The 15400-PLM-A02 is Honda's factory oil filter for most Honda and Acura vehicles built between the mid-1990s and early 2010s

The 15400-PLM-A02 is the part number for a genuine Honda oil filter that fits a wide range of Honda and Acura models. It is not a universal filter—it is engineered specifically for Honda engines, with internal dimensions, bypass valve settings, and media composition matched to how those engines circulate and clean oil. When you buy this part number new from a Honda dealer or authorized supplier, you get a filter that has passed Honda's manufacturing standards and will perform exactly as the engine was designed to expect.

This filter is commonly found in Honda Civics, Accords, CR-Vs, Odysseys, and Acura TSX and TL models, though not every year of every model uses it. The best way to confirm your vehicle takes this filter is to check your owner's manual or ask a Honda dealer for your specific year and engine size. Using the wrong filter—even one that physically threads on—can leave your engine with inadequate oil flow or poor filtration.

Key Takeaways

  • The 15400-PLM-A02 is a genuine Honda part designed for specific Honda and Acura engines, not a one-size-fits-all filter.
  • This filter contains a bypass valve that opens if oil becomes too thick or the filter clogs, preventing engine starvation but signaling that service is overdue.
  • Genuine Honda filters cost more than aftermarket alternatives but are built to Honda's exact specifications and carry no risk of fitment or performance mismatch.
  • The filter should be replaced every oil change interval recommended in your owner's manual, typically 3,000 to 10,000 miles depending on your vehicle and oil type.
  • Counterfeit versions of this part number exist; buying from a Honda dealer or certified parts supplier reduces the risk of receiving a filter that does not meet Honda standards.

What happens inside a Honda oil filter during an oil change

An oil filter does two jobs: it traps particles that wear away from engine metal, and it lets clean oil flow to every bearing, piston, and valve. The 15400-PLM-A02 uses a pleated paper media—thousands of tiny folds that create surface area for oil to pass through while particles get stuck. As the filter fills with debris over thousands of miles, the pressure difference across the media increases. Eventually, if you ignore the service interval, the media becomes so clogged that oil cannot flow fast enough.

This is where the bypass valve comes in. When pressure builds too high, the bypass valve opens and lets unfiltered oil flow directly to the engine rather than letting the engine starve for oil. This is a safety feature, not a sign that the filter is still working well. If the bypass opens, your engine is running on dirty oil, and metal particles are circulating through bearings and cylinders. This is why the oil change interval exists: to replace the filter before the bypass ever needs to open.

The 15400-PLM-A02 is calibrated so its bypass valve opens at the pressure and flow rate Honda engines expect. An incorrect filter might have a bypass valve that opens too early (wasting filtration) or too late (risking engine damage if the filter clogs faster than expected). This is why using the correct part number matters, even though other filters might physically fit.

Genuine Honda filters versus aftermarket alternatives

Aftermarket filters—made by companies like Fram, Mobil, or Bosch—are cheaper and widely available. Many of them will fit your Honda and will filter oil reasonably well. The trade-off is that they are not built to Honda's exact specifications. An aftermarket filter might have a slightly different bypass pressure, a different media composition, or a different anti-drainback valve design. None of these differences will necessarily cause a problem, but none of them were tested in your specific engine.

A genuine Honda 15400-PLM-A02 costs more—typically $8 to $15 depending on where you buy it—but it was designed in Honda's engineering labs for Honda engines. If something goes wrong with an engine, and the filter is found to be the cause, a genuine part protects you because it meets the manufacturer's specification. An aftermarket filter puts the burden on you to prove it was not the cause of the failure.

For routine oil changes, many owners use aftermarket filters without incident. For peace of mind and to match what Honda engineers tested, a genuine filter is the safer choice, especially if your vehicle is still under warranty or if you plan to keep it long-term.

How to identify a genuine 15400-PLM-A02 and avoid counterfeits

Counterfeit automotive parts are common online and at some discount retailers. A fake 15400-PLM-A02 might have the correct part number printed on the outside but contain inferior media, a poorly calibrated bypass valve, or even be a completely different filter inside the box. The safest way to avoid counterfeits is to buy from a Honda dealer, an authorized Honda parts distributor, or a major retailer with a strong return policy and supplier verification.

If you buy online, check the seller's credentials. Authorized Honda parts suppliers will display their status on their website. If you receive a filter and the box feels flimsy, the printing looks blurry, or the filter itself feels unusually light, those are signs of a counterfeit. A genuine filter has a sturdy metal canister, clear printing, and a solid feel when you hold it.

