The right oil filter depends on your Ram 1500's model year and engine
Ram 1500 trucks use different oil filters depending on the generation and engine you own. The most common filter for current-generation Ram 1500s (2019 and newer) is the Mopar 68157291AA, which fits the 5.7L V8 and 3.6L V6 engines. Older Ram 1500s (2009–2018) typically use the Mopar 68065981AA or 68065981AB. Some specialty engines, like the 5.0L V8 in certain years, may use a different part number.
The easiest way to confirm which filter your truck needs is to check your owner's manual or look at the filter currently installed—the part number is printed on the canister. You can also call a Ram dealer with your VIN, or search your vehicle's specs on the Mopar parts website. Using the wrong filter can restrict oil flow or cause it to bypass the engine entirely, so matching the exact part number matters.
Key Takeaways
- Current Ram 1500s (2019+) typically use Mopar 68157291AA; older models use 68065981AA or 68065981AB, but your owner's manual or current filter will confirm the right part.
- Oil filters should be replaced every time you change the oil, which Ram recommends every 10,000 miles under normal driving or 3,000 miles if you tow frequently.
- Genuine Mopar filters cost between $8 and $15 and are available at Ram dealers, auto parts stores, and online retailers.
- The filter wrench size for Ram 1500s is typically 74 mm, though some aftermarket filters may vary slightly.
Where to buy Ram 1500 oil filters
Genuine Mopar filters are sold at Ram dealerships, but you will usually pay a premium there. Auto parts chains like AutoZone, O'Reilly, NAPA, and Advance Auto Parts stock the correct filters and often have them in stock same-day. Online retailers including Amazon, RockAuto, and Walmart also carry them, though shipping times vary.
Aftermarket filters from Fram, Motorcraft, Bosch, and Purolator are cheaper—often $5 to $10—and fit Ram 1500s, but they may not meet the same pressure-relief specifications as Mopar parts. If you change your own oil, buying the filter at the same time as your oil saves a trip. If a dealer or shop does the work, they will typically charge $10 to $25 for the filter plus labor.
How to identify the correct filter for your Ram 1500
Start by locating your current filter. On most Ram 1500s, it sits on the driver's side of the engine block, accessible from above or the side. The part number is stamped or printed directly on the canister. Write down that number and search it on the Mopar website or call your local Ram dealer to confirm it is the current specification for your model year.
If you do not have a filter installed or cannot read the number, use your VIN. Ram dealers can look up the exact filter specification in seconds using your vehicle identification number. You can also cross-reference your engine size and model year on the Mopar parts catalog online. Never guess—installing the wrong filter can cause oil starvation or overpressure in the engine.
Filter replacement intervals for Ram 1500 trucks
Ram recommends changing the oil filter every time you change the oil. For normal driving, that is every 10,000 miles. If you tow a trailer, drive in dusty conditions, or make frequent short trips, Ram suggests every 3,000 to 5,000 miles. Check your owner's manual for the exact interval that applies to your driving habits.
Skipping a filter change when you change the oil defeats the purpose of the oil change—the old filter still contains dirt and metal particles that will circulate through fresh oil. Replacing both together is the standard practice and costs little extra. If you drive fewer than 10,000 miles per year, change the filter at least once annually, even if you have not hit the mileage interval.
Aftermarket versus Mopar filters: what the differences are
Genuine Mopar filters are engineered to Ram's specifications and tested to handle the pressure and flow rates of your engine. They use a specific micron rating (how fine the filter mesh is) and pressure-relief valve setting that match your truck's oil system. Aftermarket filters from major brands like Fram and Bosch are less expensive and work adequately for most drivers, but they may have slightly different relief pressures or filtration ratings.
The practical difference is small for normal driving. Aftermarket filters will not damage your engine if they are the correct size and thread pattern. However, if you tow heavy loads, drive in extreme heat, or plan to keep your Ram 1500 past 150,000 miles, sticking with Mopar filters removes any doubt about compatibility. The cost difference—usually $5 to $10 per filter—is worth the peace of mind if longevity is your priority.
Tools and supplies you need to change the filter yourself
If you plan to change the filter yourself, you will need an oil filter wrench (typically 74 mm for Ram 1500s, though measure your current filter to be sure), a drain pan to catch old oil, and a new filter. Some people also use a filter socket that attaches to a ratchet, which gives better leverage in tight spaces. A jack and jack stands are necessary if you need to access the filter from underneath.
Before you start, warm the engine slightly—warm oil drains faster and the filter comes off more easily. Loosen the filter by hand first if possible; if it is stuck, the wrench will help. Hand-tighten the new filter until the rubber gasket touches the engine, then turn it another three-quarters of a turn. Do not over-tighten, which can damage the gasket and make removal difficult next time.
Frequently Asked Questions
Can I use any oil filter that fits the thread size on my Ram 1500?
Thread size alone is not enough. The filter must also match the pressure-relief valve setting and micron rating of your engine. Using the wrong filter can cause oil to bypass the filter element entirely or restrict flow. Always confirm the part number matches your model year and engine size before installing.
How often should I replace my Ram 1500 oil filter if I do not drive much?
Replace it at least once per year, even if you have not reached the mileage interval. Oil degrades over time, and the filter collects moisture and contaminants. Annual replacement ensures your engine is protected during storage or light-use periods.
What happens if I install the wrong oil filter on my Ram 1500?
A mismatched filter can restrict oil flow, causing the pressure-relief valve to open and bypass unfiltered oil directly to the engine. This accelerates wear on bearings and other components. In rare cases, a filter that is too small or has the wrong thread pitch can leak or come loose while driving.
Are Fram and Bosch filters safe to use on a Ram 1500?
Yes, major aftermarket brands are safe for normal driving. They meet industry standards and fit correctly. The trade-off is that they may not be optimized for Ram's specific oil system the way Mopar filters are. For most owners, the cost savings outweigh the minor difference in engineering.
Where is the oil filter located on a Ram 1500?
On most Ram 1500s, the filter is mounted vertically on the driver's side of the engine block, near the top. It is usually accessible from above without removing other components. Some model years may position it slightly differently, so check your owner's manual if you cannot locate it when ready.