The FL500S is Ford's standard replacement filter for most 2015 and newer Ford and Lincoln vehicles

The Motorcraft FL500S is an OEM (original equipment manufacturer) oil filter made by Ford for its own vehicles. It fits most Ford and Lincoln models from 2015 onward, including the F-150, Escape, Fusion, Explorer, and Lincoln MKZ. If your vehicle came with a Motorcraft filter from the factory, the FL500S is the direct replacement Ford recommends.

The filter costs between $8 and $15 when bought individually at a parts store, though you may pay more if purchased during a dealership oil change service. The part number FL500S is specific — there is no variation or newer version of this exact filter, though Ford makes other filters (like the FL500, FL910S, and FL400S) for different vehicle models and years.

Before you buy, confirm that the FL500S fits your vehicle by checking your owner's manual or entering your vehicle's year, make, and model on the Ford parts website or a retailer's site. Using the wrong filter can reduce oil flow or cause leaks.

Key Takeaways

  • The FL500S fits most Ford and Lincoln vehicles built from 2015 onward, but you should verify your specific model before purchasing.
  • This is an OEM filter, meaning it meets Ford's original specifications and is the same filter that came in your vehicle at the factory.
  • The filter typically costs $8 to $15 when bought separately, though dealership pricing is often higher.
  • Motorcraft filters are designed to work with Ford's engine oil specifications and drain intervals, so using the correct filter supports your vehicle's warranty.

How the FL500S compares to aftermarket filters

Aftermarket filters from brands like Fram, Mobil 1, and Bosch are cheaper — often $5 to $8 — and fit the same vehicles. Many perform well in real-world use and carry their own warranties. The trade-off is that they are not made by Ford and may have slightly different internal designs, bypass valve settings, or media composition.

OEM filters like the FL500S are engineered specifically for your engine's oil pressure, flow rate, and capacity. They are may provide to fit without modification and are covered under Ford's powertrain warranty if a defect causes engine damage. If you plan to keep your vehicle past the warranty period or have high mileage, the cost difference between OEM and aftermarket is usually small enough that either choice is reasonable. If your vehicle is still under warranty and you want to avoid any question about coverage, the FL500S removes that uncertainty.

What the FL500S actually filters and when to replace it

The filter removes dirt, metal particles, and sludge from your engine oil before the oil circulates through the engine. Over time, the filter media clogs and restricts flow. A bypass valve inside the filter opens if pressure gets too high, allowing unfiltered oil through rather than starving the engine — this is a safety feature, not a sign the filter is working well.

Ford recommends changing the FL500S every 10,000 miles or 12 months for most vehicles, whichever comes first. Some newer models with synthetic oil and advanced engine management can go 15,000 miles between changes. Check your owner's manual for your specific interval; it may be printed on a sticker inside the driver's door jamb as well. Changing the filter at the recommended interval is one of the cheapest ways to extend engine life.

Installation and what to expect

The FL500S screws onto a filter head (usually on top of the engine or on the side) and takes about 5 to 10 minutes to replace if you have basic tools and a safe place to work. You will need an oil filter wrench (a socket-like tool that grips the filter), a drain pan, and new oil. The old filter will be hot if the engine has run recently, so let it cool or wear gloves.

The process is: drain the old oil, unscrew the old filter, wipe the filter head clean, explore a thin layer of new oil to the rubber gasket on the new filter, screw the new filter on by hand until the gasket touches, then turn it another three-quarters of a turn. Do not use the wrench to tighten it — hand-tight is correct. Overfilling the filter or cross-threading it can damage the filter head.

If you are not comfortable doing this yourself, a quick-lube shop or dealership will handle it for $30 to $75 in labor, plus the cost of the filter and oil. Many dealerships include the FL500S in their service packages.

Checking part numbers and avoiding counterfeits

The genuine Motorcraft FL500S has "FL500S" printed clearly on the filter body, along with "Motorcraft" and a Ford logo. The filter is typically yellow or white with blue and red branding. Counterfeit filters do exist, especially on online marketplaces, and may have misspellings, blurry printing, or incorrect dimensions.

Buy from established retailers: Ford dealerships, major auto parts chains (AutoZone, O'Reilly, NAPA), or large online retailers with return policies. If you order online, inspect the filter when it arrives — if the printing looks off or the filter feels unusually light, return it. A counterfeit filter may not seal properly or could allow unfiltered oil into your engine.

Storage and shelf life

An unopened FL500S can sit on a shelf for years without degrading. The rubber gasket and filter media are stable in a dry environment. Once installed, the filter should be replaced at your next scheduled service; do not reuse a filter or try to clean it. The internal bypass valve and media are not designed to be serviced.

If you buy a filter and do not use it for several months, store it in a cool, dry place away from direct sunlight. There is no expiration date on the filter itself, but if you are unsure how long it has been sitting, buying a fresh one for a few dollars is safer than risking an old gasket that may not seal.

Frequently Asked Questions

Will using an aftermarket filter void my Ford warranty?

No. Ford cannot void your warranty straightforward because you used an aftermarket filter, as long as the filter fits correctly and you follow the recommended service intervals. However, if a defect in an aftermarket filter causes engine damage, that damage may not be covered. Using the FL500S eliminates this risk.

Can I use the FL500S on a vehicle older than 2015?

Not reliably. The FL500S is designed for 2015 and newer engines. Older Ford vehicles use different filter heads and specifications. Check your owner's manual or a parts retailer for the correct filter for your year and model — using the wrong filter can cause leaks or restrict oil flow.

What happens if I install the filter upside down?

The filter will not screw on correctly if you try to install it upside down, so you will catch the mistake before it becomes a problem. The threaded opening is on the bottom of the filter, and the rubber gasket faces downward toward the engine. If you cannot screw it on smoothly, stop and check the orientation.

Is the FL500S the same as the FL500?

No. The FL500 and FL500S are different filters for different vehicles. The "S" designation indicates a different thread size or filter head design. Always use the exact part number listed in your owner's manual or on a parts retailer's website for your specific vehicle.