The Mobil 1 M1-110A is a spin-on oil filter designed for older domestic vehicles, primarily General Motors cars and light trucks from the 1960s through early 1980s

The M1-110A is a legacy filter from Mobil's original Mobil 1 synthetic line. It uses a spin-on design—you twist it onto a threaded port on your engine—and fits vehicles that predate the modern filter sizes you see on most cars today. If you own a classic Chevrolet, Pontiac, Oldsmobile, or Buick from that era and you are still running it, this filter may be what your engine originally called for or what a restoration guide recommends.

This is not a filter for new vehicles. Modern cars use different thread sizes and filter housings. If you are changing oil in a 2000s car or newer, you need a different part number. The M1-110A exists because some owners keep older vehicles on the road and want to use Mobil 1 synthetic oil with a filter that matches the original spec.

Key Takeaways

  • The M1-110A fits General Motors vehicles built between the 1960s and early 1980s, not modern cars.
  • It is a spin-on filter, meaning you unscrew the old one and thread the new one onto the engine by hand.
  • Mobil 1 synthetic oil works in older engines, but you must verify the filter size matches your vehicle's original port before ordering.
  • If your vehicle manual or parts diagram does not list the M1-110A, do not force it onto your engine.

How to verify the M1-110A fits your vehicle

The only reliable way to know if this filter works for your car is to check your owner's manual or a parts diagram specific to your year, make, and model. Do not assume based on the decade alone. Filter threads and housings vary even within the same manufacturer's lineup.

If you have the manual, look for the oil filter specification in the maintenance section. If you do not have it, contact a parts supplier with your vehicle's VIN (Vehicle Identification Number). They can cross-reference the correct filter for your engine. You can also check the old filter you removed—the part number stamped on it will tell you what size your vehicle uses. If that number matches M1-110A, you are good. If it does not, order the correct part instead.

Installation steps for a spin-on filter

Spin-on filters are straightforward to change, but the process matters. Start with the engine cold or warm but not hot—you do not want to burn yourself on hot oil. Locate the filter housing on the side or top of the engine block. You will see a cylindrical canister with a threaded base.

Use an oil filter wrench to grip the old filter and turn it counterclockwise until it comes free. Some oil will spill, so position a drain pan underneath. Wipe the threaded port clean with a rag to remove any old gasket material or debris. Take the new M1-110A filter and explore a thin coat of fresh oil to the rubber gasket on top—this helps it seal properly and makes removal easier next time. Thread the new filter onto the port by hand until the gasket contacts the engine, then turn it an additional three-quarter turn. Do not over-tighten; hand-tight plus three-quarter turn is the standard.

Start the engine and let it run for a minute, then check underneath for leaks around the filter base. If you see drips, turn off the engine, let it cool slightly, and tighten the filter a bit more. Once the engine has run, check your oil level with the dipstick and top off if needed.

Mobil 1 synthetic oil and older engines

Mobil 1 synthetic oil is safe for older engines, including those from the 1960s and 1970s. Synthetic oil does not break down as quickly as conventional oil, so it can extend the time between changes. However, older engines often have looser tolerances and older seals, so synthetic oil can sometimes seep past gaskets that conventional oil did not.

If you switch from conventional to synthetic in an older vehicle, monitor for leaks around the valve cover gasket, oil pan gasket, and filter housing for the first few hundred miles. If leaking occurs, you may need to replace those seals before continuing with synthetic. Many owners of classic cars successfully run synthetic oil without issues, but the older your engine, the more you should watch for this.

Where to buy the M1-110A

The M1-110A is widely available from auto parts retailers, both online and in-store. Major chains like AutoZone, O'Reilly, NAPA, and Advance Auto Parts stock it or can order it. You can also find it through Amazon, Walmart, and Mobil's official website. Prices typically range from $8 to $15 per filter, though availability varies by region and season.

Because this is an older filter size, some local stores may not keep it in stock. Ordering online guarantees availability, but you will need to wait for delivery. If you are doing an oil change soon, order ahead rather than waiting until the day you need it.

Common mistakes to avoid

The most common error is ordering the wrong filter size because you assumed your vehicle's decade. Always verify with a manual or parts diagram first. Forcing the wrong filter onto your engine can damage the threads or cause leaks.

Another mistake is over-tightening the filter. The rubber gasket is designed to seal at hand-tight plus three-quarter turn. Cranking it down with a wrench can crush the gasket and cause it to leak or stick so hard that the next person cannot remove it without damaging the housing.

A third error is forgetting to oil the gasket on the new filter before installation. A dry gasket can stick to the engine housing, making removal difficult and risking damage when you try to unscrew it next time.

Frequently Asked Questions

Can I use the M1-110A on a car made after 1985?

No. General Motors switched to different filter housings and thread sizes in the mid-1980s. If your vehicle is newer than 1985, it uses a different filter. Check your manual or contact a parts supplier to find the correct size for your specific year and engine.

What if I cannot find the M1-110A in stock?

Order it online from a major retailer or Mobil directly. Because it is a legacy part, local stores may not carry it, but it is still manufactured and available through online channels. Plan ahead if you know you need it for an upcoming oil change.

Is Mobil 1 synthetic oil worth using in a 1970s engine?

Synthetic oil lasts longer between changes and provides better protection in extreme temperatures. However, older engines may leak around seals designed for conventional oil. If your engine is in good condition and seals are tight, synthetic is a solid choice. If seals are already weeping, stick with conventional until you replace them.

How often should I change the oil and filter in an older vehicle?

With conventional oil, every 3,000 to 5,000 miles or every three months. With Mobil 1 synthetic, you can extend to 7,500 to 10,000 miles, depending on driving conditions and your engine's condition. Check your owner's manual for the original recommendation and adjust based on the oil type you use.

What do I do with the old filter after removal?

Take it to an auto parts store or recycling center that accepts used oil filters. Many retailers accept them for free. Do not throw it in the trash—the oil inside is hazardous waste. Drain as much oil as possible into your drain pan before disposal.