The oil change light resets differently depending on your car's year, make, and model—some turn off automatically, others need a manual reset sequence, and a few require a dealer scan tool.
The light on your dashboard that says "Oil Change Due" or shows an oil can symbol is a service reminder, not a warning that something is wrong. Once you have changed your oil and filter, the light needs to be reset so it stops coming on. How you do this depends on what kind of system your car has. Some vehicles reset automatically after you drive a certain distance or number of engine starts. Others require you to hold a button or navigate a menu on your dashboard. A small number of newer cars need a technician with a diagnostic computer to clear it.
Resetting the light yourself takes between 30 seconds and five minutes and costs nothing. If you do not reset it, the light will stay on until the next scheduled service or until someone with the right tool clears it. This does not affect how your car runs, but it defeats the purpose of the reminder system.
Key Takeaways
- Check your owner's manual first, because the reset method is different for every manufacturer and sometimes different between model years of the same car.
- Most cars reset by turning the key to the "On" position without starting the engine, then holding down a stalk button or dashboard button for 10 to 15 seconds until the light blinks and goes out.
- Some vehicles reset automatically after you drive 100 to 500 miles following an oil change, so the light may disappear on its own.
- Newer luxury and electric vehicles sometimes require a dealer or independent shop with a scan tool to reset the light, which usually costs between $0 and $50.
How to reset the light on most gas-powered cars
The most common reset method works on many Honda, Toyota, Nissan, Ford, Chevrolet, and Dodge vehicles. Sit in the driver's seat with the engine off. Turn the key to the "On" position—the position where the dashboard lights come on but the engine does not start. Do not turn the key all the way to "Start."
Look for a button or stalk on the steering column or dashboard labeled "Reset," "Menu," "Sel," or with a symbol of a wrench or odometer. Press and hold this button for 10 to 15 seconds. The oil change light will blink once or twice, then go out. Turn the key back to "Off." The reset is complete. Start the engine and verify the light is gone.
If your car has a touchscreen or digital instrument cluster, you may need to navigate to a "Service" or "Maintenance" menu using buttons on the steering wheel or the screen itself. The owner's manual will show you which buttons to use and in what order.
Resetting the light on Toyota, Lexus, and Scion vehicles
Toyota and Lexus models often use a specific sequence. Turn the key to "On" without starting the engine. Press the odometer button on the instrument cluster repeatedly until the odometer display appears on your dashboard screen. Turn the key to "Off," then turn it back to "On" while holding down the odometer button. Hold it for three seconds. The light should reset.
Some newer Toyota models with a push-button start use a different method: press the start button twice without pressing the brake pedal so the dashboard powers on, then hold down the odometer button until the service light resets. If this does not work, check your owner's manual for your specific year and model, because Toyota has changed this process several times.
Resetting the light on Honda and Acura vehicles
Honda and Acura vehicles typically reset through the instrument cluster menu. Turn the key to "On" without starting the engine. Use the right arrow button on the steering wheel to scroll through the menu until you see "Oil Life" or "Maintenance." Press the center select button. Scroll down to "Reset" and press select again. The oil life will return to 100 percent and the light will go out.
Older Honda models may use a simpler method: turn the key to "On," press the select button on the steering wheel until "Oil Life" appears, then hold the select button for 10 seconds until the display resets to 100 percent.
Resetting the light on Ford, Lincoln, and Mazda vehicles
Ford and Lincoln trucks and SUVs often reset through the instrument cluster display. Turn the key to "On" without starting the engine. Press the left arrow button on the steering wheel until you see the maintenance menu. Press the center button to select it. Scroll to "Oil Change" or "Reset Service," then press and hold the center button for three seconds. The light will reset.
Mazda vehicles use a similar method: turn the key to "On," use the steering wheel buttons to navigate to the "Service" or "Maintenance" menu, select "Oil Change Reset," and hold the button until the display confirms the reset.
Resetting the light on Chevrolet, GMC, and Cadillac vehicles
General Motors vehicles reset through the driver information center on the dashboard. Turn the key to "On" without starting the engine. Press the up or down arrow button on the steering wheel to scroll through the menus until you see "Oil Life" or "Service Reminder." Press the select button in the center. Scroll to "Reset" and press select. The light will go out.
Some older Chevrolet and GMC trucks have a simpler method: turn the key to "On," press and hold the trip odometer reset button for five to ten seconds until the service light blinks and disappears.
When you need a scan tool to reset the light
Newer luxury vehicles from BMW, Mercedes-Benz, Audi, Porsche, and some high-end models from other manufacturers do not allow drivers to reset the service light manually. These cars require a diagnostic scan tool connected to the vehicle's computer system. An independent shop or dealership can do this in 15 to 30 minutes, usually for $0 to $50 depending on whether they charge a diagnostic fee.
Some electric vehicles and plug-in hybrids also require a scan tool reset because their service intervals are tied to battery management systems or regenerative braking wear calculations that a manual reset cannot address. If you own one of these vehicles, ask your service technician to reset the light when you have your oil changed, or plan to have it done at a shop that has the right equipment.
What to do if the light will not reset
If you have followed the correct reset sequence and the light is still on, the most common reason is that you did not hold the button long enough or you used the wrong button. Go back to your owner's manual and try again, this time counting to 15 slowly while holding the button down. Make sure the engine is completely off and the key is in the "On" position, not "Start."
If the light still will not go out, it is possible the light is not a service reminder but an actual warning that something is wrong with your oil system—low oil level, low oil pressure, or a sensor fault. Check your oil level with the dipstick while the engine is cold and parked on level ground. If the oil is low, top it up and try the reset again. If the oil level is normal and the light persists, have a shop scan the vehicle to see if there is a real fault code stored in the computer.
Frequently Asked Questions
Will the oil change light turn off by itself?
Some vehicles reset automatically after you drive 100 to 500 miles following an oil change, depending on the manufacturer. Most do not. Check your owner's manual to see if your car has automatic reset. If it does not, you will need to reset it manually or have it done at a shop.
Can I reset the oil change light without the owner's manual?
Yes, but it is harder. Try the most common method: turn the key to "On," find a button labeled "Reset" or "Menu" on the steering wheel or dashboard, and hold it for 10 to 15 seconds. If that does not work, search online for "[your year, make, model] oil change light reset" to find the specific steps. The owner's manual is faster and more reliable.
Does resetting the light mean my oil change is done?
No. Resetting the light only tells the car's computer that you have performed maintenance. It does not verify that you actually changed the oil or that the oil is clean. You must change the oil and filter first, then reset the light. Resetting without changing the oil defeats the reminder system and you may miss a service interval.
What if my car has a push-button start instead of a key?
Press the start button once or twice without pressing the brake pedal so the dashboard powers on but the engine does not start. Then follow the same reset sequence for your vehicle. Some push-button cars require you to press the button while holding the brake, so check your manual for the exact procedure.
How much does it cost to have a shop reset the oil change light?
If your car allows manual reset, it costs nothing—you do it yourself in a few minutes. If your car requires a scan tool, most independent shops charge $0 to $50, often as part of the oil change service at no extra cost. Dealerships may charge a diagnostic fee of $50 to $150 if you are not having other work done. Ask before you drop off the car.