Reset the light yourself or have the shop do it
Most vehicles display a maintenance light on the dashboard after a set number of miles or months to remind you an oil change is due. Once you complete the service, the light needs to be reset — either by you or by whoever performed the work. The method depends on your vehicle's make, model, and year. Some cars reset automatically after you drive a certain distance with fresh oil; most require a manual reset using the dashboard controls or a diagnostic tool.
If the shop that changed your oil didn't reset it, ask them to do so before you leave. Many shops include this as part of the service. If you changed the oil yourself, you'll need to reset it using your vehicle's menu system, a key sequence, or a scan tool. The process takes less than five minutes once you know the steps for your specific vehicle.
Key Takeaways
- The maintenance light resets manually on most vehicles through the dashboard menu or a key-turn sequence — the method varies by manufacturer.
- Some newer vehicles reset automatically after you drive 50 to 100 miles with fresh oil, so check your owner's manual before attempting a manual reset.
- If a shop performed your oil change, ask them to reset the light before you leave; most do this at no extra charge.
- A diagnostic scan tool can reset the light on any vehicle, but you only need one if your dashboard controls don't work or your manual doesn't explain the process.
Reset through your dashboard menu
Most modern vehicles let you reset the maintenance light using the steering wheel buttons and dashboard display. The exact steps differ by brand, but the general process is the same: access the vehicle settings menu, find the maintenance or service submenu, and select reset or clear.
On Toyota and Lexus vehicles, turn the key to the "On" position without starting the engine, press the odometer button on the steering wheel until the odometer display appears, then press and hold the button for three seconds. The display should flash and the light should turn off. On Honda and Acura, turn the key to "On," press the select button on the steering wheel to navigate to the maintenance menu, then press and hold select until you see a reset prompt.
Ford, GM, and Chrysler vehicles often use a similar approach through the steering wheel controls or the infotainment screen. Check your owner's manual for the exact button sequence — it usually takes between 5 and 15 seconds of holding or pressing a combination of buttons. If your vehicle has a touchscreen, the reset option is often buried in Settings > Vehicle > Maintenance or Service.
Automatic reset on newer vehicles
Some vehicles manufactured in the last five to ten years reset the maintenance light automatically after you drive 50 to 100 miles with fresh oil in the engine. This is more common on luxury brands like BMW, Mercedes-Benz, and Audi. If your vehicle has this feature, attempting a manual reset may not work or may interfere with the system's ability to track oil life accurately.
Before you try to reset the light manually, check your owner's manual or the manufacturer's website to see whether your model resets automatically. If it does, straightforward drive normally and the light should disappear on its own within a few days. If the light persists after 100 miles, then try a manual reset or contact the dealer.
Using a diagnostic scan tool
A diagnostic scan tool, also called an OBD-II scanner, can reset the maintenance light on any vehicle. These tools plug into the diagnostic port under your steering wheel and communicate with your vehicle's computer. Once connected, you navigate to the maintenance light or service reminder function and select reset.
You don't need a scan tool if your dashboard controls work and your manual explains the reset process. But if your vehicle doesn't respond to button sequences or your manual doesn't include reset instructions, a scan tool is the most reliable option. Basic OBD-II scanners cost between $25 and $100 and can be used on any vehicle. Some auto parts stores offer free scan tool use if you ask, though not all locations have the capability to reset service lights.
What to do if the light won't reset
If you've followed the correct reset procedure and the light remains on, the issue is usually one of three things: you didn't complete the sequence correctly, your vehicle requires a different method than your manual describes, or there's an actual maintenance issue the light is flagging.
Try the reset process a second time, watching for any beeps or flashes that indicate the system registered your input. If it still doesn't work, contact your vehicle's dealer or a shop with a diagnostic scanner. They can confirm whether the light is responding to reset commands or whether it's staying on because the vehicle's computer detected an actual problem — such as low oil pressure or an engine fault — that needs attention before the light will clear.
Why the shop should reset it for you
Most oil change shops, whether independent or chain locations, reset the maintenance light as part of the service. It takes them 30 seconds and they have the tools and knowledge to do it correctly. If you're paying for an oil change, this should be included.
If a shop didn't reset the light, ask them to do so before you drive away. If you've already left and the light is still on, call them back and ask them to reset it at no charge. If they refuse or claim they don't know how, that's a sign the shop may not be thorough with its work — consider using a different location next time.
Frequently Asked Questions
Will the maintenance light turn off on its own?
On most vehicles, no — the light stays on until you manually reset it or drive 50 to 100 miles on a newer model with automatic reset. Check your owner's manual to see if your vehicle resets automatically. If it doesn't, you'll need to reset it using your dashboard controls or a scan tool.
Can I ignore the maintenance light if I just changed my oil?
Yes, the light is just a reminder and won't affect how your vehicle runs. But it's better to reset it so you don't miss the next maintenance interval. If you ignore it and forget when your next oil change is due, you could miss an important service and damage your engine.
What if I reset the light but it comes back on when ready?
If the light reappears right away, the reset didn't take. Try the process again, making sure you follow every step in your manual. If it still doesn't work, use a diagnostic scan tool or have a dealer check whether there's an actual engine or maintenance fault the computer is detecting.
Do I need to reset the light if I use synthetic oil?
Yes. The maintenance light is based on mileage or time, not oil type. Synthetic oil lasts longer than conventional oil, but your vehicle's computer doesn't know which type you used — you still need to reset the light after every oil change so the reminder system stays accurate.
Can resetting the light damage my vehicle?
No. Resetting the light only clears the reminder; it doesn't change how your engine runs or affect any other systems. The light will come back on at the next scheduled interval based on your vehicle's mileage or time.