The reset process depends on your vehicle's year, make, and model
The oil change light (also called the service reminder or maintenance light) resets differently across manufacturers. Some vehicles reset automatically when you turn the key a certain way. Others require you to hold a button on the dashboard. A few need the engine running while you navigate a menu on the instrument cluster. The method that works for a Honda will not work for a Ford, and a 2015 model may differ from a 2020 model of the same brand.
The fastest way to find your exact reset procedure is to check your owner's manual — it will have the steps for your specific vehicle. If you do not have the manual, you can read it free from the manufacturer's website using your vehicle identification number (VIN), or search "[your year/make/model] oil change light reset" and cross-reference the results against your dashboard layout.
Key Takeaways
- The reset method varies by manufacturer and model year, so your owner's manual is the most reliable source for the correct steps.
- Most resets involve turning the key to the "On" position without starting the engine, then pressing and holding a stalk or button until the light blinks and disappears.
- Some vehicles reset automatically after you start the engine following an oil change, while others require manual intervention every time.
- If the light comes back on within a few hundred miles of an oil change, the reset may not have worked, or the sensor itself may need attention.
Common reset methods by manufacturer
General Motors (Chevy, GMC, Cadillac): Turn the key to "On" without starting the engine. Press the accelerator pedal to the floor three times within ten seconds, then turn the key back to "Off." The light should reset when you start the engine next.
Ford: Turn the key to "On" without starting. Press the brake pedal and use the left arrow button on the steering wheel to navigate to "Settings," then "Vehicle," then "Oil Life." Press the right arrow or "OK" button to reset. The exact menu path varies by model year and infotainment system.
Honda and Acura: Turn the key to "On" without starting. Press the select/reset button on the turn signal stalk repeatedly until you see "Oil Life" on the dashboard display. Press and hold the button for about ten seconds until the display shows "Oil Life 100%." Release the button.
Toyota and Lexus: Turn the key to "On" without starting. Press the odometer/trip button on the instrument cluster until the odometer display appears. Turn the key to "Off," then back to "On" while holding the odometer button. Hold until the display shows "000000" or a reset confirmation, then release.
Nissan: Turn the key to "On" without starting. Press the accelerator pedal to the floor slowly three times within five seconds. The light should blink and go out. If using a push-button start, press the brake and push the start button twice to reach "On" mode, then repeat the pedal steps.
What to do if the light will not reset
If you have followed the correct procedure and the light remains on or comes back on within a few hundred miles, the reset may not have taken. Try the procedure again, making sure you are not starting the engine during the process — the engine must be off or in "On" mode only.
If the light still does not reset after a second attempt, the issue may be with the oil pressure sensor or the vehicle's onboard diagnostic system rather than a straightforward reset failure. A mechanic can read the diagnostic trouble codes using a scanner to determine whether the sensor is faulty or whether there is an actual oil pressure problem. Do not ignore a persistent oil change light, because it may indicate low oil level or a genuine service need rather than a stuck reminder.
When to reset versus when to ignore the light
Reset the light only after you have actually changed the oil and filter. If the light comes on and you have not yet serviced the vehicle, changing the oil is the first step — resetting without servicing will mask a legitimate maintenance need.
If you change your own oil, reset the light when ready after you finish. If a shop changes your oil, ask them to reset it before you leave, or do it yourself at home using the procedure for your vehicle. Some shops reset it automatically; others leave it for you to do.
If the light comes on again within 500 miles of a reset, or if it stays on after you have reset it twice, have the oil level and pressure checked. A faulty sensor, an oil leak, or an engine problem could be the cause.
Finding your owner's manual if you do not have it
Your vehicle's owner's manual contains the exact reset procedure for your model. You can find it free online through the manufacturer's website. Go to the main website for your brand (Toyota.com, Ford.com, GM.com, Honda.com, Nissan.com, etc.) and look for an "Owner Resources," "Manuals," or "Support" section.
You will need your VIN to read the correct manual. The VIN is printed on your registration, insurance card, and the driver's side door jamb. Once you have the manual, search for "oil change," "service reminder," or "maintenance light" in the index or search function to find the reset instructions for your specific model year.
If the manufacturer's website does not have your manual available, try searching the VIN on third-party manual sites like Manuals.Plus or YourMechanic.com, though you should verify the information matches your dashboard before following it.
Frequently Asked Questions
Can I reset the oil change light without changing the oil?
Technically yes — the reset procedure works regardless of whether you have serviced the vehicle. But you should not do this. The light is a maintenance reminder tied to your engine's service schedule. Resetting it without changing the oil defeats its purpose and can lead to engine damage from running on old oil.
Why does my oil change light come back on after I reset it?
The most common reason is that the reset did not complete properly — you may have started the engine too early or skipped a step. Try the procedure again without starting the engine. If it happens repeatedly, the oil pressure sensor may be faulty and need replacement, or the vehicle may have a genuine oil pressure or level problem.
Does the oil change light reset automatically on newer cars?
Some do, but not all. Many newer vehicles with push-button start and digital dashboards reset automatically when you start the engine after an oil change, while others still require manual reset. Check your owner's manual or ask your service shop whether your specific model resets on its own.
What if I cannot find the reset button or stalk on my dashboard?
Different manufacturers put controls in different places — some use the turn signal stalk, others use buttons on the steering wheel, and some use the odometer button on the instrument cluster. Your owner's manual will show you exactly where the control is located and how to use it. If you cannot locate the manual, a dealership service department can reset it for you, usually at no charge.