Tough Guard, XG is Xtended Guard, and so on. The numbers that follow are the filter's physical specifications: thread size, bypass valve pressure, and micron rating. Two filters with different numbers will not fit the same engine, even if they look similar.
The thread size is the most critical specification. An oil filter screws onto a threaded port on your engine. If the thread size is wrong, the filter will not screw on at all, or it will screw on but not seal properly and leak oil. This is why the cross reference exists — to make sure you get the exact thread size your engine needs.
The bypass valve pressure and micron rating matter for engine protection, but they are less likely to cause a physical installation problem. A filter with the wrong bypass pressure might not protect your engine as well under cold starts, and a filter with the wrong micron rating might let more dirt through. Both are reasons to use the cross reference rather than guessing, but neither will prevent the filter from screwing on.
Comparing Fram Filters Across Different Product Lines
Fram makes several filter lines at different price points, and the cross reference will show you the part number for each one. Extra Guard is the basic line and the cheapest. Tough Guard costs more and lasts longer between changes. Titanium is the premium line with the longest drain interval. All three will fit your vehicle if you use the correct cross reference for each line.
The choice between them depends on your budget and how often you want to change your oil. If your owner's manual calls for an oil change every 3,000 miles, an Extra Guard filter is fine. If you use synthetic oil and your manual allows 7,500 or 10,000 miles between changes, a Titanium filter is designed to last that long. The cross reference tool will show you the part number for whichever line you choose.
Do not assume that a more expensive Fram filter will fit better or work better than a cheaper one. The fit is determined by the thread size and bypass valve, which are the same across price lines for the same vehicle. The difference is in how long the filter media lasts before it clogs and the bypass valve opens. Spend more only if your driving habits or oil change interval justify it.
What to Do If You Cannot Find Your Vehicle in the Cross Reference
If you enter your vehicle information and the cross reference returns no results, check that you entered the year, make, model, and engine size correctly. A single digit wrong will produce no match. If you are certain the information is correct, your vehicle may be too new or too old for that particular Fram tool's database.
Call a Fram customer service line or visit a local auto parts store with your VIN. The parts counter can look up your vehicle in their system, which is often more current than the online tool. They can also tell you whether Fram makes a filter for your vehicle at all — some specialty or imported vehicles may not have a Fram option.
If Fram does not make a filter for your vehicle, the cross reference tool or the parts counter will suggest equivalent filters from other brands. Mobil 1, Motorcraft, Purolator, and Bosch all make filters for most vehicles. Use their cross reference tools the same way you would use Fram's, and you will find a compatible filter.
Frequently Asked Questions
Can I use a different Fram filter than the one the cross reference shows?
No. The cross reference shows the exact filter that fits your vehicle's engine. Using a different Fram part number means the thread size, bypass valve, or both will be wrong, and the filter will either not fit or will not seal properly. Always use the part number the cross reference returns for your specific vehicle.
Does the cross reference work for synthetic oil filters?
Yes. Fram makes synthetic and conventional filters, and the cross reference will show you the part number for both. The thread size and bypass valve are the same — the difference is in the filter media and how long it lasts. Use the cross reference for whichever type you choose.
What if I buy the wrong Fram filter by mistake?
Most auto parts retailers will accept a return if the filter is unopened and you have your receipt. If you have already opened it or installed it, the return policy depends on the store. Call the store where you bought it and ask. If you installed the wrong filter, remove it when ready and install the correct one — do not drive the vehicle.
Is the Fram cross reference the same at every retailer?
Yes. All retailers pull from the same Fram database, so the part number will be identical whether you look it up at AutoZone, NAPA, O'Reilly, or Fram's website. The price may differ between retailers, but the part number will not.
Can I cross reference a Fram filter if I only have the old filter?
Yes. Look at the part number printed on your old filter and search that number on Fram's website or any parts retailer. The search will show you the vehicle years and models that filter fits. If your vehicle is listed, you can buy the same part number again. If your vehicle is not listed, the old filter may have been the wrong one, and you should use the cross reference tool with your vehicle information instead.