Check your oil with the dipstick while the engine is cold and parked on level ground
The fastest way to check engine oil is to pull the dipstick, wipe it clean, reinsert it fully, then pull it out again and read the level against the markings. This takes about two minutes and tells you whether you need to add oil before your next drive. You need the engine off and the car sitting level — checking a warm engine gives a false reading because oil expands as it heats, and checking on a slope makes the level appear higher or lower than it actually is.
Most cars have a dipstick with a yellow or orange handle under the hood. Some newer vehicles use an electronic oil monitor instead, which displays the level on your dashboard. If you have an electronic system, check your owner's manual for how to access that reading — you typically scroll through a menu on the instrument cluster or infotainment screen.
Key Takeaways
- Park on level ground and wait at least five minutes after turning off the engine so the oil settles and cools.
- Pull the dipstick completely out, wipe it with a clean rag or paper towel, then reinsert it all the way before pulling it out to read the level.
- The oil level should sit between the minimum and maximum marks on the dipstick — adding oil when it drops to minimum prevents engine wear.
- If you cannot find the dipstick or your car has an electronic gauge, check your owner's manual or the manufacturer's website for your specific model.
- Check your oil every month or before long trips, and keep a quart of the correct oil type in your car in case you need to top off.
Locating the dipstick under your hood
Open your hood and look for a handle sticking up from the engine block. The handle is usually bright yellow, orange, or red and has a loop or ring you can grip. On most cars, the dipstick sits toward the front or side of the engine. If you cannot spot it when ready, trace the oil filler cap — a large threaded cap on top of the engine — and the dipstick is usually nearby.
Some vehicles hide the dipstick behind other components or tuck it toward the back of the engine bay. If you cannot find it after a careful look, consult your owner's manual or search your vehicle's year, make, and model online. The manual will show you exactly where it is and may include a diagram of the engine bay.
The correct steps to read the oil level
Turn off the engine and wait at least five minutes. This allows the oil to drain back into the pan and cool slightly, so you get an accurate reading. If you check when ready after driving, the oil is still hot and circulating through the engine, which makes the level appear lower than it actually is.
Grip the dipstick handle and pull it straight out. You will see oil coating the stick. Wipe the oil off completely using a clean rag, paper towel, or old cloth — do not use a tissue, which can shred and leave fibers behind. Reinsert the dipstick all the way until it seats fully in its tube. Pull it out again without twisting, and this time read where the oil level sits on the stick.
The dipstick has two marks: a minimum line (often labeled "MIN" or "LOW") and a maximum line (often labeled "MAX" or "FULL"). The oil should be between these two marks. If it is at or below the minimum mark, add oil. If it is above the maximum mark, you have overfilled the engine, which can damage the engine — in that case, you may need to have oil drained at a service center.
What to do if the oil level is low
If the level is below the minimum mark, you need to add oil. Locate the oil filler cap on top of the engine — it usually has an oil can symbol printed on it. Unscrew the cap by turning it counterclockwise. Keep it somewhere clean so you do not lose it or drop dirt into the opening.
Pour the correct oil type slowly into the opening. Check your owner's manual or the inside of the driver's door jamb for the oil specification your car needs — it will be listed as something like "5W-30" or "10W-40". Add about half a quart, then wait a minute for the oil to drain into the pan. Check the level again with the dipstick using the same process: wipe, reinsert, pull out, and read. Repeat until the level reaches the maximum mark. Screw the oil filler cap back on tightly.
Keep a quart of the correct oil in your car. If you are far from a service station and the oil level drops between checks, you can add a small amount to get home safely. Running the engine with oil below the minimum mark can cause damage over time.
How often to check your oil
Check your oil at least once a month, or before any long road trip. If your car is older, burns oil, or has high mileage, check it more often — every two weeks or even weekly. A car that burns oil will show a dropping level between oil changes, and catching it early prevents engine damage.
If you notice the oil level dropping quickly — more than a quart between checks — have the engine inspected. A rapid drop can signal an oil leak, worn piston rings, or a failing gasket. These problems are cheaper to fix early than to ignore until the engine seizes.
Electronic oil monitors and what they show
Many newer cars do not have a traditional dipstick. Instead, they use an electronic sensor that displays the oil level on your dashboard or infotainment screen. To check this reading, start the car and navigate to the oil level menu — this is usually under "Vehicle Information," "Settings," or "Maintenance" depending on the manufacturer. The display will show a percentage or a bar graph indicating how much oil remains.
Electronic monitors are convenient but less precise than a dipstick. They may not update when ready after you add oil, and they sometimes show a range rather than an exact level. If your electronic monitor shows low oil, you should still add oil the same way: locate the filler cap, pour in the correct type slowly, and check again after a minute. Some owners of electronic-only cars keep a dipstick-style oil level checker in the car as a backup.
Common mistakes to avoid when checking oil
Do not check the oil while the engine is running or when ready after you turn it off. The oil is circulating and hot, which makes the level appear lower than it really is. Always wait at least five minutes with the engine off and the car parked on level ground.
Do not forget to wipe the dipstick before reinserting it. If you skip this step, you are reading old oil from the previous check, not the current level. Wipe thoroughly with a clean cloth so no residue remains.
Do not overfill the engine. Adding oil above the maximum mark can cause the engine to work harder, create excess pressure, and damage seals. If you overfill by accident, you will need to have oil drained — do not straightforward drive the car hoping it will burn off the excess.
Do not use the wrong oil type. Using a heavier or lighter oil than your manual specifies can affect engine performance and fuel economy. Always check your owner's manual or the door jamb label before buying oil.
Frequently Asked Questions
Can I check my oil when the engine is warm but not hot?
It is better to wait until the engine is completely cold. A warm engine gives a false reading because the oil has expanded. If you must check a warm engine, do so at least 10 to 15 minutes after turning it off, and understand that the reading may be slightly lower than the true level.
What if I cannot find the dipstick on my car?
Many newer cars have electronic oil monitors instead of dipsticks. Check your owner's manual or the manufacturer's website for your vehicle's year, make, and model. You can also call a dealership service department — they can tell you in seconds whether your car has a dipstick or an electronic gauge.
How much oil should I add if the level is low?
Add about half a quart at a time, then check the level again. Most cars need between 4 and 6 quarts total, but the amount varies by engine size. Your owner's manual lists the total capacity. Adding slowly and checking between pours prevents overfilling.
Is it normal for oil level to drop between oil changes?
A slight drop is normal — engines consume a small amount of oil during normal operation. If the level drops more than a quart between oil changes, or if it drops noticeably within a few weeks, have the engine inspected for leaks or internal wear.
What type of oil should I buy if I need to top off?
Use the exact type listed in your owner's manual — typically something like 5W-30 or 10W-40. You can also find this information on a sticker inside the driver's door jamb. Using the wrong viscosity can affect engine performance and fuel economy.