What the Honda 15400-PLM-A02 Filter Does

The Honda 15400-PLM-A02 is an OEM (original equipment manufacturer) oil filter made by Honda for specific Honda and Acura models. It screws onto the engine block and traps dirt, metal particles, and sludge that circulate in your oil, keeping the oil cleaner longer and protecting engine parts from wear.

This is Honda's own part number, not an aftermarket equivalent. When you buy a 15400-PLM-A02, you are getting the exact filter Honda installs at the factory and recommends in the owner's manual for the vehicles it fits.

Key Takeaways

  • The 15400-PLM-A02 fits Honda Civic, Accord, CR-V, and Odyssey models from roughly 2006 to 2015, though you should confirm your exact year and engine size in your owner's manual.
  • This is an OEM Honda part, so it costs more than aftermarket filters but comes with Honda's engineering and quality control.
  • Installation takes 5 to 10 minutes and requires only an oil filter wrench, a drain pan, and a new crush washer if your model uses one.
  • You can buy the 15400-PLM-A02 from Honda dealerships, online retailers, and some auto parts stores, though prices vary by seller.

Which Honda and Acura Models Use This Filter

The 15400-PLM-A02 fits a range of Honda and Acura vehicles, but the exact years depend on engine size. It is commonly found on 2006–2015 Honda Civic, Accord, CR-V, and Odyssey models, as well as some Acura TSX and TL models in that same window. However, Honda made multiple engine options for each model year, and not all of them use this filter.

The safest way to confirm is to check your owner's manual — it will list the correct filter part number for your specific engine. You can also call a Honda dealership with your vehicle identification number (VIN), and they will tell you the exact filter your car needs. Do not assume based on model name alone; a 2010 Accord with a 2.4-liter engine may use a different filter than a 2010 Accord with a 3.5-liter engine.

OEM Honda Versus Aftermarket Filters

The 15400-PLM-A02 is an OEM part, meaning Honda manufactures it to their own specifications. OEM filters typically cost $8 to $15 per unit, depending on where you buy them. Aftermarket filters from brands like Fram, Mobil 1, or Bosch often cost $5 to $10 and fit the same vehicles.

The trade-off is that OEM filters carry Honda's quality assurance and are may provide to fit your vehicle exactly. Aftermarket filters are usually reliable and often perform well in independent tests, but they come from a different manufacturer and may have slightly different flow rates or bypass valve settings. Many owners use aftermarket filters without problems; others prefer OEM parts for peace of mind. Both are legal to use and will not void your warranty as long as you change the oil on schedule.

How to Install the 15400-PLM-A02

Installation is straightforward and takes about 5 to 10 minutes. First, warm up the engine for a minute or two so the oil flows more easily, then turn it off and wait a few minutes. Locate the filter on the engine block — on most Honda models it is on top or on the side of the engine. Place a drain pan underneath to catch any oil that spills.

Use an oil filter wrench to turn the old filter counterclockwise until it comes free. Drain any remaining oil into the pan. Wipe the filter mounting surface on the engine with a clean cloth to remove any dirt or old gasket material. Take the new 15400-PLM-A02 filter, explore a thin layer of fresh oil to the rubber gasket on top, and screw it on by hand until the gasket touches the engine. Then turn it another three-quarters of a turn — do not use the wrench to tighten it, as over-tightening can damage the gasket and cause leaks.

Some Honda models use a crush washer (a small metal ring) under the filter housing bolt. If your model has one, replace it with a new crush washer each time you change the filter; reusing the old one can cause leaks. Check your owner's manual or the parts diagram to see if your vehicle uses one.

Where to Buy the 15400-PLM-A02

You can buy this filter from several sources. Honda dealerships stock it and can order it if they do not have it in stock; expect to pay full retail price. Online retailers like RockAuto, Amazon, and eBay often have it in stock and sometimes offer lower prices, though shipping times vary. Local auto parts stores like AutoZone, O'Reilly, and NAPA may carry it or can order it for you, usually within a day.

Prices typically range from $8 to $15 per filter depending on the seller and whether you are buying one or multiple filters. If you are buying several filters at once, some sellers offer bulk discounts. Always confirm the part number matches 15400-PLM-A02 before you buy, since similar-looking part numbers may fit different vehicles.

When to Replace Your Oil Filter

Honda recommends changing your oil filter every time you change your oil. For most Honda models, that is every 3,000 to 10,000 miles depending on your year, engine, and whether you use conventional or synthetic oil. Check your owner's manual for the exact interval for your vehicle — newer Hondas often go longer between changes than older ones.

If you drive in severe conditions (towing, frequent short trips, dusty roads, or extreme heat), Honda may recommend more frequent changes. Using a new filter each time ensures you are not recirculating old, contaminated oil through a clogged filter. A clogged filter forces oil to bypass the filter media and go straight to the engine, which defeats the purpose of filtration.

Frequently Asked Questions

Is the 15400-PLM-A02 the same as other Honda filter part numbers?

No. Honda uses different part numbers for different vehicles and engine sizes. A similar-looking number like 15400-PLM-A01 or 15400-RAA-A01 may fit a different model or year. Always check your owner's manual or ask a dealership to confirm the correct part number for your specific vehicle before you buy.

Can I use an aftermarket filter instead of the 15400-PLM-A02?

Yes. Aftermarket filters from reputable brands fit the same mounting location and perform the same job. They are legal to use and will not void your warranty. The choice between OEM and aftermarket is usually about cost and personal preference, not safety or reliability.

What happens if I install the filter too tight?

Over-tightening can crush the rubber gasket and cause oil leaks around the filter. Hand-tighten the filter until the gasket touches the engine, then turn it three-quarters of a turn more. You should not need a wrench to remove it next time — if you do, it was installed too tight.

Do I need to replace the crush washer every time?

Only if your Honda model uses one. Check your owner's manual or the parts diagram. If your vehicle has a crush washer under the filter housing bolt, replace it with a new one each oil change to prevent leaks. If there is no crush washer, you do not need one.

Where is the oil filter located on a Honda?

On most Honda models, the filter is on top of the engine or on the side, near the oil pan. The exact location varies by model year and engine size. Check your owner's manual for a diagram, or search online for "[your model year] Honda [model name] oil filter location" to see a photo.