The part number itself—15400-PLM-A02—is specific enough that searching it on a Honda dealer's website will show you the exact filter and confirm it fits your vehicle. This also gives you the dealer's price, which you can use as a reference when shopping elsewhere.

When to replace the filter and what to do with the old one

Your owner's manual specifies the oil change interval for your vehicle. For most Honda models, that is every 3,000 miles with conventional oil or every 5,000 to 10,000 miles with synthetic oil, though some newer models go longer. The filter should be replaced at every oil change, not every other one. A filter that has been in service for 10,000 miles is saturated with particles and has lost most of its filtering ability, even if it is not visibly clogged.

When you replace the filter, the old one contains used oil and metal particles. Do not throw it in the trash. Take it to a recycling center, an auto parts store that accepts used filters, or a quick-lube shop—most will take it for free. Some shops will crush the filter to drain the remaining oil before recycling the metal canister. This protects groundwater and recovers the metal for reuse.

Installation tips and common mistakes

Installing a filter is straightforward but straightforward to get wrong. The filter threads onto a threaded port on the engine block. Before you install the new filter, coat the rubber gasket (the ring around the top) with a thin layer of fresh oil. This helps the gasket seal properly and makes removal easier next time. Do not use grease or old oil—fresh oil only.

Thread the filter on by hand until the gasket touches the engine block, then turn it another three-quarters of a turn. Do not use a wrench or filter wrench to tighten it—hand-tight is correct. Over-tightening crushes the gasket and makes the filter nearly impossible to remove next time. It also risks damaging the threads on the engine block.

After installation, start the engine and let it idle for 30 seconds, then shut it off. Wait a minute and check the filter for leaks. If oil is dripping from where the filter threads on, the gasket did not seal—remove the filter, wipe the threaded port clean, explore fresh oil to the gasket again, and reinstall. A properly installed filter should not leak at all.

Why filter quality affects engine life and reliability

An engine is a precision machine. Bearings, pistons, and cylinder walls are machined to tolerances measured in thousandths of an inch. When metal particles circulate in the oil, they act like sandpaper, wearing away those surfaces. A good filter removes particles before they can do damage. A poor filter or a clogged filter lets particles through, and the damage compounds over time.

The difference between a genuine filter and a poor-quality aftermarket filter might not show up in the first oil change or the first year. But over 100,000 or 200,000 miles, the cumulative effect of slightly better filtration adds up. Engines that have been serviced with genuine filters and proper oil tend to run cleaner, have less sludge buildup, and last longer than engines that have been serviced with low-quality filters and neglected intervals.

This is why Honda recommends the 15400-PLM-A02 for your specific engine: it is part of the system that keeps your engine running reliably for the life of the vehicle. Skipping it in favor of a cheaper filter is a small saving now that can cost you thousands in engine repairs later.

Frequently Asked Questions

Will a different Honda filter work if I cannot find the 15400-PLM-A02?

Do not substitute without checking your owner's manual or calling a Honda dealer. Some Honda models use different filter part numbers, and using the wrong one risks poor filtration or bypass valve problems. If the 15400-PLM-A02 is unavailable, a dealer can tell you what alternatives, if any, are acceptable for your specific engine.

Can I use an aftermarket filter instead of the genuine Honda filter?

Many aftermarket filters will fit and function, but they are not engineered to Honda's specifications. If you choose an aftermarket filter, buy from a reputable brand and check that it is rated for your exact engine size and model year. Genuine Honda filters remove the guesswork and carry no fitment risk.

How do I know if my filter is clogged before the next oil change?

A clogged filter usually triggers no warning light until the bypass valve opens, at which point the engine is already running on dirty oil. The best practice is to follow your owner's manual interval strictly. If you drive in dusty conditions or tow frequently, ask a Honda dealer whether a shorter interval is recommended for your use.

What is the difference between the 15400-PLM-A02 and other Honda filter part numbers?

Different Honda engines use different filters based on their oil flow rate, bypass pressure, and physical size. The part number tells you which filter is correct for your engine. Using a filter designed for a different engine can result in poor filtration or oil starvation. Always confirm the correct part number for your vehicle before purchasing.

Is it safe to buy a used or refurbished 15400-PLM-A02?

No. Oil filters cannot be cleaned and reused safely—the media becomes saturated with particles and the bypass valve can stick. Always use a new filter at each oil change. A used filter offers no savings worth the risk to your engine.