Purolator Boss filters are mid-range oil filters designed for standard maintenance intervals

The Purolator Boss is a conventional oil filter that sits between budget and premium options in Purolator's lineup. It uses a synthetic blend media and handles standard 3,000- to 5,000-mile oil change intervals on most vehicles, depending on your engine type and driving conditions. The filter costs roughly $8 to $15 retail, making it a reasonable middle ground if you want better filtration than the cheapest options without paying for a full synthetic filter.

Purolator is owned by Esterline Technologies and manufactures filters in the United States. The Boss line has been in production for years and is widely available at auto parts stores, big-box retailers, and online. It fits thousands of vehicle models across domestic and import brands.

Key Takeaways

  • Purolator Boss filters use synthetic blend media and work for standard oil change intervals of 3,000 to 5,000 miles on conventional oil.
  • The filter costs $8 to $15 depending on your vehicle model and where you buy it, making it a mid-range choice between budget and premium filters.
  • Boss filters fit most common vehicles, but you must match the filter to your specific engine size and model year using the part number.
  • The filter includes an anti-drainback valve to prevent oil starvation when you start the engine, and a bypass valve that opens if the filter clogs.

How the Purolator Boss filter compares to other Purolator lines

Purolator makes several filter lines at different price points. The Pure One is their budget option, typically $5 to $8, with basic media and no anti-drainback valve on some models. The Boss adds the anti-drainback valve and synthetic blend media for a few dollars more. At the top end, Purolator PureOne MAX and Purolator Synthetic filters cost $12 to $20 and are rated for extended intervals of 7,500 to 10,000 miles on synthetic oil.

If you run conventional oil and change it every 3,000 to 5,000 miles, the Boss is a reasonable choice. If you use synthetic oil or want to extend intervals to 7,500 miles or longer, a synthetic-rated filter makes more sense. If you want the lowest price and do not mind changing oil more often, the Pure One works fine.

What the anti-drainback valve does

The anti-drainback valve is a one-way flapper inside the filter that prevents oil from draining back into the engine block when the engine is off. Without it, the filter empties into the pan, and the next time you start the engine, the oil pump has to refill the filter before oil reaches the engine—a few seconds of running on low oil pressure.

The Boss filter includes this valve as standard. It is a small feature, but it reduces wear during cold starts and is especially useful if you live in a cold climate or have a long time between drives. Budget filters sometimes skip it to save a few cents.

Bypass valve and what happens if the filter clogs

Every oil filter has a bypass valve—a spring-loaded flapper that opens if the filter media gets too clogged to let oil through. When it opens, unfiltered oil flows directly to the engine to keep oil pressure up and prevent engine damage. This is a safety feature, not a sign the filter failed.

The bypass typically opens at 10 to 15 pounds per square inch of pressure difference across the filter. On the Boss, this happens when the filter is severely clogged—usually a sign you have gone too long between changes or the filter is the wrong size for your engine. If your oil pressure warning light comes on while driving, pull over and check your oil level first; if it is low, top it up. If the light stays on after that, the filter or oil pump may have a problem.

Matching the right Purolator Boss filter to your vehicle

Purolator Boss filters come in dozens of part numbers because different engines need different filter sizes and thread pitches. The filter must match your engine's mounting location and oil flow rate. Using the wrong size can cause leaks, poor filtration, or bypass valve problems.

Find your correct part number by entering your vehicle's year, make, and model on the Purolator website or at an auto parts store. Write down the part number before you buy. Do not assume two vehicles of the same brand use the same filter—a 2015 Honda Civic and a 2015 Honda Accord use different filters. If you are unsure, ask the parts counter to confirm the number matches your vehicle's engine.

Installation and disposal

Installing an oil filter takes five to ten minutes. Locate the filter (usually on the side or top of the engine), place a drain pan underneath, and unscrew the old filter by hand. Wipe the mounting surface clean with a rag, then hand-tighten the new filter until the rubber gasket touches the engine, then turn it another three-quarters of a turn. Do not use a wrench—hand-tight is correct.

The old filter contains used oil and should be recycled, not thrown in the trash. Most auto parts stores take used filters for free if you buy a new one there. Some recycling centers also accept them. Never pour the oil from the old filter down a drain or into the ground.

Cost and where to buy

Purolator Boss filters typically cost $8 to $15 at retail, depending on your vehicle model and the retailer. Larger engines and less common vehicles sometimes cost more. Online retailers like Amazon and RockAuto often have lower prices than local auto parts stores, but you pay for shipping unless you may have access to for free delivery. Local stores let you pick up the same day and sometimes price-match online offers.

If you buy the filter at a shop that does oil changes, labor usually runs $30 to $75 depending on location and whether you need other services. Doing the job yourself saves labor but requires a drain pan, wrench, and a safe place to work.

Frequently Asked Questions

Can I use a Purolator Boss filter with synthetic oil?

Yes, the Boss filter works with synthetic oil, but it is not rated for extended intervals. Stick to 3,000- to 5,000-mile changes even with synthetic oil. If you want to run synthetic and extend to 7,500 or 10,000 miles, use a Purolator Synthetic or PureOne MAX filter instead.

How do I know if the filter is installed too tight?

Hand-tight is the correct tension. If you use a wrench and tighten it more, you risk cracking the filter housing or the gasket, which causes leaks. When you change the oil next time, the old filter should come off by hand with moderate pressure—if it is stuck, it was over-tightened.

What is the difference between the Purolator Boss and the PureOne MAX?

The PureOne MAX uses full synthetic media and is rated for 10,000-mile intervals on synthetic oil, while the Boss uses synthetic blend media and is rated for 5,000-mile intervals on conventional oil. The MAX costs $3 to $5 more but lasts longer if you use synthetic oil.

Do I need to change the filter every time I change the oil?

Yes. The filter traps contaminants and becomes less effective over time. Changing it with every oil change ensures you have fresh filtration and prevents the bypass valve from opening unnecessarily.

Where is the oil filter located on my vehicle?

Location varies by model. On most cars, it is on the side of the engine block. On some trucks and SUVs, it is on top or underneath. Check your owner's manual or search your vehicle's year and model online to find the exact location before you start.