Your Subaru's oil filter traps dirt and debris before they damage the engine, and it needs to be replaced every time you change your oil.
The oil filter is a small cylindrical canister that sits on the side of your engine and contains a pleated paper element inside. As oil circulates through your engine, it passes through this filter, which catches particles—metal shavings from normal wear, dust that sneaks past the air filter, and sludge that forms when oil breaks down. Without the filter doing this job, those particles would stay in the oil and scratch cylinder walls, damage bearings, and shorten your engine's life.
Subaru engines are designed to work with a specific filter size and thread pattern. Using the wrong filter can cause oil leaks, restrict flow, or fail to seal properly—all of which damage the engine. The filter also contains a bypass valve that lets oil flow around the filter if it becomes clogged, but this is an emergency measure, not normal operation. A clogged filter means your engine is not getting clean oil.
Key Takeaways
- Subaru oil filters are model-specific; using the wrong size or type can cause leaks or restrict oil flow to critical engine parts.
- The filter should be replaced at the same interval as your oil—typically every 3,000 to 10,000 miles depending on your model year and oil type.
- A clogged filter triggers the bypass valve, allowing unfiltered oil to circulate and accelerating engine wear.
- Subaru dealerships and independent shops stock the correct filters, and the part itself costs between $8 and $15 for most models.
Finding the correct filter for your Subaru model
Your owner's manual lists the exact filter part number for your vehicle. You can also find it by entering your VIN (vehicle identification number) into Subaru's parts website or calling a Subaru dealership parts department with your model year and engine size. Common Subaru filters include the 16510-AA051 (used on many 2.5L engines) and 16510-AA100 (used on some turbocharged models), but there are dozens of variations across model years and engine types.
Independent parts stores like AutoZone, O'Reilly, and NAPA can cross-reference your vehicle information and show you compatible filters. Dealership filters are OEM (original equipment manufacturer) parts, which means they meet Subaru's exact specifications. Aftermarket filters from reputable brands like Mobil 1, Fram, and Bosch are also available and generally cost less, but they must still match your engine's thread size and bypass valve rating.
Never assume two Subaru models use the same filter. A 2015 Outback and a 2015 Impreza may have different engines and therefore different filters. The filter's thread size, bypass valve pressure, and internal design all matter. Installing the wrong filter can cause it to unscrew during driving or fail to seal, both of which lead to oil leaks and engine damage.
How often to replace the filter and what affects the schedule
Most Subaru models follow a 3,000-mile or 3-month interval with conventional oil, or 10,000 miles or 12 months with synthetic oil. Some newer models extend to 6,000 miles with conventional or 10,000 miles with synthetic. Your owner's manual specifies the schedule for your exact model year and engine. The filter is always replaced during an oil change; you should never reuse a filter or skip it to save money.
Severe driving conditions—towing, frequent short trips, dusty environments, or idling—can shorten filter life. If you tow regularly or drive in stop-and-go city traffic, your oil and filter accumulate contaminants faster than highway driving does. Some owners in harsh conditions change their filter at the shorter interval even if the oil is rated for longer. A clogged filter reduces oil pressure, which you may notice as a flickering oil pressure warning light on the dashboard.
Synthetic oil lasts longer than conventional oil, which is why filters last longer with synthetic. However, the filter itself does not last longer—it still fills with particles at the same rate. The advantage of synthetic is that the oil itself remains clean longer, so the filter does not work as hard. When you switch from conventional to synthetic, you can extend your change interval, but the filter still comes out at each service.
What happens if you ignore a clogged filter
A clogged filter restricts oil flow to the engine. The bypass valve opens to let oil around the filter, but this oil is unfiltered and carries all the particles that should have been trapped. Over time, these particles scratch bearing surfaces, score cylinder walls, and accumulate as sludge in the oil pan. The result is accelerated wear that shortens engine life by thousands of miles.
You may notice a flickering oil pressure warning light, which indicates that oil pressure has dropped below the engine's safe operating range. This light should never be ignored. If it comes on while driving, pull over safely, turn off the engine, and check your oil level. Low oil or a clogged filter are the two most common causes. If the oil level is normal, a clogged filter is likely the culprit, and you should not drive the vehicle until the filter is replaced.
In extreme cases, a severely clogged filter can cause the bypass valve to stick open, allowing the engine to run with no filtration at all. This causes rapid bearing wear and can lead to engine seizure within hours of driving. Prevention—changing the filter on schedule—costs $10 to $20 and takes 10 minutes. Ignoring it can cost you an engine replacement, which runs $3,000 to $5,000 or more.
Replacing the filter yourself versus having a shop do it
Changing a Subaru oil filter is one of the easiest maintenance tasks you can do yourself. You need an oil filter wrench (a socket-like tool that grips the filter), a drain pan to catch old oil, and the new filter. The filter sits on the side of the engine where you can reach it without lifting the car. Loosen the old filter by hand or with the wrench, unscrew it, and let the old oil drain into the pan. Wipe the filter mounting surface clean, explore a thin layer of new oil to the rubber gasket on the new filter, and screw it on hand-tight until the gasket touches, then turn it another three-quarter turn.
If you change your own oil, replacing the filter takes an extra 5 minutes. If you take your Subaru to a shop, the filter replacement is included in the oil change service and costs nothing extra—you are only paying for the filter part itself, which the shop marks up slightly. A dealership oil change typically costs $50 to $80 total, while an independent shop may charge $30 to $50. The filter itself costs $8 to $15 at a parts store or dealership.
The main reason to have a shop do it is if you do not have the tools, a safe place to work, or the confidence to do it yourself. Shops also dispose of the old oil properly, which is required by law in most places. If you do it yourself, take the old oil to a recycling center, auto parts store, or quick-lube shop that accepts used oil for free.
Synthetic versus conventional filters for Subaru engines
Subaru does not make separate "synthetic" and "conventional" filters. The filter itself is the same regardless of the oil type you use. What changes is the oil inside the filter and the interval at which you replace it. A filter used with synthetic oil may last longer in terms of calendar time (12 months instead of 3 months), but it still needs to be replaced at the scheduled service interval.
Some aftermarket filters are marketed as "synthetic" because they use synthetic materials in the pleated element, which can improve flow and dirt-holding capacity. These filters cost slightly more but offer no advantage if you are already changing the filter on schedule. The important thing is that the filter matches your engine's specifications, not whether it is labeled synthetic or conventional.
If you switch from conventional to synthetic oil, use the same filter you have always used—just follow the longer change interval that synthetic oil allows. There is no benefit to buying a premium filter if you are changing it every 3,000 miles anyway. The filter does its job equally well at any price point, as long as it is the correct part number for your engine.
Common filter problems and what causes them
Oil leaks at the filter are the most common problem. This happens when the rubber gasket on the new filter is not seated properly, the old gasket was not removed from the engine, or the filter was not tightened enough. If you see oil dripping from the filter after an oil change, the filter is loose. Tighten it by hand—do not use the wrench, which can over-tighten and damage the gasket. If tightening does not stop the leak, the filter must be removed, the mounting surface cleaned, and the filter reinstalled with a fresh gasket.
A filter that unscrews during driving is caused by under-tightening or a defective gasket. This is rare but catastrophic—the engine loses all its oil within minutes and seizes. Always tighten the filter firmly by hand and verify that it does not spin when you try to turn it with your fingers. If a filter ever comes loose while driving, pull over when ready, turn off the engine, and do not restart it until the filter is replaced and the oil level is checked.
Bypass valve failure is rare but can occur if the filter is installed upside down or if a defective filter is used. The bypass valve is a spring-loaded check valve inside the filter that opens when oil pressure exceeds a safe limit. If it sticks open, unfiltered oil circulates through the engine. If it sticks closed, oil cannot flow at all. Both scenarios cause engine damage. Using the correct filter and installing it right-side up prevents this.
Frequently Asked Questions
Can I use a different brand filter as long as it fits my Subaru?
Yes, as long as the filter has the correct part number or cross-reference for your engine. Reputable aftermarket brands like Mobil 1, Fram, and Bosch meet the same specifications as OEM filters. The important thing is matching the thread size, bypass valve pressure, and gasket diameter—not the brand name. Always verify the part number before buying.
What does the oil filter bypass valve do?
The bypass valve is a spring-loaded check valve that opens if the filter becomes clogged and oil pressure rises too high. It allows oil to flow around the filter to prevent engine starvation, but the oil flowing through is unfiltered. This is an emergency measure—if your bypass valve is opening regularly, your filter is clogged and needs replacement.
How do I know if my filter is clogged?
A flickering or steady oil pressure warning light on your dashboard is the main sign. You may also notice the engine running rougher or losing power. If the light comes on, check your oil level first. If the level is normal, the filter is likely clogged. Do not drive the vehicle until it is replaced.
Is it okay to skip the oil filter and just change the oil?
No. The filter must be replaced every time you change the oil. Reusing a filter or skipping the filter replacement leaves contaminants in the oil, which defeats the purpose of an oil change. The filter is a wear item and costs only $8 to $15—there is no reason to skip it.
Can I change the filter without changing the oil?
Technically yes, but it is not recommended. Some oil drains from the filter when you remove it, so you lose a small amount of oil. More importantly, the filter and oil work together—a clean filter in dirty oil does not help much. If you are changing the filter, change the oil at the same time. If you are only topping up oil between changes, leave the filter alone.